10 ALUM PIPE WRENCH to 1.5 cfm Portable Vacuum and Electronic Charging Station

30 degree angle head
Made with a Chrome finish
Thin pattern for the use on jam nuts and confined areas
Made in the USA Angle wrenches are traditionally designed with trucks and hydraulics in mind. They are also very useful working on new cars and pick-up trucks. This is an angle open end service wrench. It's made tough and durable for a long tool life. This set includes the following sizes: 3/8" x 3/8", 7/16" x 7/16", 1/2" x 1/2", 9/16" x 9/16", 5/8" x 5/8", 11/16" x 11/16", 3/4" x 3/4". 

Size: 4-3/4" x 2-3/8" x 1-1/8"

Provides easy accessibility to narrow pockets Thinness and length provide easy accessibility to narrow pockets. Large, flat face is frequently used in shrinking and dinging flat panels.  The flat sides furnish a convenient anvil for repairing flanges.  

Size: 5-3/4" x 2-3/8" x 2-3/16"
Used for working behind reinforcements
Long and thin lip for better access Long slender, general purpose dolly.  Widely favored by many body repair men for all-around use.  The long, thin lip is very useful in working behind reinforcements.

For use with all body hammers except 165 and 155

Long-reach, thin point for low spot on low-crown panels
Reaches over inner obstructions
One high-crown face
Face, 1-1/4" round point, 1/32" radius
Length of pointed end, 5-1/2"

MRT164FGUtility Pick Hammer

Blunt point, short reach For low spots in high crown panels and other work with small clearance Face, 1-9/16in. round point, 5/32in. radius, length of pointed end, 2in.

4in. overall 

MRTBC22 Crowfoot Wrench - 3/8in. Drive 11/16in.

Length: 31"
Use twisting or prying action
Access dents inside doors or between inner/outer fenders with ease
Made in the USAThis curved pick makes it easier for the hard to reach surfaces.  Curved to get to and work out the dents. Made with the strength and durability needed!

1" handle diameter, 19" length
Used for tight, crimped areas
Wide spoon spreads the blow over a wide area without damage The answer to repair problems on high fins. A dolly, a spoon, a pry.  It's long handle and special contours are for working up inside cramped fins. Wide spoon transmits-hammer blows over wide area without damaging the finish.

Face size: 2-1/2" x 1" x 3"
Long handle that permits many uses in places otherwise inaccessible
Can be driven between reinforcements and outer panel, then used to pry outward as the metal is dinged
Excellent forming and caulking tool for the deep pockets of doors, quarter-panels, rear fenders and lower trunk panels The most popular body repair specialty tool. Combines all the contours and weight of a dolly with the reach and maneuverability of a spoon. Use for forming, prying and caulking in those hard to reach places.

Face 2" x 7"
Length 10-1/2" overall
Used to pry up dents behind curved reinforcements
Long curved spoon Long, thin, curved blade is handy for prying up dents behind curved reinforcements in header panels, hinge anchors in doors, body pillars and reinforcements in hoods and radiator shells. Made with quality and the durability to last! 

MRTBC30 Crowfoot Wrench 3/8in. x 15/16in. - 12 point - Chrome

Marvel Mystery Oil helps extend engine life by breaking down and removing harmful deposits of sludge and carbon in your engine oil. When regularly added to your fuel, it helps keep spark plugs and fuel injectors free of carbon deposits, resulting in increased fuel economy. Marvel Mystery Oil fortifies motor oil for increased resistance to high temperatures and easier cold-weather starting.

 
Compact, fits easily into pocket or tool kit
Quick starting self-igniting piezo electric ignition eliminates the need for lighters and matches
Wind resistant flame that resists moisture and is perfect for outdoor use, such as camping and biking
Adjustable flame height for temperature up to 2500 degrees F/1300 degrees C blue flame
Run time: 20 minutes at maximum setting Safety lock and attached safety cap prevent unintentional ignition. Meets Consumer Products Safety Commission Requirements. Great for glass repair, shrink tubing, solder and desolder, terminates specialty connectors, or to light cigarettes and cigars.

Built in fuel filter for consistent fuel ignition
Adjustable temperatures up to 1004 degrees F
Built-in window indicates fuel level
Dual function soldering iron and heat tool
Sturdy metal tank that holds enough gas for 4.5 hours of operation at #3 setting UL and GS/TUV listed for user safety. Includes solder tip, heat tip, shrink attachment and protective cap. Use to pinpoint heat, shrink heat shrink tubing, solder and desolder, strip insulation, terminate specialty connectors, and more.

Compact, lightweight, easy to use design
Variable temperature 130 degrees F to 1000 degrees F
Variable airflow 4 to 16 cfm
Special electronic closed loop temperature when varying airflow or using specialty attachments
Base provides built-in stand for hands free use Kit includes: Proheat Variar Heat Gun, attachments 35016, 35017, 35292, 35293, 35294 and 35351 storage carrying case. Use to heat temperature sensitive materials including specialty connectors, solder performs, shrink tubing and more.

Crimp, Solder and Seal
Easy to use
14 different size butt terminals, 90 pieces total
Prevents wire corrosion
Perfect use with UT-100SI heat tool Multiseal Polyolefin dual wall heat-shrinkable adhesive lined splicing and terminating devices provide tough, environmentally sealed wire connections. Multiseal products provide a sealed electrical system and ensure the original integrity of wire connections and wiring harnesses. These terminals, splices and connectors seal, insulate and protect electrical connections from mechanical abuse, wire pullout, abrasion and current leakage. They resist water, condensation, salt, corrosion and other contaminants, all of which cause problems for conventional unsealed products.

Gas adjustment wheel provides adjustable long blue torch flame with temperature up to 2,500 degrees F

Incorporates "trigger" switch with "pull down" lock to meet Consumer Products Safety Commission (CPSC) child safety requirements

Incorporates a "hands free" slide lock for continuous use and instant off operation

Unique shutter lever extinguishes ignition flame before using soldering or heat tip prevent overheating Ergonomic handle design ensures a non-slip grip. Removable base for table top or hand held use. Unit is shipped without fuel. Use Master UltrataneR Butane for best performance. Use to heat parts, ignite materials, melt plastic, pinpoint torch, shrink tubing, solder and desolder, terminate specialty connectors and more. Includes soldering iron and heat tip for soldering up to 752oF/400oC and heating up to 932oF/500oC.Kit includes trigger torch, removable stand, 5" wire cutter, 5" needle nose pliers, solder tip, heat tip, shrink attachment, polyfoam cutter, hot knife tip, roll 60/40 solder, and stand with sponge packed in a durable plastic case.

LCD with digital display of temperature and airflow settings

Temperature and Air flow Lock-In feature provides added management control - perfect for applications requiring consistent application of heat

Adjustable temperature and adjustable air-flow

Compact, lightweight, easy-to-use

Assembled in the USA. 12 month warranty The ProHeat LCD Dial-In provides powerful, accurate, controllable heat and air-flow to get the job done right. Electronic temperature control system maintains constant temperature when varying airflow or using attachments. Value added features include lockable temperature and air-flow controls, power interrupt safety reset, temperatures shown in degrees Fahrenheit or Celsius, and stable base for optional hands free use.

Translucent, adhesive-lined polyolefin tubing allows visual inspection
Prevents wire corrosion, and provides a waterproof seal
Conforms to automotive manufacturers' specifications for wiring repairs; necessary for maintaining electrical warranties
Color-coded tubing with wire gauge imprint; provides easy identification of the correct part for the job
Crimp and seal Kit includes: wire harness connector kit, kit type crimp and seal, terminal type butt splice. 75 Proseal butt connectors with UT-100Si and crimper.

Triple-refined formula reduces clogging
Contains no CFC's
Special vapor pressure promotes ignition
DOT markings permit ground transportation without hazardous material charges
Recommended fuel for all Master Appliance butane-powered products

Six preset and customizable program settings
Liquid Crystal Display (LCD) of temperature and air-flow settings
Programmable heat and air-flow removes the guess work
Temperature and Air flow Lock-In feature provides added management control - prefect for applications requiring consistent application of heat
Assembled in USA. 12 month warranty The ProHeat LCD Programmable Heat Gun provides powerful, accurate, controllable heat and air-flow to get the job done right. Electronic temperature control system maintains constant temperature when varying airflow or using attachments. Value added features include lockable temperature and air-flow controls, power interrupt safety reset, temperatures shown in degrees Fahrenheit or Celsius, and stable base for optional hands free use. 

3" Motorcycle Disc Brake Lock

Product Features:

• High security for street applications
• Chrome lock with a reminder cord
• Helps prevent roll-away theft

Stylish, solid-body lock with scratch-resistant vinyl coating

Product Features:

• Hardened-steel shackle
• 4-pin tumbler for added security

Combination lock for commercial and utility use

Product Features:

• 4-digit dialing for thousands of possible combinations
• Hardened-steel shackle for added security

Stylish, solid-brass body

Product Features:

• 4-pin tumbler for added security
• Hardened-steel shackle

Ford (FOTCC) Remover and Installer

Used for servicing Ford systems produced after 1980Orifice tube remover and installer for Ford A/C systems after 1980. 

Frequent oil changes will reduce vacuum pump failure and extend the pump life
Thermally stable
Laboratory tested resists breaking down
High viscosity Mastercool pump oil is engineered to maintain maximum viscosity to keep the pump operating at peak efficiency in any climate. Moisture, heat and other contaminants can quickly deteriorate the purity of the oil causing inefficiency during deep vacuum conditions.

Safely removes the A/C clutch plate from Mitsubishi/Sanden A/C compressors
No risk of damage to compressor or clutch plate Mitsubishi/Sanden A/C clutch plate remover

1.5cfm 2 stage deep micron, rotary vane vacuum pump

240 lb. capacity scale with long lasting 9V battery (40 hours)

Extruded aluminum manifold set with 2-1/2" gauges, hoses and manual couplers

A rugged, lightweight steel cart with wheels and convenient storage pocket for scale and hoses allows this portable charging station to be taken almost anywhere

Complete vacuum and charging station Complete vacuum and charging station with 1.5cfm deep two stage vacuum pump, rugged charging scale and aluminum block gauge set with hoses and manual couplers on heavy duty, lightweight, durable steel frame rolling cart. No need for different sized charging cylinders with Mastercool's rugged die cast electronic scale.  Simply place the refrigerant cylinder on the scale and charge.