-
Your Store:
-
[
Oxygen Sensor Direct Fit to Full WOT Switch Bracket
Buy Denso brand, Oxygen Sensor Direct Fit
Denso brand, Oxygen Sensor Direct Fit
Designed to meet the increasing demands of today's engines. Each of our oxygen sensors is constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each Denso sensor.
Brand: Denso
Buy Denso brand, Ignition Wire Set
Denso brand, Ignition Wire Set
Original Equipment Replacement Wires / Complete Ignition Wire Set - 7mm
Product Features:
Product Features:
- Original Equipment Replacement Wires / Complete Ignition Wire Set - 7mm
- DENSO First Time Fit ignition wire sets are identical in form, fit, color, and performance to the factory-installed wire sets
- Every part the wire set's construction meets or exceeds OE/OES specifications
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to "click" in place for a secure fit, allowing the installer to "feel and hear" that a solid connection has been made, even when the connection is in a difficult-to-see location
- Through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Brand: Denso
Buy Denso brand, Coil On Plug Boot (2 Pk)
Denso brand, Coil On Plug Boot (2 Pk)
Original Equipment Replacement Wires / Complete COP Boot Set - 2
Product Features:
Product Features:
- Original Equipment Replacement Wires / Complete COP Boot Set - 2
- DENSO First Time Fit ignition wire sets are identical in form, fit, color, and performance to the factory-installed wire sets
- Every part the wire set's construction meets or exceeds OE/OES specifications
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to "click" in place for a secure fit, allowing the installer to "feel and hear" that a solid connection has been made, even when the connection is in a difficult-to-see location
- Through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Brand: Denso
Buy Denso brand, Ignition Wire Set
Denso brand, Ignition Wire Set
Original Equipment Replacement Wires / Complete Ignition Wire Set - 7mm
Product Features:
Product Features:
- Original Equipment Replacement Wires / Complete Ignition Wire Set - 7mm
- DENSO First Time Fit ignition wire sets are identical in form, fit, color, and performance to the factory-installed wire sets
- Every part the wire set's construction meets or exceeds OE/OES specifications
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to "click" in place for a secure fit, allowing the installer to "feel and hear" that a solid connection has been made, even when the connection is in a difficult-to-see location
- Through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Brand: Denso
Buy Denso brand, Ignition Wire Set
Denso brand, Ignition Wire Set
Original Equipment Replacement Wires / Complete Ignition Wire Set - 8mm
Product Features:
Product Features:
- Original Equipment Replacement Wires / Complete Ignition Wire Set - 8mm
- DENSO First Time Fit ignition wire sets are identical in form, fit, color, and performance to the factory-installed wire sets
- Every part the wire set's construction meets or exceeds OE/OES specifications
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to "click" in place for a secure fit, allowing the installer to "feel and hear" that a solid connection has been made, even when the connection is in a difficult-to-see location
- Through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Brand: Denso
Buy Denso brand, Ignition Wire Set
Denso brand, Ignition Wire Set
Original Equipment Replacement Wires / Complete Ignition Wire Set - 7mm
Product Features:
Product Features:
- Original Equipment Replacement Wires / Complete Ignition Wire Set - 7mm
- DENSO First Time Fit ignition wire sets are identical in form, fit, color, and performance to the factory-installed wire sets
- Every part the wire set's construction meets or exceeds OE/OES specifications
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to "click" in place for a secure fit, allowing the installer to "feel and hear" that a solid connection has been made, even when the connection is in a difficult-to-see location
- Through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Brand: Denso
Buy Denso brand, Ignition Wire Set
Denso brand, Ignition Wire Set
Original Equipment Replacement Wires / Complete Ignition Wire Set - 8mm
Product Features:
Product Features:
- Original Equipment Replacement Wires / Complete Ignition Wire Set - 8mm
- DENSO First Time Fit ignition wire sets are identical in form, fit, color, and performance to the factory-installed wire sets
- Every part the wire set's construction meets or exceeds OE/OES specifications
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to "click" in place for a secure fit, allowing the installer to "feel and hear" that a solid connection has been made, even when the connection is in a difficult-to-see location
- Through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Brand: Denso
