Oxygen Sensor to OESpectrum Strut Cartridge

• Problem Solver® powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
• MOOG® engineered steel composition results in a stronger component.
• Full ball metal stud provides 360 degrees of smooth, consistent, rotational movement resulting in more responsive steering.
• Belleville washer preload provides lower torque and stud articulation with minimal axial clearance.
• An enlarged ball joint receptacle in the lower control arm can cause a loose ball joint fit. MOOG® Problem Solver® design includes an oversized housing for a more secure fit.
• Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

Ride Comfort is important, but restoring a vehicle’s Ride Control; stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks & Struts are designed for the most important performance purpose: Restore the vehicle’s original capabilities. KYB is the world’s largest supplier of shocks and struts to new vehicle manufacturers. The Excel-G is made on the same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That earned Excel-G this classification: OEA (Original Equipment for the Aftermarket ). The KYB Excel-G is a Nitrogen gas-charged twin-tube design that includes every quality component that our global OEM products include.

Product Features:

• A seamless working cylinder vs. welded seams provides the best sealing surface throughout the entire piston stroke
• Precision multi-stage hydraulic valves that reduces fluid travel to minimize aeration and are calibrated the way OE intended the vehicle to perform
• Triple chrome-plated piston rod and multi-lip oil seals that reduce wear
• Solid, seamless mounting eye rings and bolt bushings that can’t separate and become noisy
• Chemically bonded insulator mounting bushings that won’t slip out
• A Teflon coated or phenolic piston band that reduces friction and provides a positive cylinder seal
• Specially formulated hydraulic fluid with multi-range viscosity for any weather climate

• Includes spring and clips (where applicable)
• Smooth or textured surface available
• Chrome-plating available (where applicable)
• Available for front and rear driver and passenger sides

• Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E. form, fit and function.
• All products are completely disassembled, thoroughly cleaned and inspected. All components are renewed or replaced as necessary to ensure high quality and durability.
• All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance.
• When applicable improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life, less cost and less down-time for the driver.

• Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE expertise
• Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
• Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
• Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
• Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
• Road tested to ensure real world performance and to verify that each designs meets our high standards for quality
• Coating salt spray tested for over 200 hours to insure durability

• Available in many head styles including round, flat, pan, oval, truss, and hex
• Slotted, Phillips, Hex, Square, and a multitude of other varieties available
• Thread varieties include Machine Screw, Sheet Metal Screw, Self-Tapping, and others
• A large selection of diameters, lengths and quantities available in different assortments and/or kits

• Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
• Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
• OE vane configuration to dissipate heat, increasing pad life.
• Proper harmonic design helps to reduce brake noise.
• Non-directional finish for less break-in time and reduced brake noise.
• Ready for immediate "out-of-the-box" installation (after cleaning)
  
  Advance Auto Parts Rotor Tips:

  • Recommend using Wearever Brake Clean to remove residual manufacturing oils prior to installation.
  • Always use a torque wrench to tighten wheel bolts to the manufacturers'' specifications to prevent pedal pulsation.
  • Always replace rotors in pairs to improve stopping power.

• Original Equipment Quality Parts
• Made in Korea
• Manufactured by ISO-14000, QS-9000, or ISO/TS-16949 certified suppliers

• Problem Solver® powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
• Problem Solver® patented cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life part.
• Exclusive cover plate protects against contaminants leaking into the bearing surface.
• MOOG® engineered steel composition results in a stronger component.
• Full ball metal stud provides 360 degrees of smooth, consistent, rotational movement resulting in more responsive steering.
• Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.

• Cardone Select Engineered (CSE) Technology ensures that all window lift motors meet or exceed O.E. form, fit and function.
• 100% Load Testing ensures performance every time.
• Units are designed with extra torque motors to prevent premature failure resulting from improperly lubricated window lift regulators.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Brushes are precisely designed to ensure armature and contacts are properly matched
• Improved over O.E. - Cardone Select Gears are designed with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.

• Designed to increase horsepower and acceleration
• Show-quality part with a custom chrome top and base
• Washable and reusable lifetime air filter
• Offers high airflow with excellent filtration

Professional technicians trust and value MOOG because of their reputation for solving problems. Vehicle owners who use MOOG parts enjoy responsive handling and the return of a "like-new" feel to their steering. And for more than 40 years, every NASCAR Cup champion has relied on MOOG ball joints for performance and durability.

Federal-Mogul MOOG chassis parts improve upon existing designs to deliver a "problem-solving" replacement product. MOOG is constantly working to develop new products that improve steering performance. The innovations Federal-Mogul engineers develop for the track, are reapplied for the street. Federal-Mogul has been the recognized leader in steering solutions for NASCAR for years.

• Designed to meet or exceed OES design requirements
• Fit and functionality for today's engines
• Feature necessary accessories, silicone content and boot designs

Recognized by both the original equipment and the automotive aftermarket as an innovative, technologically driven organization, Dayco operates a fully integrated global network of technical facilities and sales offices employing a workforce of nearly 3,100. Dayco continues to be guided by the same primary business strategy established over 100 years ago: to anticipate and satisfy the needs of our customers by providing timely, quality products and services.

• Cardone Select Engineered (CSE) Technology ensures that all master cylinders meet or exceed O.E. form, fit and function.
• Life-cycle testing ensures that every master cylinder exceeds S.A.E. stroke requirements.
• All cylinder bores are micro-finished to precise specifications to dramatically reduce wear and promote long service life.
• Seals are temperature-cycled from -30°F to +220°F to ensure leak-free, reliable performance under harsh under-hood conditions.
• EPDM seals and O-rings meet O.E. quality standards to ensure reliable, leak-free performance.
• Rubber components are tested to comply with stringent S.A.E. specifications.
• Aluminum castings are designed to precision tolerances to ensure like-new performance.
• Aluminum castings are designed to precision tolerances to ensure like-new performance.
• Mounting components are included with every model for easy installation.

• Steel stampings made to exact dimensions and gauge
• Molded rubber made of SBR material to provide proper dampening of vibration

• All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
• Rod Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
• Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
• Twin Technology: Impact Control Valve (ICV), delivers exceptional control under virtually all driving conditions, and patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
• Hardened and Chrome Plated Piston Rod: Long service life.
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
• Unique Rod Guide and Single Lip Seal: Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance.
• Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.