Gun 1.8mm Siphon Feed Primer with 1 Qt. Aluminum Cup to Accelerator Cable

Features & Benefits:

All-purpose easy-to-clean paint spray gun

Two-piece construction with gun featuring exclusive air valve design

Fully adjustable wide fan pattern control

1 quart capacity drip less cup

  Specifications:

Nozzle Size: 1.8mm

Operation Pressure: 50-60psi=

Net Weight: 3lbs./1.36kg

Avg. Air Consumption: 7-12cfm

Air Inlet Thread NPT: 1/4"

Required Compressor: 3hp

Max. Pattern at 8" Distance: 11"/280mm

As a sealant cutter, cuts around bonded and encapsulated glass
Efficiently cleans and smoothes moldings after glass removal
Teasing throttle and regulator to provide easy speed control
Flexible blade mount can be positioned in 12 different ways (at 30° increments)
Rear exhaust directs air away from work
Safety lever
Blades Included with tool: 2pc.- WINDK-08E - 57mm Bent Blade; 1pc. - WINDK-08F - 90mm Bent Blade; 1pc.- WINDK-08G -35mm Round-Nose Straight Blade; 1pc. - WINDK-08H - 52mm Bent Curved Blade Specifications:
Oscillations Per Minute: 20,000
Stroke Arc: 3°
Overall Length: 8" (203mm)
Net Weight: 3lbs. (1.36kg)
Air Inlet Thread NPT: 1/4"
Air Hose I.D. Size: 3/8" (10mm)
Avg. Air Consumption.: 6cfm
Air Pressure: 90-120psi
Vibration level: 2.2 m/s

Made of S2 steel
  Includes:
5/64" Hex wrench
3/32" Hex wrench
1/8" Hex wrench
5/32" Hex wrench
3/16" Hex wrench
1/4" Hex wrench
5/16" Hex wrench
3/8" Hex wrench
1/2" Hex wrench
Molded tray

Set provides assortment of popular bit sizes for a variety of applications
Extended bits allow for access to hard to reach areas
Extended bits reduce damage that results when chuck comes in contact with work surface
Made in Taiwan

Front cover lens for 8077SE welding helmet
Protective Lens
Protects against welding spatter This is a 5 piece front cover lens for the AST8077SE welding helmets.

Ideal for cleaning and polishing engine heads and detail sanding Kit Includes: 1- 1/4" 90 degree angle die grinder with composite handle (1240), 5 - 2" Surface prep pads with holder, 5 - 3" Surface prep pads with holder, 1 Spanner wrench, 1 1/8" Collet and 10 piece stone assortment. Specs:

Collet Size: 1/4"

Free Speed: 20,000 rpm

Overall Length: 5" (127mm)

Net Weight: 1lbs. (.45kg)

Motor: 1/3hp

Air Inlet Thread NPT: 1/4"

Air Hose I.D. Size: 3/8" (10mm)

Avg. Air Consumption: 3cfm

Air Pressure: 90-120psi

1/2" inlet/outlet
Spring located in the middle drum to ensure the stability of the whole unit
300 psi air hose reel
Automatic rewind
Solid rubber stopper 4-Way directional rollers. 2 position roller bracket assembly. Non-conductive hose. Multi-position mounting arm allows for floor, wall, or ceiling mounting.

Very low pick up point of 2-3/4"
Double plunger
8 pumps to full height
Quick pump
Lifting arm reinforced with internal steel beam Other features include: By-pass system; Overload protection; 1.9 ton on single stroke under normal load; Extra long 2 piece handle for easier pumping and reach under vehicles; Universal 45 degree guarantees pumping at any position under load; Steel casters; Reinforced side frames; Foam covered handle. Meets ANSI standard for performance and safety specifications. Specifications:  
Min. saddle height: 2-3/4" (70mm)
Max. saddle height: 19-5/8" (495mm)
Chassis length: 26-3/4" (680mm)
Height with handle: 56" (1420mm)
Frame height: 5-1/2" (142mm)
Saddle diameter: 4-3/4" (120mm)
Net weight: 91 lbs. (41kg)

Contains: 1 - 3" Roloc Holder
4 - 3" Roloc Surface Prep Pads
3" Surface Prep Pads and Kits