Buy Denso brand, Ignition Wire Set
Denso brand, Ignition Wire Set
Original Equipment Replacement Wires / Complete Ignition Wire Set - 5mm
Product Features:
Product Features:
- Original Equipment Replacement Wires / Complete Ignition Wire Set - 5mm
- DENSO First Time Fit ignition wire sets are identical in form, fit, color, and performance to the factory-installed wire sets
- Every part the wire set's construction meets or exceeds OE/OES specifications
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to "click" in place for a secure fit, allowing the installer to "feel and hear" that a solid connection has been made, even when the connection is in a difficult-to-see location
- Through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Brand: Denso
Buy Denso brand, Ignition Wire Set
Denso brand, Ignition Wire Set
Original Equipment Replacement Wires / Complete Ignition Wire Set - 7mm
Product Features:
Product Features:
- Original Equipment Replacement Wires / Complete Ignition Wire Set - 7mm
- DENSO First Time Fit ignition wire sets are identical in form, fit, color, and performance to the factory-installed wire sets
- Every part the wire set's construction meets or exceeds OE/OES specifications
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to "click" in place for a secure fit, allowing the installer to "feel and hear" that a solid connection has been made, even when the connection is in a difficult-to-see location
- Through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Brand: Denso
Buy Denso brand, W20FP-U Standard Spark Plug
Denso brand, W20FP-U Standard Spark Plug
Standard Plug with Patented U-Groove Design
Product Features:
Product Features:
- Standard Plug with Patented U-Groove Design
- 100% pre-fired to assure high quality
- Copper-glass seal bonds the center electrode and insulator together for a gas-tight seal; maintains proper heat and excludes hot combustion gases
- Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress
Brand: Denso
Buy Dent Fix brand, SAND BOX Protective Sand Paper Dispenser
Dent Fix brand, SAND BOX Protective Sand Paper Dispenser
Protects adhesive sand paper from dust and moisture
Easy to dispense exact quantity of sand paper needed
Portable or can be affixed to a central location
Eliminates unraveling of sand paper rolls
Easy inventory control - prevent inventory shrinkage The Sand Box protects the high priced consumable adhesive sand paper from spoilage by moisture and dust common in body shops. Locate the sand paper dispenser in central location for easy retrieval or assign one to each technician for ultimate convenience and inventory shrinkage control. Saw blade tear strip makes easy work of precisely tearing of the exact amount of paper needed.
Brand: Dent Fix
Buy Dent Fix brand, Punch and Flange Plier
Dent Fix brand, Punch and Flange Plier
This pliers combines a 5/16th hole punch with a flanging tool
The swiveling head allows you to change from one function to the other with the flip of a wrist
Manufactured in Denmark, this pliers is built to last
Brand: Dent Fix
Buy Dent Fix brand, Spot Annihilator Deluxe Spot Weld Drill
Dent Fix brand, Spot Annihilator Deluxe Spot Weld Drill
1000 RPM for higher strength steel such as Boron Steel
Depth adjustable drilling point - no holes to fill
Applies proper cutting pressure pneumatically-less fatigue
Patented gentle approach, 2 stage trigger - won't break bits
5 year warranty The Spitznagel Spot Annihilator is depth adjustable spot weld drill. The depth adjustment ensures that only the top panel is drilled through, leaving the underlying panel clean and ready for the new panel. The drill pneumatically applies the cutting pressure ensuring consistency in pressure application and less technician fatigue. This drill has lower RPM's to maximize the life of drills bits and for use with today's higher strength and Ultra High Strength, aka Boron Steel. Kit includes 1/ 8.0mm Tungsten Carbide, Boron cutting bit, 2/ 8.0mm Titanium coated bits, 1/ 10.0mm Titanium coated bit, inline oiler, oil bottle and deluxe case.
Depth adjustable drilling point - no holes to fill
Applies proper cutting pressure pneumatically-less fatigue
Patented gentle approach, 2 stage trigger - won't break bits
5 year warranty The Spitznagel Spot Annihilator is depth adjustable spot weld drill. The depth adjustment ensures that only the top panel is drilled through, leaving the underlying panel clean and ready for the new panel. The drill pneumatically applies the cutting pressure ensuring consistency in pressure application and less technician fatigue. This drill has lower RPM's to maximize the life of drills bits and for use with today's higher strength and Ultra High Strength, aka Boron Steel. Kit includes 1/ 8.0mm Tungsten Carbide, Boron cutting bit, 2/ 8.0mm Titanium coated bits, 1/ 10.0mm Titanium coated bit, inline oiler, oil bottle and deluxe case.
