3 Piece Oil Canister Socket Service Set to 4 Wheel Drive 1/2" Square Drive Spindle Nut Wrench

27mm used on VW; 32mm used on GM and Saturn; 36mm used on Volvo, VW, and Ford Trucks
Low profile - up to 50% less width for better access
Complete in blow mold case for easy storage
Black oxide and laser marked - product identification and part numbers on each socket

Three 3/8" square drive sockets with hex bits

Used to remove and replace floating caliper mounting bolts

3/8" and 8mm hex bits for GM and 1/4" hex bit for Ford

Made in the USA

Skin-packed This set is outstanding for brake caliper repairs.  The sockets are precision formed to exact dimension tolerances for a perfect fit. Also made from heat treated, tempered alloy steel that provides high strength and durability.  These sockets have been tested in the "field" with professional users and the quality is superb!

Removes filters 3-7/16" to 3-3/4" (87mm to 95mm) in diameter

Band will not crush filter

Caution. Do not use with power tools This square drive oil filter wrench is made and used for the hard to reach areas. It's simple to use, place the wrench on the filter, use a 3/8" square drive tool to remove.  Made with quality and safety needed for a good performance!

100 grit
4" replacement stones coarse This coarse 100 grit stone is used for the rough honing.  The stones are used on the 2833 Engine Cylinder Hone.  It's a one step replacement!

Removes oil pressure sending unit on most engines
3/8" drive socket has 1" and 11/16" hex opening plus recess to accommodate switch
Also fits some brake light switches, can be turned with 15/16" wrench or 3/8" square drive tool

With 1/2 turn clearance, 180 degree flex head eliminates the need to reposition Torx key

High polish chrome finish and fully hardened forging for optimum performance

Ergonomically designed beam for comfort and leverage

Uses only 5º of swing for tight access performance

Curved back handles for added leverage and less slippage

Full function cutting and grip on Long nose /    Multi function

High leverage teeth angle on Groove Joint for improved grip on fasteners

Slim head design / access

Exclusive rounded inside edges / comfort 3 piece standard pliers set includes: (82011) 9.5" Tongue and Groove Plier (82012) 7" Diagonal Cutting Plier (82013) 8" Long Nose Plier.

Patented bit holding system forces bit surface to opposing side for maximum retention
Chrome sockets; heat treated for durability and service ability
S2 and Alloy steel bits

Patented bit holding system forces bit surface to opposing side for maximum bit retention - strength
Heat treated socket base for durability and service ability
Chrome socket; S2 and alloy steel bit

Reversing mechanism with the flip of a lever
15 degree offset offers increased clearance
Surface Drive box end virtually eliminates the rounding of fasteners
Fully hardened, mirror finish This unique open end wrench has a ratchet in the boxed end. Low clearance is able to fit in tight places that a regular ratchet can't.

15% longer than current flex head wrenches, or up to 37% longer than the competition
Increased length to access those hard to reach fasteners
Surface Drive Plus provides stronger grip on fasteners and nearly eliminates fastener rounding
13 locking positions with flexible head
One finger operated lever with options of "locking" or "not locking" positions Ratcheting box end needs as little as 5 degrees to move fastener vs. 30 degrees for standard box end wrenches.

This is used to remove and replace the thermostatic fan assembly on Ford 4.9-L E and F series
Replacement part: 3136-76 Long wrench 36mm
Replacement part: 3136-77 Short wrench 58mm
Refer to Ford factory service manual for torque specifications and thread direction Use this 2 piece set with truck engines 1984 through 1993, Ford 4.6-L modular engines, 2.8-L engines 1984 through 1987, 2.9- to 3.0-L engines 1988 to current and 4.0-L engines 1990 to current.  Use with 1/2" square drive tools and torque wrench.

Box ends provide strong grip on the fastener and needs as little as 5 degrees to move the fastener

Surface drive nearly eliminates fastener rounding

Sleek head design enables access to tight spots where a ratchet will not fit

GrearWrench products are warranted for life to be free of defects in material and workmanship Set includes sizes: 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 18mm and is warranted for Life to be free of defects in material and workmanship.

Rings at base provide quick SAE identification
Large hard stamped part number and size on both sides of socket for easier visibility to socket size
Packaged in patented slide rail for easier positioning of sockets - internal slide rail eliminates interference / ball bearing retention
Entry angle guides fastener
Turn down at base of socket provides grip surface to pull sockets off ratchets11 Piece 1/2" Drive 6 Point Standard SAE Socket Set includes: 1/2" through 1-1/8" Standard Sockets packaged on a clip rail.  Entry angle guides fastener.  Serrated depth as deep as the fastener.  Large hard stamped identification.  Double line to easily identify SAE vs. metric sockets.  Made of 6130 Alloy steel and full polish nickel chrome plated.

