Glow Plug to GM Fuel Module Disconnect Tool

Viton seals to protect coils from exhaust gas damage. Advanced tip technology for a long working life. Application-specific to ensure a proper fit.

Engines & Ignition > Ignition & Tune-Up > Diesel Glow Plugs

Engines & Ignition > Ignition & Tune-Up > Diesel Glow Plugs

Engines & Ignition > Ignition & Tune-Up > Diesel Glow Plugs

Engines & Ignition > Ignition & Tune-Up > Diesel Glow Plugs

Engines & Ignition > Ignition & Tune-Up > Diesel Glow Plugs

Engines & Ignition > Ignition & Tune-Up > Diesel Glow Plugs

Engines & Ignition > Ignition & Tune-Up > Diesel Glow Plugs

Engines & Ignition > Ignition & Tune-Up > Diesel Glow Plugs

Wells Vehicle Electronics is a leading global supplier of advanced vehicle electronics solutions for original equipment and replacement applications. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability. Wells offers extensive application information and technical support.

A regular preventive maintenance program helps keep your diesel vehicle running right. Bosch Glow Plugs with Duraterm® technology are designed to deliver enhanced cold-start performance.

Tools, Fluids & Garage > Gaskets, Sealers, Grease & Lube > Sealers

Designed to let you lever out dents from the panel surface without damaging the paint, no holes to drill and no interior panels to be removed
Works on panels where conventional tools will not reach - no limitations by unseen restrictions behind the panel
Made from lightweight, durable aluminum
Dual lever action for even weight distribution while pulling
Nylon knock down will not mark the paint surface Kit contents: Lightweight dual lever dent puller, two sizes of pulling knobs, two strengths of specialized glue, Nylon knockdown to finish the work, and professional glue gun. The Glue Puller is guaranteed for 1 year against defects in materials and workmanship.

Works with a 1/2" drive
Skin-packed
Rugged design for durability
For the use on GM 3-1/4" Removes the 3-1/4" drain plug on GM four cylinder cars where the oil filter is in the pan.  Works even if the original hex on the plug has been rounded off.  Simply install wrench into recess in plug and turn counter-clockwise to loosen.  Reverse procedure to install.

Cooling & Heating > Thermostats, Gaskets & Housing > Thermostats

Made of durable ABS plastic
No more mess, no more spill
Attaches directly to the engine oil filler neck
Made in the U.S.A. This item is to be used for clean, no mess, engine oil fill on Ford  valve covers and fill necks with dual opposing tabs and GM vehicles with a single tab.

In-depth coverage of popular GM transmissions with complete overhaul photo sequences. Also covers theory of operation, in-vehicle repairs and modifications. Covers THM 200-4R, THM350, THM400 and THM700-R4 transmissions, and THM125/125C, THM3T40, THM440-T4 and THM4T60 transaxles.

Dorman offers a comprehensive line of Battery Hold Downs for a wide range of applications. All our Battery Hold Downs are constructed of high-quality materials for long-lasting durability.

Product Features:

• Available in many different styles, including straight and hooked
• Available in a large variety of lengths, diameters, and sizes
• Direct replacement Battery Hold Downs available (where applicable) to ensure a proper fit
• Conveniently packaged in a variety of piece counts to assist with both small and large projects

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:

• Includes all parts needed for retrofitting
• More cost effective than R12
• Converting to R134 is less harmful for the environment
• Compatible with all newer compressions

18 adapters included to remove and install ball joints
Application cross reference and instructions included
Works on upper and lower ball joints on: 1996 - 2008 Chevrolet, Buick, Pontiac, Oldsmobile, and Cadillac cars with press in ball joints
For use with OTC USA made C frame
Does not include the 7248 C-Frame press Includes reference guide thru 2008 referencing press fit or bolt in ball joints, adapter application diagrams and charts, and quick reference charts.