Brand: Dent Fix
Buy Dent Fix brand, Plastic Lever Scraper - Windshield Tool
Dent Fix brand, Plastic Lever Scraper - Windshield Tool
Designed specifically for windshields this tool has found its way into many other uses
Will not scratch soft surfaces
Work on the dash, door panel, remove vents and scrape painted surfaces
Will not scratch soft surfaces
Work on the dash, door panel, remove vents and scrape painted surfaces
Brand: Dent Fix
Buy Design Engineering brand, Cool Tube Extreme Blue 3/4" dia. X 3'
Design Engineering brand, Cool Tube Extreme Blue 3/4" dia. X 3'
Able to reflect continuous heat up to 750°F while offering a quality profession look, Cool Tube Extreme is flexible enough to conform to tight bends and provide superior protection against extreme under hood temperatures, weather conditions and abrasions.
Made from a special composite material with a spiral wire reinforced, Cool Tube Extreme is ultra-light that can be slit lengthwise to apply to cables, wires and hoses.
Product Features:
Made from a special composite material with a spiral wire reinforced, Cool Tube Extreme is ultra-light that can be slit lengthwise to apply to cables, wires and hoses.
Product Features:
- No need to remove wires, cables or hoses, Can be slit lengthwise for easy install
- Reflects 750° F direct continuous heat
- Easily trim to length
- Tough, durable with an easy to clean finish
- Available in 4 vivid colors
- 5 available diameters
Brand: Design Engineering
Buy Design Engineering brand, 10 lb. Tank Mounting Bracket - Tall (Each)
Design Engineering brand, 10 lb. Tank Mounting Bracket - Tall (Each)
CryO2 bottles and accessories are precision made from the finest materials then meticulously tested to perform at the highest level possible.
Product Features:
Product Features:
- Stainless Steel
- Quick-Clamp Brackets
- Clamp span- 6 7/8"-7 3/8"
- Fits our 10 Lb and 15 Lb Tank
Brand: Design Engineering
Buy Design Engineering brand, Floor & Tunnel Shield II - 21" X 48" (7 Sq. Ft.)
Design Engineering brand, Floor & Tunnel Shield II - 21" X 48" (7 Sq. Ft.)
Use as a barrier to reflect and insulate from any heat source.
Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well.
Constructed with an embossed 10 mil aluminum face bonded to 1/8" composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F of direct continuous heat. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16" thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas.
With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound.
Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations - anywhere to reflect damaging heat.
Product Features:
Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well.
Constructed with an embossed 10 mil aluminum face bonded to 1/8" composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F of direct continuous heat. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16" thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas.
With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound.
Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations - anywhere to reflect damaging heat.
Product Features:
- Ideal for firewalls, under-vehicle, floor pans, oil tank box areas, transmission tunnels, wrapping fuel cells, under hoods & more
- Blocks radiant heat from entering driver compartment
- Withstands direct high heat temperatures up to 1750°
- Serves as a barrier to unwanted road, tire, & engine noise
- Constructed from 10 mil aluminum bonded to finely woven layer of high temperature resistant glass fiber
- Easy to form to shapes and contours
- Aggressive self-adhesive backing holds past 450°F
- Adheres to almost any surface or material including to fiberglass
- Minimum clearance required, only 3/16" thick
- Just trim, peel & stick
Brand: Design Engineering
Buy Design Engineering brand, DEI Flames T-Shirt - Small
Design Engineering brand, DEI Flames T-Shirt - Small
DEI T-Shirts are available in sizes ranging from small to xx-large. Silk screened with the DEI "Flames" logo, these high quality T-shirts are made of 100% cotton, pre-shrunk and bound to draw attention.
Brand: Design Engineering
Buy Design Engineering brand, Automotive Exhaust & Header Wrap Kit - White
Design Engineering brand, Automotive Exhaust & Header Wrap Kit - White
An all-in-one kit for wrapping a set of headers or motorcycle pipes. Automotive kit includes two 2" x 50ft rolls of exhaust wrap one can of HT Silicone Coating & Locking Ties.
The header wrap kit is enough for any set of V8 headers. The Header Wrap Kit will wrap from the top of the header where it bolts to the heads all the way down to the collector. Exhaust Wrap Kits save you time and money
Product Features:
The header wrap kit is enough for any set of V8 headers. The Header Wrap Kit will wrap from the top of the header where it bolts to the heads all the way down to the collector. Exhaust Wrap Kits save you time and money
Product Features:
- 2 rolls of 2 in. x 50 ft. Exhaust Wrap
- 1 can of HT Silicone Coating Spray
- 8 - 8 in. Stainless Steel Locking Ties
- 4 - 14 in. Stainless Steel Locking Ties
Brand: Design Engineering
Buy Design Engineering brand, Cool Tube Extreme Blue 1/2" dia. X 9'
Design Engineering brand, Cool Tube Extreme Blue 1/2" dia. X 9'
Able to reflect continuous heat up to 750°F while offering a quality profession look, Cool Tube Extreme is flexible enough to conform to tight bends and provide superior protection against extreme under hood temperatures, weather conditions and abrasions.