Full polish handle designed for clean look and ease in cleaning
Low profile, teardrop ratchet head with fine tooth ratcheting action for a smaller ratcheting arc and better access in tight spaces
Balanced handle for overall comfort

Adapter pressurizes brake systems on many applications across many makes
Use with 3-1/2" round reservoirs
Adapter for use with 3795 and 2901 brake bleeding tanks

LCD displays up to 5 digits - greater accuracy
Glass window over LCD is clearer and does not wear out
Color coded for Off, On/Zero, and Inch/mm
Stainless steel frame with hardened jaws, graduated scale, and thumb roll
Packed in blow mold case Measures up to 6" and the LCD displays up to 5 digits. 4 way measurement, inside, outside, depth and step. Resolution: / Repeatability .0005 x .01mm. Stainless steel frame, hardened jaws, glass window over LCD for protection.

901 Air hold fitting set Use to apply air pressure to keep valve closed while replacing valve spring. 14mm and 18mm adapters threaded for 1/4" NPT. Remove spark plug and screw air hold into port. Fasten air hose to fitting and apply pressure. Use with 912, 915, 2078, 3087, or 3271 Valve Spring Compressors.

Wrench is made of high quality steel with a zinc-plated yoke and a blackened band for resistance to rust and corrosion
The Plastisol-dipped handle will not slide off during use
Even hard to reach oil filters will come off easily with the swivel-handle oil filter wrench
The unique yoke and link assembly allows a good grip, but will not crush the filter
Wrenches swivel tension is adjusted easily by using the nut and bolt on the handle

Long reach Torx ideal for headlight and other deep access fasteners 
Includes T15, T20, and T25 sizes 
Tri-Lobe ergonomic handle to obtain optimal balance of strength and comfort 
Oil and solvent resistant 
Laser etched part number and size on each blade Great for transmission, headlight, and other deep access problem areas. 

15% longer than current flex head wrenches, or up to 37% longer than the competition
Increased length to access those hard to reach fasteners
Surface Drive Plus provides stronger grip on fasteners and nearly eliminates fastener rounding
13 locking positions with flexible head
One finger operated lever with options of "locking" or "not locking" positions Ratcheting box end needs as little as 5 degrees to move fastener vs. 30 degrees for standard box end wrenches.

English range: 25 to 250 in-lb.; Metric range: 3.61 to 29.03
Micrometers locking ring maintains setting during operation
Rubber dust seal at neck keeps dirt out of the inner mechanism
Chrome finish for long lasting corrosion resistance
Pliable, elastomer handle grip provides superior comfort and high resistance to oil and grease Fast, accurate and easy to use torque wrenches have accuracy positive/negative 4 percent right hand (clockwise) and positive/negative 6 percent left hand (counter clockwise).  The reversible ratchet head features a 45 tooth ratchet design requiring only 8 degree of hand travel for indexing.  English and metric markings are color coded for easy reading.  Ball bearing-mounted internal torque control mechanism provides proper lubrication, high accuracy, pro-longed calibration life and consistent results.  Positive, spring-loaded locking mechanism automatically locks in the selected reading to prevent accidental change. This 3/8" drive micrometer torque wrench comes packaged in a clamshell.

Eliminates the problem of reaching around obstructions
Features 2 double reversing 5 degree ratcheting heads
Each box end features a reversing lever on both sides of the wrench that allows direction changes from either side
Allows the fastener to be moved as little as 5 degrees in both directions without removing the wrench

For use with 3/8" drive tools.

Product Features:

• Push-button for quick release
• Thumb wheel for quick adjustments

Patented low profile and performance head for both greater accessibility and strength

6 flexible head positions for extreme access

60 Tooth Gear System for improved strength and productivity

Tear-drop shaped head for better access

Use tool to file ignition and other small objects The thin blade has a fine grid on both sides and is ideal for removing carbon from points

Use on 1985 to current Ford F250-350 with Dana 80 rear axle, and 10-1/4" ring gear

Use on 1987 E350 to current with Dana 80 rear axle and 10-1/4" ring gear

Use on 1988 to current F super duty with Dana 80 rear axle and 10-1/4"

Use with 1/2" square drive tool Specially designed wrench removes Ford high-sheer ratcheting lock nut on popular Ford F250/350 series trucks.  Special features include a centering snout to help locate the special axle nut and uniquely designed lugs for maximum strength.  Use on rear axles of 1985 and newer 2 - wheel - drive Ford F250/350 trucks. 

Throat depth 9-3/4" and jaw opening 2-3/4" to 7-3/4" fits larger engine sizes

Jaws and plunger bar are easily adjusted

Plunger bar seats on both flat and cup shaped valve heads

Includes K-D 32 offset and K-D 35 straight jaws

Offset and straight jaws are included This valve spring compressor compresses the valve springs on overhead valve and L-head engines on cars, trucks and tractors.  The jaws are made to fit larger engine sizes and are easily adjustable.  This tool saves time and makes the job easier!

Wrench features uniquely designed lugs for maximum strength

Use with 1/2" square drive

Outer diameter: 2.60"; Inner diameter: 2.23"

Length: 2.94"

Inside depth: 2.375"This 6-lug wrench removes spindle nuts on 4-wheel drive vehicles.  It's used for the following applications: 1973-1981 GM 3/4 and 1 Ton 4WD trucks; 1978-1984 Ford F250-350 Trucks; 1984-1992 Ranger, Bronco with manual hubs; 1990-1993 Dodge Trucks with Dana 44.