Fits 1-1/16" switches up to 2-5/8" long, found on newer GM and Chrysler vehicles
Fits 1-1/16" oil pressure sending unit (gauge type), found on most all '91 and newer GM vehicles
Also fits '87 and newer Chrysler vehicles with combination light and gauge oil pressure switches
Use with 3/8" drive or 1-1/8" hex
Skin-packed Shipping wt. 5 oz.

Retrieves trouble codes from late model GM vehicles
Three tools in one
Tool retrieves codes from engine computer, rear wheel anti-lock brake computer and four wheel anti-lock brake computer and four wheel anti-lock brake computer
Key probes jump terminals on Assembly Line Data Link connector (ALDL) to activate trouble codes Refer to a repair manual for proper code interpretation. Skin-packed. Shipping weight 1 oz.

These tools adjust various settings on Rochester Quadra Jet, DualJet, and VaraJet carburetors on most GM vehicles having the 3C system Applications include: 2mm double-D - VaraJet lean authority screw and idle air bleed; and DualJet and QuadraJet mixture control adjusting screw; 2.5mm hex - DualJet and QuadraJet TPS adjusting screw; 7mm double D - DualJet and QuadraJet main metering jets; 10mm double D - DualJet and QuadraJet mixture control solenoid-rich screw.

Chrome finish. CS130 GM alternator upgrade. 105-amp, OE hookup. Left mount. 6-groove serpentine pulley.

Product Features:

• OE hookup
• Chrome finish
• Street Rods, Muscle Cars, Trucks

Easily install replacement silicon bronze bushings on door hinges in restricted areas
Installs bushings accurately and guides / holds the bushing in place
Can be used with pliers or small hammer to install bushing
Tool allows access to the restricted area of the hinge that is not accessible for a straight and true installation
Works on GM vehicles that have replaceable bushings With this unique tool you can easily install the replacement silicon bronze bushings on door hinges. In usage, the restricted area of the hinge is not accessible for a straight and true installation of the bushing. This tool allows easy access when installing the bushing. It accurately guides and holds the bushing in place while the technician either taps the tool with a hammer or squeezes it with pliers to install the bushing. Works on GM vehicles that have replaceable bushings including the following: Small pick-ups (S10 and Sonoma) 1982-2004; 1/2 and 3/4 ton trucks 1980-1999; One ton trucks 1980-2001;  Blazer 1980-2005; Suburban 1980 and later; Tahoe 1980 and later; Vans (Astro & Express) 1980 and later; Avalanche 2002 and later.

Fits GM front wheel drive vehicles with engine torque struts
Safely holds engine in place
Extra bolt holes provide fit on all vehicles
Includes adapter 419A  This is used on front wheel drive vehicles.  It replaces the existing strut and allows the engine to be tilted forward to access spark plugs, distributor, ignition coils, rack and pinion steering gear, power steering hoses, etc.  This gives a safe and secure hold while the motor is tilted for better access.  It’s easy to use and install!

Street Fire is making ignition maintenance easy for you! The cap, rotor and even plug wires all need to be considered as maintenance items. These new Street Fire cap and rotor kits are designed to deliver quality at a value price and are supplied with brass terminals and a heavy duty rotor.

Product Features:

• OE replacement parts that make maintenance a snap
• Quality components at a value price with confidence
• All new components specified by MSD engineers
• One year warranty on all Street Fire products
• Brass terminals for improved spark transfer
• Made with heavy duty rotor parts

Applications: 2002 - newer Tahoe and light-duty trucks with the 5.3L V8 engine
Similar to Kent-Moore No. J-46363This is a required tool to remove the fuel line from the fuel filter.

Disconnects the fuel module on 98 and later GM full size pickups, Suburban and Tahoe
The 2 piece design allows access to the connectors
Fits both 3/8" and 5/16" connector sizes
Will also fit all other 3/8" and 5/16" applications
Shipping wt. 1 oz. Slide the proper size end into the connector. Then rotate and slide the other half in place. Now the module can be disconnected. The tool can be clipped together for convenient storage.