Made from a special composite material with a spiral wire reinforced, Cool Tube Extreme is ultra-light that can be slit lengthwise to apply to cables, wires and hoses.
Product Features:
Made from a special composite material with a spiral wire reinforced, Cool Tube Extreme is ultra-light that can be slit lengthwise to apply to cables, wires and hoses.
Product Features:
- No need to remove wires, cables or hoses, Can be slit lengthwise for easy install
- Reflects 750° F direct continuous heat
- Easily trim to length
- Tough, durable with an easy to clean finish
- Available in 4 vivid colors
- 5 available diameters
Brand: Design Engineering
Buy Design Engineering brand, DEI Flames T-Shirt - XX-Large
Design Engineering brand, DEI Flames T-Shirt - XX-Large
DEI T-Shirts are available in sizes ranging from small to xx-large. Silk screened with the DEI "Flames" logo, these high quality T-shirts are made of 100% cotton, pre-shrunk and bound to draw attention.
Brand: Design Engineering
Buy Design Engineering brand, Quick-Fix Self-Adhering Tape - Black
Design Engineering brand, Quick-Fix Self-Adhering Tape - Black
High performance Quick Fix Tape bonds to itself and is self-curing, forming a waterproof permanent seal. It's ideal for emergency hose repair, non-slip grip surface for tools, electrical splices and connections, serves as a temporary leak sealer, and does not leave a sticky residue after removal. Just a few of it's many uses.
Extruded from a special high performance grade silicone compound and engineered at 700psi tensile strength, Quick Fix Tape has insulating capabilities up to 8,000 volts and stretches to three times its length for a simple stretch-and-wrap application. The triangular profile of the tape (the center is thicker than the edges) provides a smooth edge when over lapping tape.
Product Features:
Extruded from a special high performance grade silicone compound and engineered at 700psi tensile strength, Quick Fix Tape has insulating capabilities up to 8,000 volts and stretches to three times its length for a simple stretch-and-wrap application. The triangular profile of the tape (the center is thicker than the edges) provides a smooth edge when over lapping tape.
Product Features:
- Available in 1 in. wide x 12 ft. rolls
- Withstands temperatures from -60 degrees F (-54 C) to 500 degrees F (260 C)
- Seal ends of hoses, bundle & wrap wires, weatherproof connections & more
- Can be applied to wet surfaces
- Corrosion & moisture resistant
- Permanent air / liquid tight seal
- Resists solvents, oils, fuel, acids & chemical spills
Brand: Design Engineering
Buy Design Engineering brand, Speed Tape - Checker Board
Design Engineering brand, Speed Tape - Checker Board
DEI's Speed Tape has multiple uses including race applications, temporary damage repairs and taping body seams to name a few. Speed Tape tears straight and easy every time and is available in eight colors as well as the popular checker-board.
Brand: Design Engineering
Buy Design Engineering brand, Boom Mat Damping Material - 12-1/2" x 24" (20 Pack - 41.7 sq.ft.)
Design Engineering brand, Boom Mat Damping Material - 12-1/2" x 24" (20 Pack - 41.7 sq.ft.)
Boom Mat is a high quality simple and effective solution in eliminating the low frequency noise problems found in structure-borne vibrations caused by typical automotive noise sources. Simply trim to desired size, peel backing and apply to a clean surface.
Boom Mat is constructed of a viscoelastic polymer layer protected by a durable aluminum wear surface and it’s strong adhesive backing is unaffected by extreme hot and cold temperatures and can be applied to horizontal, vertical and inverted areas on metal, plastic, fiberglass and most other automotive surfaces. Available in a variety of sizes for a cost effective installation.
Use as a first layer for areas with contours and bends for vibration damping needs
Product Features:
Boom Mat is constructed of a viscoelastic polymer layer protected by a durable aluminum wear surface and it’s strong adhesive backing is unaffected by extreme hot and cold temperatures and can be applied to horizontal, vertical and inverted areas on metal, plastic, fiberglass and most other automotive surfaces. Available in a variety of sizes for a cost effective installation.
