Suspension Control Arm and Ball Joint Assembly to Engine Control Module

• Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
• Direct replacement for a trouble-free installation
• Steel, iron or aluminum construction ensures durability
• Powder-coated or painted for long-lasting rust and corrosion resistance

• The ultimate best quality indoor cover
• 4-layers thick helps prevent dents and dings
• Same soft material used in baby diapers, superior softness and strength
• Almost totally dust-proof
• 4-year warranty

• 100% exhaustive multipoint quality and performance testing ensures cranking and starting performance under virtually all temperature extremes
• 100% replacement of all bearings/bushings with new high-quality friction-reducing components provides balanced high-speed torque for maximum performance and dependability
• Armature/commutator is remachined to tough concentricity standards to help increase brush life and maximize starting power
• Solenoids include 100% new high-temperature caps, contacts, copper windings and terminal hardware which results in less battery draw which thus results in faster starts with maximum voltage

• Sealed Main Body Prevents Rusting From Inside Out
• Open Back End On Receiver For Easy Cleaning
• One-Piece Collar Reduces Rust And Ensures Strength
• Exceeds V-5 Standards
• Exceeds V-5 Standards
• Robotic Welding For Superior Strength And Fit
• Limited Lifetime Warranty To Original Purchaser

• Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
• Product come with installation instructions, wiring harness and installation hardware where applicable
• Includes strainers for smoother installation process and ensures a clean fuel system upon replacement
• Precision tested fuel level sensor ensures vehicles fuel gauge will provide an accurate reading at any fuel level
• Tested for voltage, amperage, resistance, pressure, and volume to ensure product performance and quality
• Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
• Award winning packaging; double layer walls for added strength and projection; new inflated bubble packaging-condensed individual vertical air chambers for added protection
• Engineered and developed by Spectra Premium; proud member of the A.A.S.A. fuel pump manufacturers working group

• MAF Sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate scan tool readings for proper operation.
• 100% resolder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
• 100% computer testing ensures reliable performance.

• The ultimate best quality indoor cover
• 4-layers thick helps prevent dents and dings
• Same soft material used in baby diapers, superior softness and strength
• Almost totally dust-proof
• 4-year warranty

• Sealed Main Body Prevents Rusting From Inside Out
• Open Back End On Receiver For Easy Cleaning
• One-Piece Collar Reduces Rust And Ensures Strength
• Exceeds V-5 Standards
• Exceeds V-5 Standards
• Robotic Welding For Superior Strength And Fit
• Limited Lifetime Warranty To Original Purchaser

• Sealed Main Body Prevents Rusting From Inside Out
• Open Back End On Receiver For Easy Cleaning
• One-Piece Collar Reduces Rust And Ensures Strength
• Exceeds V-5 Standards
• Exceeds V-5 Standards
• Robotic Welding For Superior Strength And Fit
• Limited Lifetime Warranty To Original Purchaser

• The ultimate best quality indoor cover
• 4-layers thick helps prevent dents and dings
• Same soft material used in baby diapers, superior softness and strength
• Almost totally dust-proof
• 4-year warranty

Omix-ADA is more than just a parts manufacturer, they're a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world's roughest terrain for about two decades. Omix's team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you.

Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

• All electronic module components are 100% computer tested to ensure full functionality.
• O.E. components with consistently high failure rates are 100% replaced or repaired to meet or exceed O.E. performance.
• Cardone uses the right gear hardness for the appropriate application. If the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage – possibly even engine failure. Many offshore manufacturers use one gear hardness without varying by application as O.E. designs do.
• Precise machining tolerances prevent oil leakage, poor timing, setting of the "Check Engine" light, and premature failure.
• Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, crank reluctor tooth size, as well as ignition coil and pickup performance.

• The ultimate best quality indoor cover
• 4-layers thick helps prevent dents and dings
• Same soft material used in baby diapers, superior softness and strength
• Almost totally dust-proof
• 4-year warranty

In North America, Bosal designs, develops, and manufactures original equipment exhaust systems for carmakers such as GM and Ford. Bosal supplies OE service products to many import / transplant carmakers including VW, Honda, Volvo, Subaru, and Mazda. Bosal also develops high performance exhaust for OEM port of entry and dealer programs.

Bosal pioneered the manufacture of one-piece, direct-fit replacement exhaust systems more than twenty-five years ago. Today, Bosal remains the leader in direct-fit exhaust systems for import vehicles, and has expanded their program to include direct-fit catalytic converters for both the import and domestic aftermarket. Included in the catalytic converter program is their new line of Bosal Super-Cats and our most recent addition - Bosal's line of CARB Approved Catalytic Converters.

Product Features:

• One Piece, Direct Fit Unit that eliminates the need for cutting, pipe bending, or welding.

• The ultimate best quality indoor cover
• 4-layers thick helps prevent dents and dings
• Same soft material used in baby diapers, superior softness and strength
• Almost totally dust-proof
• 4-year warranty

Walker has been a driving force of innovation over the past century. The brand's history of innovative engineering includes such "firsts" as the louvered-tube muffler, stainless steel muffler, aluminized exhaust products, and chambered-tube mufflers. These advantages continue today in virtually every premium Walker exhaust and emission control component. For Walker, innovation drives performance and satisfied customers.

• Sealed Main Body Prevents Rusting From Inside Out
• Open Back End On Receiver For Easy Cleaning
• One-Piece Collar Reduces Rust And Ensures Strength
• Exceeds V-5 Standards
• Exceeds V-5 Standards
• Robotic Welding For Superior Strength And Fit
• Limited Lifetime Warranty To Original Purchaser

Omix-ADA is more than just a parts manufacturer, they're a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world's roughest terrain for about two decades. Omix's team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you.

Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

• The ultimate best quality indoor cover
• 4-layers thick helps prevent dents and dings
• Same soft material used in baby diapers, superior softness and strength
• Almost totally dust-proof
• 4-year warranty

• Sealed Main Body Prevents Rusting From Inside Out
• Open Back End On Receiver For Easy Cleaning
• One-Piece Collar Reduces Rust And Ensures Strength
• Exceeds V-5 Standards
• Exceeds V-5 Standards
• Robotic Welding For Superior Strength And Fit
• Limited Lifetime Warranty To Original Purchaser

• The ultimate best quality indoor cover
• 4-layers thick helps prevent dents and dings
• Same soft material used in baby diapers, superior softness and strength
• Almost totally dust-proof
• 4-year warranty