-
Your Store:
-
See if this part fits a specific vehicle.
| Connector Gender: | Female |
| Terminal Gender: | Male |
REVIEW SNAPSHOT®
by PowerReviewsPros
Cons
Best Uses
REVIEWS
Reviewed by 6 customers
Sort by
Displaying reviews 1-6
Pros
Cons
Best Uses
Comments about BWD EGR Control Solenoid:
This control solenoid for the EGR valve did not work for my auto. It made the EGR valve get hot and start smoking. The engine idled rough because the solenoid was opening the EGR valve while idling. I had to reuse my old solenoid. I don't think that was my problem any way.
Pros
Cons
Best Uses
Comments about BWD EGR Control Solenoid:
My EGR Valve was getting vacuum constantly, Which means the vacuum solenoid is no good. So I bought this from my local Advance Auto & put it in. Same problem. So I brought it to my dealer shop and hooked it up to the computer & it had the same problem. The part was faulty. Be Warned. Go with factory motorcraft for this part.
Pros
Cons
Best Uses
Comments about BWD EGR Control Solenoid:
was letting vacuum to EGR valve at idle. Returned it and next one was better.
Pros
Cons
Best Uses
Comments about BWD EGR Control Solenoid:
Had to return item and get a second one. First one did not work. After a whole day of trying to figure out why truck was putting, realized the part was not functioning right. Had to return it and replace.
Pros
Cons
Best Uses
Comments about BWD EGR Control Solenoid:
kept the engine light off
Pros
Cons
Best Uses
Comments about BWD EGR Control Solenoid:
best part ever
Displaying reviews 1-6
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
Q:
WHERE IS LOCATED1 answer
CUSTOMER CARE
A:
For further assistance regarding BWD EGR Control Solenoid, Part No. EGR3001, please provide the year, make, model and engine size of your vehicle. This information would help us to assist you in a better way.Q:
I have a 1999 Mustang 3.8 I replaced the EGR valve however I'm still getting an EGR fault code and the engine runs rough after warm up..do I go for the solenoid?1 answer
CUSTOMER CARE
A:
Without the presence of your vehicle we would not be able to properly diagnose it nor provide you with a 100% answer. We would suggest that you take your vehicle to a certified mechanic for further diagnosis. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.Q:
where is it at and is it a vaper management valve 2000 mustang1 answer
CUSTOMER CARE
A:
This BWD EGR Control Solenoid - part# EGR3001 is also referred to as EGR Vacuum Solenoid. The EGR vacuum solenoid is located just below and to the left of the passenger-side coil pack. It has two vacuum lines coming off of it as well as an electrical connector. For any further assistance, please call us at 1-877-ADVANCE (238-2623) and we would be more than happy to assist you.Q:
where is this located on a 1999 v6 mustang 3.8? Manual Transmission?1 answer
CUSTOMER CARE
A:
The EGR control solenoid should be located next to the egr valve to the left side of your engine in your 1999 Ford Mustang V6.Q:
DO YOU CARRY THE HOSES THE RUN FROM EGR CONTROL SOLENOID TO THE EGR VALVE AND THE INTAKE /1 answer
CUSTOMER CARE
A:
We greatly appreciate your taking time to submit a review. Please call us at 1-877-ADVANCE (238-2623) and we would be more than happy to assist you.Q:
Ok here we go.2002 ford ranger 3.0 non flex.Start truck let it sit and idel after a few min. it shuts off. turn key off and it restarts fine. Driving down the road it will bog just for a secound then all is fine. Does this every time I drive the truck. No check engine lite no codes. Should engine be running when checking codes?1 answer
CUSTOMER CARE
A:
I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem.Q:
where the egr control solenoid on 1998 ford escort zx2 located1 answer
CUSTOMER CARE
A:
The EGR solenoid is located behind the intake manifold.Q:
after having to replace my battery my f150 randomly stalls,have replace the EGR valve,do you thank that this solenoid needs to be replace also.or do you any ideal why this started to happen after replaceing the battery?1 answer
CUSTOMER CARE
A:
It could be a number of things causing this. Unfortunately we are unable to diagnose what is wrong with your vehicle without being able to be there with your vehicle. We highly recommend taking your vehicle to a reputable shop to have them take a look at it to determine the cause.Q:
If this is not operating properly, would it cause the EGR Tube to rot out and break down and or would this mean I have a plugged catalytic converter because of the the fore occurring situation?1 answer
CUSTOMER CARE
A:
I would suggest taking your vehicle to a certified mechanic for a proper diagnosis of what would have caused your EGR tube to break down before buying and having parts installed that may not (solve/be) the problem.Q:
this solenoid on my '97 f150 makes a rattling noise after I shut the engine off, does this mean its bad?? if not, what does this mean??1 answer
CUSTOMER CARE
A:
This might be the problem. However, I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem.