Brake Master Cylinder to Alternator - Remanufactured - 5 Amps

100% new to ensure durability and long life. Helps restore proper brake performance. Matches OEM cylinder material and casting.

Restore proper fuel gauge readings with Dorman’s Fuel Tank Sending Unit. All units include the necessary installation hardware and lock rings for a bolt- off/bolt on solution. Since this part is direct replacement, the exact fit adds another layer of convenience.

Product Features:

• Gasket and lock ring included for ease of replacement
• Corrosion resistant
• Leak resistant
• Durable steel and plastic construction for long-lasting use

From the leader in aftermarket engine sealing, FEL-PRO the gaskets professionals trust.

Product Features:

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

Direct replacement for the OE part. No modification needed for installation. It's recommended that you repair power steering fluid leaks as soon as they are discovered, considering that some power steering fluids are as flammable as gasoline.

This OEM-quality replacement can be installed in as little as an hour using common hand tools. It makes use of the original holes and does not require the drilling of new holes. Interchangeable with OE wiring harness. Tested to fit your vehicle and function like the OE part. Fully legal and in compliance with all federal regulations.

Beck/Arnley remanufactured alternators have all new bearings, bushings and brushes. Slip rings are replaced or remachined and cases are polished, coated or plated. All Beck/Arnley alternators are clocked with pulleys for specific vehicle applications and then tested.

This high-quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. This part is manufactured to meet or exceed OEM specifications.

This OEM-quality replacement can be installed in as little as an hour using common hand tools. It makes use of the original holes and does not require the drilling of new holes. Interchangeable with OE wiring harness. Tested to fit your vehicle and function like the OE part. Fully legal and in compliance with all federal regulations.

From the leader in aftermarket engine sealing, FEL-PRO the gaskets professionals trust.

Product Features:

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

Beck/Arnley partners with wholesale distributors, who service jobbers, and retailers to deliver parts made right for technicians. These technicians service the maintenance and repair market for foreign nameplate vehicles. Beck/Arnley is the import brand supplier of premium, quality import parts for cars, light trucks and SUVs. They source one part at a time by each application, finding the best part for a specific model and year.

Whether Asian or European vehicles, Beck/Arnley provides OE quality parts from around the world, from over 400 manufacturers working with a database of 800 sources. Beck/Arnley product specialists and experienced sourcing experts follow a unique research, analysis and procurement process known as Application Specific Sourcing. Using proven global sourcing expertise, they source parts from the OE supplier or approved manufacturer to supply their distributors. Beck/Arnley delivers exceptional value to service technicians.

Walker, one of the core brands of Tenneco, builds upon its worldwide OE partnerships and manufacturing facilities to deliver OE look, fit and dependability. Walker's worldwide network of full-service engineering and development centers span five continents and allows Walker to bring new products and the latest technologies to the market faster. With this world-class support, Walker possesses the technical excellence needed to meet today's needs while developing solutions to tomorrow's challenges.

Walker has been a driving force of innovation over the past century. The brand's history of innovative engineering includes such "firsts" as the louvered-tube muffler, stainless steel muffler, aluminized exhaust products, and chambered-tube mufflers. These advantages continue today in virtually every premium Walker exhaust and emission control component. For Walker, innovation drives performance and satisfied customers.

RPT "All New" Distributors deliver powerful consistent OE spark for maximum combustion efficiency, accurate timing, and rock solid high-rpm performance. From traditional points-style distributors to the latest magnetic, optical, and sync signal designs, we’ve got the right option from which to choose.

Product Features:

• Includes NEW OE style cap and NEW rotor - ready to install!
• All electronic module components are 100% computer tested to ensure full functionality.
• Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, crank reluctor tooth size, as well as ignition coil and pickup performance.
• PT uses the correct gear hardness for the appropriate application. If the gear is too hard, it can damage the cam; if it's too soft, the gear itself can be damaged, which ultimately can cause severe engine damage - possibly even complete engine failure.

For more than a century, Delphi has been making the parts cars are born with - often developing new technologies in the process. Delphi is proud of its OE heritage, and over the years they’ve used that experience to expand into a global aftermarket supplier.

Product Features:

• Lower amperage draw means less load on vehicle's electrical system
• Restores fast pressure performance and system integrity, translating to better pumping through less energy
• Lower failure rates due to its innovative design and durability
• Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends

From the leader in aftermarket engine sealing, FEL-PRO the gaskets professionals trust.

Product Features:

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

Solenoids, bushings and brushes replaced 100% new. Cases are cleaned, shot-blasted and painted. All units are 100% load tested to OEM specifications on state-of-the-art computerized equipment.

Designed to fit Hooker Competition header, Manifold or catalytic converter back applications. Cat-back kits install behind the converter and all other applicable emission control devices.

Product Features:

• Reducer Flex-Tubes
• Reduces Backpressure
• Hardware Included
• Instructions Included

Dorman's Window Regulators have been re-engineered to improve on the original design. The latest technological advances in motors, materials and cable systems have been applied to new and previously released applications.

Product Features:

• Engineered improvements enhance performance
• Quality tested to ensure trouble free installation, performance, and durability
• Plug & Play – No wire splicing necessary
• Features Anti-Pinch technology (where applicable) – Safety feature reduces risk to passengers

ThermoQuiet riveted brake shoe set.

Product Features:

• OE fit, form and function

Our condensers are designed and tested to meet or exceed OE specifications for form, fit, and function. Using premium quality materials and a clear focus on the highest heat transfer performance possible, our engineers have designed this condenser to perform at the highest standards for all refrigerants.

Wagner brake master cylinders are manufactured to meet or exceed original equipment specifications.

Walker, one of the core brands of Tenneco, builds upon its worldwide OE partnerships and manufacturing facilities to deliver OE look, fit and dependability. Walker's worldwide network of full-service engineering and development centers span five continents and allows Walker to bring new products and the latest technologies to the market faster. With this world-class support, Walker possesses the technical excellence needed to meet today's needs while developing solutions to tomorrow's challenges.

Walker has been a driving force of innovation over the past century. The brand's history of innovative engineering includes such "firsts" as the louvered-tube muffler, stainless steel muffler, aluminized exhaust products, and chambered-tube mufflers. These advantages continue today in virtually every premium Walker exhaust and emission control component. For Walker, innovation drives performance and satisfied customers.

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:

• Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
• Lock ring included with each tank to reduce installation time and to ensure a complete repair
• Made with corrosion resistant, OE approved, Ni Terne steel for durability
• Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
• Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
• Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
• Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
• Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation

Sealed Power engine products are a complete system of application-engineered internal replacement components, including pistons, piston rings, engine bearings, camshafts, oil pumps, timing components and valvetrain products. These proven replacement parts are the result of nonstop product development efforts, dedicated to putting only the absolute best on the street.

Federal-Mogul engineers have extensive experience in designing components to accommodate changes in the engine due to wear. By leveraging this expertise, Sealed Power components ensure unmatched performance and reliability. In fact, Sealed Power's full range of engine components incorporate advanced in-house engineering and machining technologies combined with proprietary metallurgies that can improve fuel economy, reduce emissions and add durability to both gasoline and diesel engines.

Professionals trust Sealed Power components for both premium passenger car and light truck rebuilds. They meet or exceed the industry's toughest standards. Rely on Sealed Power products for your next engine rebuild or repair.