-
Your Store:
-
| Braided Stainless Reinforcement: | Yes |
| Exhaust Clamps Included: | Yes |
| Finish: | Tin Coat |
| Inlet Attachment Type: | Clamp |
| Inlet Diameter: | 2.5 in |
| Material: | Steel |
| Outlet Attachment Type: | Clamp |
| Outlet Diameter: | 2.5 in |
| Overall Length: | 18 in |
| Weldable Metals: | No |
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
Q:
Can Flex-O-Pipe leak exhaust gases around the many flex joints or is the metal completely sealed? Also, is the inside of the pipe smooth as to not cause a restriction of gas flow?1 answer
CUSTOMER CARE
A:
This Rol Exhaust Flex-O-Pipe 2-1/2 inch ID - part# 540250 is completely sealed and the inside of the pipe is smooth and does not cause a restriction of gas flow. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Q:
can this be reduced to fit a smaller exaust pipe about 1" to 1.5" diameter1 answer
CUSTOMER CARE
A:
Sorry, this Rol Exhaust Flex-O-Pipe 2-1/2 inch ID (Part No. 540250) does not work fine with exhaust pipe with 1" or 1.5" diameter. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.Q:
What do i use to cut it?1 answer
CUSTOMER CARE
A:
For cutting this part Rol Exhaust Flex-O-Pipe 2-1/2 inch ID - Part No. 540250, you can use a Chop saw which leaves a smooth edge but some deburring may be required or a Band/Hack saw which also leaves a rough edge and may requires trimming and deburring. For any further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and our representatives would be more than happy to assist you.Q:
can i cut this pipe to fit?1 answer
CUSTOMER CARE
A:
Yes, you can cut off the amount you need. However the advantage of the pre-cut lengths is that the ends are crimped at the factory after being cut, making sure that there are no problems fitting the connecting exhaust pipe.Q:
My catalytic converter was stolen off of my car. Can I use this pipe to connect the muffler back to the engine to reduce noise? My car is VERY old and no longer requires emissions testing, I just need a cheap way to dampen the rumble until I can get the money to have it properly fixed.1 answer
CUSTOMER CARE
A:
Yes, it can be used to connect the muffler back to the engine. But, you will have to check on the outlet diameter of the existing pipe to match for it.Q:
can this be clamped on to existing pipe then to the muffler1 answer
CUSTOMER CARE
A:
Yes, it can be clamped on. But, you will have to check on the outlet diameter of the existing pipe to match for it.Q:
HOW LONG IS THIS PIPE?1 answer
CUSTOMER CARE
A:
About 18"Q:
what is the length o f this flex pipe1 answer
CUSTOMER CARE
A:
About 18"