-
Your Store:
-
See if this part fits a specific vehicle.
| Bolt Hole Quantity In Pan: | 14 |
| Gasket Material: | Rubber |
REVIEW SNAPSHOT®
by PowerReviewsPros
Cons
Best Uses
Most Liked Positive Review
Worked well
I didn't need the gasket since mine was reusable, but saved it since it looks like it's good quality. Filter was the fiber-mesh like what I had, not just a screen.
I didn't need the gasket since mine was reusable, but saved it since it looks like it's good quality. Filter was the fiber-mesh like what I had, not just a screen.
VS
Most Liked Negative Review
OK for replacement
If holes in gasket were smaller (almost same diameter as bolt)it would be easier to hold gasket in place while starting bolts in transmission. Many after market gaskets have these but this one ...Read complete review
If holes in gasket were smaller (almost same diameter as bolt)it would be easier to hold gasket in place while starting bolts in transmission. Many after market gaskets have these but this one does not.
REVIEWS
Reviewed by 14 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
Cons
Best Uses
Comments about Pro-King Automatic Transmission Filter Kit:
i would rather go to the dentist than change transmission fluid and filter, but at least the kit worked well.... the filter fit fine, the gasket was flimsy but mine is a reusable one so i didn't need the one in the kit.. if you use the one in the kit use some sticky gasket seal to hold it in place or you will fight it the whole time
Pros
Cons
Best Uses
Comments about Pro-King Automatic Transmission Filter Kit:
Found a small white plug in the pan, found out it was in from factory as a plug only for trans during shipping toss it looks like a small white spinning top dradle type thing w o-ring on it... toss it if you find one floating in there.
Pros
Cons
Best Uses
Comments about Pro-King Automatic Transmission Filter Kit:
good replacement filter
Pros
Cons
Best Uses
Comments about Pro-King Automatic Transmission Filter Kit:
Once I got the correct torque setting and torqued in a cross pattern didn't have any more leaks.
Pros
Cons
Best Uses
Comments about Pro-King Automatic Transmission Filter Kit:
easy to install, helps keep fluid clean.
Pros
Cons
Best Uses
Comments about Pro-King Automatic Transmission Filter Kit:
It's a tranny filter kit, what else can I say about it... other than it does the job it was intented for.
Pros
Cons
Best Uses
Comments about Pro-King Automatic Transmission Filter Kit:
Has the same mesh material as the OEM part. Basically a direct replacement, stuck it up in my transmission and heard the click, it held up there in place.
Pros
Cons
Best Uses
Comments about Pro-King Automatic Transmission Filter Kit:
great product
Pros
Cons
Best Uses
Comments about Pro-King Automatic Transmission Filter Kit:
Product was easy to install. And with a new filter and new tranission fluid, my truck is shifting like a dream.
Pros
Cons
Best Uses
Comments about Pro-King Automatic Transmission Filter Kit:
I didn't need the gasket since mine was reusable, but saved it since it looks like it's good quality. Filter was the fiber-mesh like what I had, not just a screen.
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
Q:
On my 2000 F150, how many quarts of fluid will I need? I plan on draining the torque converter along with replacing the filter. Also, what is the inch pound bolt torque and is there a particular pattern I should use?1 answer
CUSTOMER CARE
A:
The quarts of fluid may vary depends on the cylinder quantity of the vehicle. In order to assist you further, please provide the engine size of your vehicle application or you can contact us directly at 1-877-ADVANCE (238-2623) or visit your nearest Advance Auto Parts store for further assistance.Q:
I have a 2005 Ford F-150 XLT 5.4 liter motor, is the 4R75W transmission the only one that was available for this truck, if not how do I find out which transmission I've got?1 answer
CUSTOMER CARE
A:
With reference to your inquiry on the Driveworks Automatic Transmission Filter Kit -part# DW-FK266, matched to the new 5.4-liter V-8 is a new 4R75E automatic transmission, an evolution of the 4R70E used on the current F-150. Upgraded to handle the torque of the 5.4-liter engine, this transmission shares patented upgrades with the 4R70E, which backs the 4.6-liter V-8. For assisting you further, please provide the VIN of your vehicle. You may also call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store one of our Parts Pros will gladly assist you with any questions or concerns you may have.Q:
How many quarts of fluid will I need when I change the transmission filter in my 2004 Ford Mustang?1 answer
CUSTOMER CARE
A:
You will need 5 quarts of fluid while changing the transmission filter on your 2004 Ford Mustang. For further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.Q:
I have your FK266 transmission pan gasket and filter kit for my 96 Ford F-150 P/U with a 5.0 L engine and 4R70W transmission (14 bolt pan). My question, can I drain the torque converter on this model. I see a round rubber boot about 1 1/2" diameter on the bell housing. Is this for getting to the torque converter to drain it?1 answer
CUSTOMER CARE
A:
It may have a Drain Plug if you have an old Torque Converter as it had one when it came out in 1995. But if it is a 1995 with a replacement 4R70W Transmission and a newer Torque Converter made after April 2002 then it will not have a Drain Plug. The rubber plug is normally 1 or 1.5" in diameter on the bottom of your bell housing that give's you access to your torque converter drain plug. For any further assistance please feel free to call 1-877-238-2623 and one of our representatives will gladly assist you with any questions or concerns you may have.Q:
DOES THE GASKET IN THE KIT NEED ANY TYPE OF SEALANT TO MAKE IT LEAKFREE OR JUST BOLT IT IT?1 answer
CUSTOMER CARE
A:
No, there is no need to add any type of sealant or glue to the gasket. This Pro-King Automatic Transmission Filter Kit with Part No. FK-266 is a bolt in type only.Q:
2000 ford e-150 conversion van. v8 engine want to change tranny oil/filter how many qts do i need1 answer
CUSTOMER CARE
A:
If only changing the transmission filter on your 2000 ford e-150, it should take five to six quarts and if it is completely empty, then it should take about ten to twelve quarts.Q:
When I change the transmission filter, Mercury Mountaineer, 5.0 Liter V-8, how many quarts of oil is required?1 answer
CUSTOMER CARE
A:
6 Quarts of transmission fluid is required when changing out the transmission filter.Q:
How much fluid do I need to fill my trans after I change the filter?1 answer
CUSTOMER CARE
A:
For further assistance, please provide the year, make, model and engine size of your vehicle.Q:
When dropping the pan and filter a small plastic check valve with O ring came out also. Where does it go?3 answers
CUSTOMER CARE
A:
For further assistance, you may need to get a repair manual on your specific vehicle.A:
When I was reading the Chilton's manual it says that it is a piece that was left in your transmission from the factory. It was used to keep dirt and other debris out of the transmission during assembly. It also said you should ONLY see this on your first trans service and to dispose of it.A:
I think what you're refering to looks kind of like a fishing bobber. This is just a piece that's put in to plug dipstick hole when transmission is manufactured and filled in upside down position and then the pan put on. when dipstick is inserted in transmission it knocks this plug out and has no further use, just throw it away. All it really means is that the pan has not been off you're transmission before.Q:
My Van Jerks when I am stopped at a light( while still in gear)1 answer
CUSTOMER CARE
A:
Unfortunately, since we can not be there with your vehicle, we can not properly diagnose what is wrong.