Use as a first layer for areas with contours and bends for vibration damping needs
Product Features:
- High performance adhesive maintains adhesion throughout temperature extremes
- Eliminates low frequency noise problems
- Easily trimmed to size with Boom Mat Blade Lock Knife
- Non-hazardous material
- Flexible - can be applied to irregular surfaces
- User friendly peal and stick installation
- Multiple uses including automotive, commercial and industrial applications
- Durable weatherproof construction is also corrosion resistant
- Flamability Rated
- The industry standard in vibrational damping technology
Brand: Design Engineering
Buy Design Engineering brand, Protect-A-Boot 6" Spark Plug Boot Protectors - Silver (2-Pack)
Design Engineering brand, Protect-A-Boot 6" Spark Plug Boot Protectors - Silver (2-Pack)
Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.
Product Features:
Product Features:
- Withstands 1200°F direct continuous heat
- Helps prevent burn-through, hardening and cracking of boots
- Universal-fits most straight or angled boots
- Installs in seconds
- Double-wall construction for added durability
- Non-flammable & protects against chemicals & resists water
Brand: Design Engineering
Buy Design Engineering brand, Reflect-A-Cool - Heat Reflective Tape 36" x 48"
Design Engineering brand, Reflect-A-Cool - Heat Reflective Tape 36" x 48"
Reflect-A-Cool, constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a racecar where typical mechanical fasteners cannot be used and has many industrial uses.
Reflect-A-Cool can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It’s that easy.
Product Features:
Reflect-A-Cool can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It’s that easy.
Product Features:
- Protect wires, cables, hoses, pipes & tubing from radiant heat sources
- Radiant heat protection up to 2000°F
- Self-adhesive backing with release liner for easy installation
- Moisture & solvent resistant
- Virtually NO clearance needed
Brand: Design Engineering
Buy Design Engineering brand, CryO2 Air Intake - 3" O.D.
Design Engineering brand, CryO2 Air Intake - 3" O.D.
The CryO2 patented* Air Intake consists of an aerodynamically designed bulb with a cryogenic chamber which is mounted in a short segment of air tube. Air is cooled as it passes over the bulb, resulting in a cooler, denser, more powerful intake air charge. Testing showed up to a 50°F reduction in intake air temperature.
Product Features:
Product Features:
- Designed for turbocharged, supercharged, and N/A applications
- Multiple units increase cooling results
- Easy installation
- Large 4 ½" O.D. for Diesel and hi-power applications
- Complete with silicone coupler, hose clamps, vent cap, and braided line
- Available in 2-1/2", 3", and 4-1/2" O.D.
- Available in bulb & legs only for custom plumbing
Brand: Design Engineering
Buy Design Engineering brand, Speed Tape - Red
Design Engineering brand, Speed Tape - Red
DEI's Speed Tape has multiple uses including race applications, temporary damage repairs and taping body seams to name a few. Speed Tape tears straight and easy every time and is available in eight colors as well as the popular checker-board.
Brand: Design Engineering
Buy Design Engineering brand, Speaker Baffles - Pair - 4" Round Slim
Design Engineering brand, Speaker Baffles - Pair - 4" Round Slim
Boom Mat speaker baffles maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to prevent moisture intrusion.
Closed cell polyethylene enhances frequency response for improved sound clarity Easy conformability in tight spaces for a professional installation Isolates frequency responses and prevents sound from migrating to unfavorable areas in the vehicle such as door panels.
Product Features:
Closed cell polyethylene enhances frequency response for improved sound clarity Easy conformability in tight spaces for a professional installation Isolates frequency responses and prevents sound from migrating to unfavorable areas in the vehicle such as door panels.
Product Features:
- Closed-cell polyethylene enhances frequency response for improved sound clarity
- Easy conformability in tight spaces for a professional installation
- Thin material design offers less bulk for a clean and tight installation for professional finished appearance
- Isolates frequency responses and prevents sound from migrating to unfavorable areas in the vehicle such as door panels
- Serves as a protective barrier for speaker cone and voice coil against dirt and dust
- Damping properties help reduce distortion for enhanced acoustical response
- Closed-cell material forms a cushioned seal between speaker and mounting surface to isolate speakers from vehicle
- Acts as a protective guard for exposed speakers (example: speaker components visible in trunk area)
- Extends speaker lifespan and protects owner’s speaker investment
- All sold in pairs
Brand: Design Engineering
Buy Design Engineering brand, Full WOT Switch Bracket
Design Engineering brand, Full WOT Switch Bracket
Product Features:
- Universal mounting bracket
- Multiple bolt patterns allow for multiple mounting angles for different needs
- Bracket can be bent and will retain shape
Brand: Design Engineering