Ideal for restoring aluminum and magnesium rims, engine parts, motorcycle parts and plastics (1800 RPM's)
Easily removes clear coats from weathered wheels
Creates CUSTOM looks on parts by giving them a polished or a flat finish
Restores damaged polycarbonate headlamps (Must use tool at low rpm - 1800 max for plastic)
Quickly restores weathered headlamps without removing from car Reduces cost of replacements. All Buffs have a hex shaped shaft with a Quick Coupling mechanism. No tools needed to switch the buffs. Kit includes:     
Aluminum storage case    
Variable speed Quick Coupler Air Buffer 0-3000 RPM (AST3059A) 
3" Scuff Mushroom Shaped Buff (AST3059-01) - to remove clears and to smooth out rough metals 
4" Scuff Mushroom Shaped Buff (AST3059-02) 
3" 100 percent Cotton Mushroom Shaped Buff (AST3059-03) - for buffing in to tight quarters 
4" 100 percent Cotton Mushroom Shaped Buff (AST3059-04) 
3" 100 percent Cotton Tapered Buff (AST3059-05) - great for recessed areas 
2" 100 percent Cotton Drum Buff (AST3059-06) - great for rim edges and flat surfaces 
Brown Rouge (AST3059-07) - great for aluminum, pewter, pot metals, brass and other mild metals 
White Rouge (AST3059-08) - brings up the shine and all metals 
Blue Rouge (AST3059-09) - great for headlamp covers and other plastics. (Do not use on high RPM to prevent Heat buildup. 1800 RPM max speed)

Heat treated
Chrome plated
Chrome vanadium steel shafts with magnetic tips
Four picks for removing, installing, aligning, probing and piercingThis set features heat treated, chrome plated, chrome vanadium steel shafts with magnetic tips.  Four picks for removing, installing, aligning, probing and piercing.  Set includes: 1 - Offset 45° hook, 1 - Straight pick, 1 - 90° hook, 1 - Full hook.  Net Weight: 1/3lbs. (.15kg)

80 grit sanding belt

3/8" x 13"

10 pack

8 different size tubes to ensure you have the right size tube for the job
Tubes shrink to fit over cable splices and can be used for light harnessing, covering, marking, and bundling of wires
Usage for auto, marine, plane, home, industrial, computer, etc.
Easy to install
Saves time and money The Heat Shrinking Tubes are made of polyolefin which provides protection and insulation of automotive, electrical, and mechanical wires, etc. from heat, moisture, corrosion and other elements.  2: 1 Shrink Ratio - Tubes shrink to half their original size by simply applying heat. Set includes following sizes in multi-colors (Black, Blue, Green, Red, Yellow): 40 pieces 3/32" Heat Shrinking Tubes; 55 pieces 1/8" Heat Shrinking Tubes; 55 pieces 3/16" Heat Shrinking Tubes; 55 pieces 1/4" Heat Shrinking Tubes; 10 pieces 1/2" Heat Shrinking Tubes; 10 pieces 3/8" Heat Shrinking Tubes; 5 pieces 3/4" Heat Shrinking Tubes and 5 pieces 5/8" Heat Shrinking Tubes.

Cuts up to 6" (150mm), welds up to 3/8" (9mm) steel
Torch handle has two stainless steel needles valves for fast accurate flame adjustment
Made of tough extruded brass with extra wall thickness that adds strength and durability to the torch handle
No screws or soldering parts add to ease of torch handle maintenance
Cutting attachment features a double o-ring seal providing a quick, tight, and leak free connection Forged brass head and body and stainless steel tube construction add long life to the cutting attachment. Cutting attachment features a press lever for easy cutting. Each welding tip has an angled tip that is compatible with the spiral mixer.
  Kit includes:
Torch handle
Cutting attachment
Check valve
Oxygen regulator
Acetylene regulator
Nozzle tips (VM-W 0, 2, 4 • VM-C 0-3-101)
Twin hose
Spark lighter
Goggles
Tip cleaners
Molded case

Quickly and easily removes O-rings, grease and oil seals
Special angle on the tool head provides better access than the traditional seal pullers
3 different lengths and tips fit nearly all seal applications
Simply insert the tips, press and pull
Includes 4.6", 6", and 6.5" pullers

Comes with 8 adjustable bars to fit almost any panel securely
Allows for fast and easy moving of the part from the prep station to the spray booth
Allows for single handed rotation of panels 350 degrees in 16 degree increments
Includes bottom parts tray for storage of bars and other tools
Weight Capacity: 200 lbs.
Weighs 57 lbs. This universal Astro Super Stand can handle any panel, fender, door, hood, or bumper to make repairs and refinishing easy.

Includes bars for two (2) paper rolls and four (4) tape rolls
Large adjustable washers maintain paper alignment
Wing nuts for easier paper loading
Sharp, anodized blade for smooth cutting
Large storage tray on bottom for tools Sandpaper tray on side and bar for holding spray gun. Weight: 33 lbs.

  
Wobble drive provides added flexibility to reach additional hard to reach areas 
Compact and lightweight 
Ideal tool for confined working areas such as under dashboard work 
Ergonomically designed black composite body 
Overall length 5-1/2" (140mm)
  

Direct replacement.

Direct replacement part.

Direct replacement.

Application-specific direct-replacement part.

Direct replacement part.

Air, Fuel, Emission & Exhaust > Carburetors & Intake Manifolds > Accelerator Cables

Transmission & Drivetrain > Manual Transmissions > Clutch Cables

Air, Fuel, Emission & Exhaust > Carburetors & Intake Manifolds > Accelerator Cables

Transmission & Drivetrain > Manual Transmissions > Clutch Cables

Application-Specific Direct-Replacement Cable Assembly

Direct replacement.