-
Your Store:
-
Hover over the image to zoom in
Related Categories
2005 - 2007 Ford Mustang GT Coolant Temperature Sensor (part#WT3058P)
See if this part fits a specific vehicle.
Brand: BWD
Advance Auto Parts Part#: 18480061
Suitable vehicles: Click to find if this product can be used with your vehicle:
Advance Auto Parts Part#: 18480061
Suitable vehicles: Click to find if this product can be used with your vehicle:
- Ford
- Mustang GT
- 2007
- 2007 Ford Mustang GT (4.6L 281CI V8 FI VIN: H)
- 2006
- 2006 Ford Mustang GT (4.6L 281CI V8 FI VIN: H)
- 2005
- 2005 Ford Mustang GT (4.6L 281CI V8 FI )
- 2007
- Mustang GT
This temperature sensor's design specifies tight tolerance thermistor response values to ensure the accuracy of the temperature measurement and proper part operation.
Back To Top
| Connector Gender: | Female |
REVIEW SNAPSHOT®
by PowerReviewsBWDCoolant Temperature Sensor
(based on 4 reviews)
Ratings Distribution
0%
of respondents would recommend this to a friend.
Pros
Cons
Best Uses
- Reviewer Profile:
- Mechanic (3)
- