3000 Watt 2-Channel High-Power Mosfet Amplifier to 3500 Watt Half Ohm Stable Mono Block Mosfet Digital Power Amplifier

This Lanzar MAX component speaker system comes with everything you need to replace your car’s factory sound system. It includes one pair of 6.5" mid-bass speakers constructed with -quality injection cones, non-fatiguing butyl rubber surround, and rubber magnet boots. And it pumps crystal clear sound at 200 watts peak. There’s also a pair of 1" silk soft dome tweeters capable of pushing 400 watts peak. The tweeters have three mounting options, including flush, swivel, and surface and angle mounts. All speakers have 4 Ohm impedance. Also included in the kit is one pair of passive crossover networks with 12 dB octave slopes – meaning you’ll direct the mids to the mid-bass speakers and the highs to the tweeters, resulting in an absolutely gorgeous sound. Includes custom wire-mesh grills, wires, and installation hardware.

Product Features:

• One Pair 6.5"Mid Bass Speaker:
• 6.5" Midrange Driver
• High Quality Injection Cone
• Non-Fatiguing Butyl Rubber Surround
• Rubber Magnet Boot
• 100 Watts RMS / 200 Watts Peak
• Frequency Response: 45-20KHz
• Impedance: 4 Ohms
• One Pair Tweeter:
• 1"Silk Soft Dome Tweeter

This Lanzar Mini-MAX MOSFET amplifier may look small, but it packs a huge punch – up 1000 watts of power Plus, it’s got tons of features, including an electronic crossover network, bass boost circuit, and the ability to bridge two channels for double the power. High and low-pass filter controls allow you to tweak the sound to your liking – and prevent nasty distortion and the fringes of the sound spectrum. Gold-plated RCA inputs keep your audio sounding crystal clear and noise-free. Takes both high and low-level inputs to maximize your possibilities. Line outs for left and right channels. Power and protection LED indicators let you know your equipment is secure.

Product Features:

• 2 x 250W RMS @ 4 OHMS
• 2 x 500W MAX @ 4 OHMS
• 1 x 1000W Max @ 4 OHMS Bridged
• 2 x 350W RMS @ 2 OHMS
• 2 Ohm Stereo Stable
• Bridgeable at 4 Ohms
• Nickel Plated RCA Inputs
• Low Pass Filter Controls
• High Pass Filter Controls
• Power and Protection LED Indicators

Lanzar’s Mini MAX amplifiers pack a huge sound into a small, compact engineered package. The MNX5000D is a single-channel monoblock amplifier powered digitally for maximum efficiency. This amplifier can push up to 5000 watts at 1 Ohm. It’s equipped with variable low pass and subsonic filters so you can get the most out of your vehicle’s speakers without blowing them out. The included wired remote allows you to adjust the bass boost level from the comfort of your vehicle. Gold-plated RCA connectors and screw down terminals ensure an extremely high-quality connection between your amp and other components. This amplifier is equipped with power and protection LED indicators, so you’ll always know its working properly. Soft turn-on/off prevents damage to your speakers while powering the unit on and off. And thermal, overload and speaker short protection keep your equipment safe and secure.

Product Features:

• 2100 Watts Peak Power @ 4 Ohm
• 3500 Watts Peak Power @ 2 Ohm
• 5000 Watts Peak Power @ 1 Ohm
• THD 4 Ohm Power 0.5%
• 1 Ohm Stable
• S/N Ratio (4 Ohm): 80dB
• Frequency Response: 10Hz-350Hz
• Variable LPF: 20Hz-350Hz
• Variable Subsonic: 15Hz-45Hz
• Phase Shift Control: 0-180°

A great sound system needs a great capacitor because high-demand audio setups can place extra demand on your car’s electrical system. When you need power, especially for booming bass and soaring highs, this 80 farad Vector-series capacitor will have it at the ready. And it’s got all you need to make sure your system sounds awesome and stays safe: a blue digital voltage readout to show you how much power is available, electronic polarity protection, and an over voltage protection circuit. And this won’t just make your system sound great – it looks great too, thanks to the flashing blue LED with printed Lanzar Vector logo. Packaged in an aluminum tooling box.

Product Features:

• Chrome Plated Case
• Blue Digital Display
• Flashing Blue LED Light with printed Lanzar Vector logo
• With 1*0/4ga in & 1*0/4ga out chrome plated NEG/POS power block
• Packaged in a aluminum tooling box
• Dimensions: 12.165"L x 7.149"W x 3.386"H

This Lanzar Mini-MAX MOSFET amplifier may look small, but it packs a huge punch – up 1600 watts of power on four channels Plus, it’s got tons of features, including an electronic crossover network, bass boost circuit, and the ability to bridge two channels for double the power. High and low-pass filter controls allow you to tweak the sound to your liking – and prevent nasty distortion and the fringes of the sound spectrum. Gold-plated RCA inputs keep your audio sounding crystal clear and noise-free. Takes both high and low-level inputs to maximize your possibilities. Line outs for left and right channels. Power and protection LED indicators let you know your equipment is secure.

Product Features:

• 4 x 200W RMS @ 4 OHMS
• 4 x 400W MAX @ 4 OHMS
• 2 x 800W Max @ 4 OHMS Bridged
• 4 x 320W RMS @ 2 OHMS
• 2 Ohm Stereo Stable
• Bridgeable at 4 Ohms
• Nickel Plated RCA Inputs
• Low Pass Filter Controls
• High Pass Filter Controls
• Power and Protection LED Indicators

When your speakers aren’t powerful enough, switch to Lanzar MAX! This 5" x 7" coaxial speaker provides up to 440 watts of three-way sound, thanks to the robust 15 oz. magnet structure. The high-quality injection cone and non-fatiguing butyl rubber surround provide a strong foundation. And this speaker achieves a fuller range sound because it’s equipped with a 1" high-temperature aluminum voice coil for a booming low-end, 2" titanium cone midrange speaker for rich mids, and super piezo tweeter for sweet highs. It’s all housed in a glossy black coated steel basket that looks great and fits most OEM locations. 4 Ohm impedance. Includes custom wire-mesh grills, wires, and installation hardware.

Product Features:

• Standard 5"x7" Size Fits OEM Locations
• High Quality Injection Cone
• Non-Fatiguing Butyl Rubber Surround
• 1" High Temperature Aluminum Voice Coil
• 2" Titanium Cone Midrange
• Super Piezo Tweeter
• Glossy Black Coated Steel Basket
• 15 Oz Magnet Structure
• Power Handling: 220 Watts RMS / 440 Watts Peak
• Frequency Response: 60-20KHz

The OPTI1537D from Lanzar features the latest in subwoofer technology, a truly flagship product delivering up to 10,000 watts of bone-shattering bass! This 15" subwoofer features a custom tooled die-cast aluminum basket, a woven carbon glass composite cone, and high-excursion surround for unprecedented loudness and clarity in your bass. The 365 oz. high-density ferrite magnet drives the 4" high-temperature ALR aluminum base voice coil for a powerful, immense sound that will destroy your competition. And it’s all delivered to you in a wooden box to keep your equipment safe until it reaches your door. The enhanced integrated voice coil cooling system protects your speaker from overheating. Includes installation hardware and template. Frequency response: 25 Hz to 300 Hz.

Product Features:

• Custom Tooled Die-Cast Aluminum Basket
• Woven Carbon Glass Filer Composite Cone
• Hi-Excursion Foam Surround
• 4 Inch High Temperature ALR Aluminum Base, PAARC(polyester treated resin coated) Voice Coil
• 365 oz High Density Ferrite Magnet
• 5,000 Watts RMS 10,000 Watts Peak Power Handling
• Frequency Response: 25-300Hz
• 2 Ohm + 2 Ohm Dual Voice Coil Impedance
• Efficiency: 89dB
• Extreme 4 Layer Conex Spiders & Loop Stitched Tinsel Leads

A great sound system needs a great capacitor because high-demand audio setups can place extra demand on your car’s electrical system. When you need power, especially for booming bass and soaring highs, this 12 farad Vector-series capacitor will have it at the ready. And it’s got all you need to make sure your system sounds awesome and stays safe: a blue digital voltage readout to show you how much power is available, electronic polarity protection, and an over voltage protection circuit. And this won’t just make your system sound great – it looks great too, thanks to the flashing blue LED with printed Lanzar Vector logo. Packaged in an aluminum tooling box.

Product Features:

• Chrome Plated Case
• Blue Digital Display
• Flashing Blue LED Light with printed Lanzar Vector logo
• With 1*0/4ga in & 1*0/4ga out chrome plated NEG/POS power block
• Packaged in a gift color box
• Dimensions: 11.495"L x 4.915"W x 2.87"H

Take your sound to the MAX with Lanzar’s MAX-series speakers. These 4" speakers push up to 140 watts max, thanks to the superb 15 oz. magnet. And these speakers are two-way, covering a wide frequency range with poise – for the high end, there’s a 0.5" titanium neo-tweeter, and for the mids and lows, a 1" high-temperature voice coil. These speakers are equipped with high-quality injection cones and non-fatiguing butyl rubber surround for a sound that’s crystal clear and distortion-free. The livid coated steel basket keeps your equipment secure. 4 Ohm impedance. Includes custom wire-mesh grills, wires, and installation hardware.

Product Features:

• Standard 4" Size Fits OEM Locations
• High Quality Injection Cone
• Non-Fatiguing Butyl Rubber Surround
• 1"High Temperature Voice Coil
• 0.5" Titanium Neo-Tweeter
• Livid Coated Steel Basket
• 15 Oz Magnet Structure
• Power Handling: 70 Watts RMS / 140 Watts Peak
• Frequency Response: 66-20KHz
• Impedance: 4 Ohms

Lanzar’s MAX PRO-series speakers are designed with the professional in mind – and they’ll push your audio to the MAX! This 12" small-enclosure sub with dual voice coils will add extra punch to your low-end and give you that huge sound you want. The sound is produced by a 2" dual-layer high-temperature Kapton voice coils with two 80 oz. heavy double-stacked magnets, pushing 1600 watts MAX power. It’s all housed in a stamped steel basket with hex key input terminal for heavy-duty stability. And your booming sound is enhanced by the wide, non-fatiguing rubber suspension, specially designed rubber magnet boot, and the bumped and vented motor construction. Dual 4 Ohm impedance.

Product Features:

• Black Non-Pressed Paper Cone
• Specially Treated Foam Edge Suspension
• Stamped Steel Basket w/Hex Key Input Terminal
• Bumped Vented Motor Structure
• Custom Designed Rubber Magnet Boot
• 2" Dual Layer High Temperature Kapton Voice Coil
• 80 + 80 oz. Heavy Double Stacked Magnet Structure
• 1600 Watts Peak Power
• Dual 4 Ohms Nom. Impedance
• Fs: 40Hz, Qms:5.0, Qes: 0.90, Qts: 0.75, SPL: 84(dB), Vas: 5.204(cubic feet)

When your current amp isn’t enough, switch to Lanzar MAX. This 2000 watt monoblock subwoofer amp is perfect for powering your subwoofer. It’s equipped with a MOSFET power supply, low level RCA inputs, and line level RCA outputs – everything you need from a quality amp. It’s also got extra features that blow the competition away: a variable low-pass filter and subsonic filter to cut out the distortion and let the smooth sounds in, and variable gain control and bass boost to let your low-end explode with power. This amplifier is equipped with thermal, overload, and short-circuit protection to keep your equipment safe. This slim-size amplifier design is sleek and easy to install.

Product Features:

• 2000W x 1 Output @ 2 Ohms
• Mono Block Subwoofer Amplifier
• 2 Ohm Stable
• MOSFET Power Supply
• Variable Low-Pass: 40 Hz-250 Hz
• Variable Input Level (Gain) Control: 6V-200mV
• Variable Bass Boost: 0~+18dB
• Variable Subsonic Filter: 10Hz~100Hz, 24dB/Octave
• Sub Sonic Switch
• Thermal / Overload / Short Circuit Protection

Boost your bass with this Optidrive Digital Bass Enhancer. This unit connects in-line with your current amplifier and speaker setup and has mounting holes for easy attachment to your system. Adjust the strength of your bass, which frequencies to boost, and use a subsonic filter to weed out unwanted noise. High headroom power supply ensures a high-quality signal with low noise. Lighted display for easy control and great looks. Inputs & outputs over stereo RCA.

Product Features:

• Max Bass Control
• Dash Mount Remote Control
• Bass Restoration Lighted Display
• PWM High Head Room Power Supply
• Frequency Response: 10Hz - 100KHz
• Balance Input Noise Rejection: 60dB
• Parametric Bass Control
• PFM Subsonic Filter
• Balanced Inputs
• Bass Output Control