Remanufactured Semi-Loaded Brake Caliper to Distributor - Point Type - Remanufactured

• 7" TFT/LCD Active Matrix Video Monitor
• Built-in Quad Control Box Screen Function
• Supports Four Video Camera Inputs (V1/V2/V3/V4)
• Selectable Viewing Modes: Single Full View / Split Dual Video View / Quad Four Source View
• PAL/NTSC Video Format Compatible
• Reverse Image Function
• High Resolution: 480 x 234
• Operating Temperature: -20 to +65
• Wireless Full Function Remote Control
• Headrest Shroud for Flush Mounting

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.

• All electronic module components are 100% computer tested to ensure full functionality.
• O.E. components with consistently high failure rates are 100% replaced or repaired to meet or exceed O.E. performance.
• Cardone uses the right gear hardness for the appropriate application. If the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage – possibly even engine failure. Many offshore manufacturers use one gear hardness without varying by application as O.E. designs do.
• Precise machining tolerances prevent oil leakage, poor timing, setting of the "Check Engine" light, and premature failure.
• Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, crank reluctor tooth size, as well as ignition coil and pickup performance.

• Original Equipment Quality Parts
• Made in Korea
• Manufactured by ISO-14000, QS-9000, or ISO/TS-16949 certified suppliers

• Economical cover for basic indoor or limited outdoor protection
• Moisture, mold and UV resistant
• Will not scratch clean paint or clear coat, keeps vehicle clean from dust
• Lightweight and compact for easy storage
• 2-year warranty

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.

Federal-Mogul engineers have extensive experience in designing components to accommodate changes in the engine due to wear. By leveraging this expertise, Sealed Power components ensure unmatched performance and reliability. In fact, Sealed Power's full range of engine components incorporate advanced in-house engineering and machining technologies combined with proprietary metallurgies that can improve fuel economy, reduce emissions and add durability to both gasoline and diesel engines.

Professionals trust Sealed Power components for both premium passenger car and light truck rebuilds. They meet or exceed the industry's toughest standards. Rely on Sealed Power products for your next engine rebuild or repair.

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.

• Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
• Direct replacement for a trouble-free installation
• Steel, iron or aluminum construction ensures durability
• Powder-coated or painted for long-lasting rust and corrosion resistance

• All electronic module components are 100% computer tested to ensure full functionality.
• O.E. components with consistently high failure rates are 100% replaced or repaired to meet or exceed O.E. performance.
• Cardone uses the right gear hardness for the appropriate application. If the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage – possibly even engine failure. Many offshore manufacturers use one gear hardness without varying by application as O.E. designs do.
• Precise machining tolerances prevent oil leakage, poor timing, setting of the "Check Engine" light, and premature failure.
• Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, crank reluctor tooth size, as well as ignition coil and pickup performance.

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.

• Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
• Lock ring included with each tank to reduce installation time and to ensure a complete repair
• Made with corrosion resistant, OE approved, Ni Terne steel for durability
• Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
• Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
• Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
• Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
• Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.

• All electronic module components are 100% computer tested to ensure full functionality.
• O.E. components with consistently high failure rates are 100% replaced or repaired to meet or exceed O.E. performance.
• Cardone uses the right gear hardness for the appropriate application. If the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage – possibly even engine failure. Many offshore manufacturers use one gear hardness without varying by application as O.E. designs do.
• Precise machining tolerances prevent oil leakage, poor timing, setting of the "Check Engine" light, and premature failure.
• Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, crank reluctor tooth size, as well as ignition coil and pickup performance.