Relay Accessory to Window Lift Gear Kit - New

• Premium Unloaded/Semi-Loaded/Loaded
• OEM Grade Rubber Components
• Correct OEM Specified Piston Material
• Essential Mounting Hardware Included
• Exclusive Rustproof Coating

• 70 rollers
• 0_timing marks
• Component meets or exceeds O.E.M. specifications in manufacturing and material

• Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
• Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
• OE vane configuration to dissipate heat, increasing pad life.
• Proper harmonic design helps to reduce brake noise.
• Non-directional finish for less break-in time and reduced brake noise.
• Ready for immediate "out-of-the-box" installation (after cleaning)
  
  Advance Auto Parts Rotor Tips:

  • Recommend using Wearever Brake Clean to remove residual manufacturing oils prior to installation.
  • Always use a torque wrench to tighten wheel bolts to the manufacturers'' specifications to prevent pedal pulsation.
  • Always replace rotors in pairs to improve stopping power.

• Helps Prevent Damage to Lights
• Custom Aerodynamic Design
• Perfect Fit
• Easy to Install and Remove
• For Off-Road and Show Use Only
• Check Local Laws for Restrictions
• No Drill Installation
• Limited Lifetime Warranty

• Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
• Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
• OE vane configuration to dissipate heat, increasing pad life.
• Proper harmonic design helps to reduce brake noise.
• Non-directional finish for less break-in time and reduced brake noise.
• Ready for immediate "out-of-the-box" installation (after cleaning)
  
  Advance Auto Parts Rotor Tips:

  • Recommend using Wearever Brake Clean to remove residual manufacturing oils prior to installation.
  • Always use a torque wrench to tighten wheel bolts to the manufacturers'' specifications to prevent pedal pulsation.
  • Always replace rotors in pairs to improve stopping power.

• Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, crank reluctor tooth size, as well as ignition coil and pickup performance.
• Precise machining tolerances prevent oil leakage, poor timing, setting of the "Check Engine" light, and premature failure.
• Cardone uses the right gear hardness for the appropriate application. If the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage – possibly even engine failure. Many offshore manufacturers use one gear hardness without varying by application as O.E. designs do.
• O.E. components with consistently high failure rates are 100% replaced or repaired to meet or exceed O.E. performance.
• All electronic module components are 100% computer tested to ensure full functionality.

• Problem Solver® powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
• MOOG® engineered steel composition results in a stronger component.
• Full ball metal stud provides 360 degrees of smooth, consistent, rotational movement resulting in more responsive steering.
• Belleville washer preload provides lower torque and stud articulation with minimal axial clearance.
• An enlarged ball joint receptacle in the lower control arm can cause a loose ball joint fit. MOOG® Problem Solver® design includes an oversized housing for a more secure fit.
• Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.

Includes one OTC1125 (.038" diameter) and one OTC1345 (.070"dia) 45 degree pliers

• Save an average of 54% over factory cost
• Look and fit of a factory mirror
• Installation is easy - remove your existing mirror, and attach the replacement mirror
• QS9000 and ISO 9002 certified
• Details: Driver Side; Manual Remote; Flat glass; Non-foldaway, Non-heated; Black

• All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
• Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
• Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
• 1-3/16" Bore: Larger bore than most shocks to provide more efficient and consistent control.
• Twin Technology: Impact Control Valve (ICV), delivers exceptional control under virtually all driving conditions, and patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
• 1/2" Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
• Special Seal: "Self-lubricating" fluid seal designed to retain gas without excessive wear or friction.

• 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
• Exclusive rust-prohibitive finishing process extends unit life.
• Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
• New mounting nuts and washers ensure proper, hassle-free installation.
• All units are 100% vacuum tested to ensure reliable performance.

• Multi-stage tested for durability
• Pre-certified factory relief walls
• Precision ground and tested CAM packs
• Tested OEM Grade Seals and O'rings

Walker has been a driving force of innovation over the past century. The brand's history of innovative engineering includes such "firsts" as the louvered-tube muffler, stainless steel muffler, aluminized exhaust products, and chambered-tube mufflers. These advantages continue today in virtually every premium Walker exhaust and emission control component. For Walker, innovation drives performance and satisfied customers.

• Wrap-Around Design for Sleek Aero-dynamic Appear.
• Made of Impact Modified Acrylic
• Car-Wash Safe
• Helps Prevent Damage to Hood
• Protects Windshield and Fenders
• No Drill Installation
• Limited Lifetime Warranty

• Exclusive SoundLock Plus 4-layer shim featuring a diamond-patterned, premium rubber layer that locks in sound ensuring silent braking
• Highest grade, commercial ceramic friction formula manufactured in Original Equipment Specs for Superior Stopping Power
• Cleanest Wheel Technology featuring a new formula for significant dust reduction
• Everything you need for the complete brake job. Lube, hardware & wear sensors are in the box where applicable

• Cardone Select Engineered (CSE) Technology ensures that all window lift motors meet or exceed O.E. form, fit and function.
• 100% Load Testing ensures performance every time.
• Units are designed with extra torque motors to prevent premature failure resulting from improperly lubricated window lift regulators.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Brushes are precisely designed to ensure armature and contacts are properly matched
• Improved over O.E. - Cardone Select Gears are designed with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.