SPORTLINE Kit (Set of 4 Springs) to Fuel Pump Module Assembly

Conductance Technology advantages make battery testing safe, fast and simple
Proven test algorithms - also displays available power in CCA's at the end of each test
High and low voltage capture for improved starter/charger system testing
Tests discharged batteries
Proven reliability and durability With an innovative design made in the USA, this analyzer features endorsed or required technology by virtually every automotive OEM. Building upon the success of the PBT-100, the first battery conductance tester built for the professional technician's toolbox, the PBT200 offers these additional capabilities: shows available power in CCA in addition to condition and voltage, bad cell detection, advanced starter testing - down arrow displays the captures low voltage from cranking the engine for simple starter analysis. Advanced starter testing - using the up and down arrows while the engine is running displays the captured high and low voltage for simple alternator/regulator analysis.

The highly popular Noah car cover provides maximum all-weather protection at a great value. Outdoor elements are no match for these durable, lightweight covers. Made from proprietary materials and technology, these covers are in a class of their own. Noah car covers are uniquely constructed from industry leading Kimberly-Clark fabric. Protection begins at the inner layer, an impact-resistant polyethylene/nylon blend material that is ultra-gentle on your vehicle’s finish. Then, a central layer of micro-porous fabric repels water and dust, yet remains breathable so moisture vapor can escape. The outside layer of the car cover is constructed from a polypropylene/polyethylene spun bond material that is highly durable, heat-resistant and scratch-resistant. UV inhibitors make this cover great for extended outdoor use. Comes in silver-grey color. Backed by a 4-year warranty.

Product Features:

• High quality all-weather protection
• Kimberly-Clark's best outdoor fabric
• High-tech bonded 4-layer composite
• Film barrier technology
• 4-year warranty

BWD modules are manufactured to meet or exceed OE performance.

Our Xtreme-HD line of alternators and starters are designed to keep equipment up and running! The Xtreme-HD line is designed and built to meet the demands of severe applications. Whether you are pulling logs out of the forest or a full trailer across the country, Xtreme-HD starters and alternators are built to withstand the heat and stress to keep your equipment working hard.

Product Features:

• Manufactured to strict requirements, including 100% new replacement of all bearings, brushes and bushings. Ensuring a quality product each and every time.
• Stringently tested through our industry leading T3 testing procedure where individual components, sub assemblies and complete units are tested to meet or exceed OEM specifications.
• Enhanced design including the use of oil-impregnated bushings, synthetic lubricants and high temperature seals for optimum durability.
• One year unlimited mileage unlimited hour warranty

Solenoids, bushings and brushes are replaced so they are 100% new. Cases are cleaned, shot blasted and painted. All units are 100% load tested to OEM specifications on state of the art computerized equipment.

Planetary gear system for fast line speed. Free spooling. 3500 pound rated line pull. 12V motor. 50 feet of cable.

Product Features:

• Planetary Gear System For Fast Line Speed
• Power In And Out
• Free Spooling
• Permanent Magnetic Motor

Dorman’s Auto Trans Oil Cooler is quality-engineered to cool automatic transmission fluid, prolonging its life. The Auto Trans Oil Cooler consequently helps prevent transmission fluid leaks and overheating, protecting the transmission from possible costly damage. Recommended for replacement when replacing the transmission. Dorman also offers an Auto Trans Oil Cooler Hose Assembly, sold separately.

Product Features:

• Coated for high corrosion resistance and increased protection against the elements
• Durable aluminum construction for long-lasting performance
• Direct replacement for a proper fit every time
• Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

Applicable to many European vehicles
Use with any standard slant-style pressure tester
Made in the U.S.A.
Carrying case included This set contains the following adapters: BMW345, FZ22, FZ25, FZ31, FZ41 and the M0349.

Forged from the finest chrome molybdenum alloy steel - the best choice for strength and durability
Radius corner design - to extend the life of fasteners
The design drives the side of the fastener instead of the corner
Provides increased strength, but also avoids rounding of rusted or damaged fasteners
Fully guaranteed No doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 1" drive 3-7/8" standard 6 point socket is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. It also features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener.

All Bosch fuel pumps conform to an "OE or greater" standard for fit, form and function. This means you get a long-lasting, high-performing pump that firs right the first time.

Product Features:

• OE Fit
• OE Form
• OE Function

Accessories, Body & Wipers > Auto Body Parts > Bumpers

ALL 10 Factory front and rear axle shafts and kits come with a 10 Year Warranty!

Product Features:

• Rear Kit; Dana 35 87-90 Non- Clip L/R - 30 Spline 5 Lug Big Spline

ALL 10 Factory front and rear axle shafts and kits come with a 10 Year Warranty!

Product Features:

• Rear Kit; GM 7.5 90-92 Camaro L/R 28 Spline 5 Lug

New Perfection Clutch Sets include a new O.E.M.-style cover assembly that's been computer-tested for clamp load, plate lift, and finger height, a new O.E.M.-style clutch disc with facings built to exceed O.E.M. specifications and a new clutch release bearing that meets or exceeds O.E.M. specifications. Also includes a new pilot bearing/bushing (where used), an alignment tool for the perfect clutch installation (where available) and a hydraulic line disconnect tool (where used).

The most complete Rebuild Kits in the manual transmission industry today. Each kit contains only the highest quality parts that meet or exceed OE specifications.

New Perfection Clutch Sets include a new O.E.M.-style cover assembly that's been computer-tested for clamp load, plate lift, and finger height, a new O.E.M.-style clutch disc with facings built to exceed O.E.M. specifications and a new clutch release bearing that meets or exceeds O.E.M. specifications. Also includes a new pilot bearing/bushing (where used), an alignment tool for the perfect clutch installation (where available) and a hydraulic line disconnect tool (where used).

Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.

Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.

This OEM-quality replacement can be installed in as little as an hour using common hand tools. It makes use of the original holes and does not require the drilling of new holes. Interchangeable with OE wiring harness. Tested to fit your vehicle and function like the OE part. Fully legal and in compliance with all federal regulations.

These days, the DIY or do-it-yourself crowd is all about creating custom work and one-off exhausts are no exception. Whether you're working on a classic car, race car or just your daily driver, a MagnaFlow universal converter should be the standard building block for your custom exhaust. Since these items are universal, some modifications may be involved such as cutting or welding.

Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.

ALL 10 Factory front and rear axle shafts and kits come with a 10 Year Warranty!

Product Features:

• Rear Kit; Dana 35 90-UP C- Clip L/R - 30 Spline 5 Lug Big Spline

ALL 10 Factory front and rear axle shafts and kits come with a 10 Year Warranty!

Product Features:

• Rear Kit; Ford 8.8 79-93 Mustang L/R - 31 Spline 4 Lug Big Spline

Remanufactured in the U.S.A. for optimum performance and fuel economy, Tomco brand carburetors are renowned as the ultimate replacement for your vehicle's original equipment. Completely disassembled and cleaned, every component is thoroughly evaluated. Non-qualifying components are replaced and design flaws corrected based upon our extensive research. Every carburetor is flow tested to simulate actual vehicle conditions and adjusted to the original equipment manufacturer's specifications. Experience and care assures that you will receive the highest quality carburetor which meets or exceeds the performance of your vehicle's original equipment.

ALL 10 Factory front and rear axle shafts and kits come with a 10 Year Warranty!

Product Features:

• Rear Kit; GM 8.5 68-72 Chevelle L/R 28 Spline 5 Lug Dual BC

Airtex fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every Airtex Fuel Pump to deliver greater reliability.

Product Features:

• Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
• Triple barb hose fitting provides superior, long-lasting seal
• Superior return porting for optimum fuel flow
• Enhanced pump to flange harness design provides worry-free electrical performance
• Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
• Gradient density, dual zone filtration designed for better contamination resistance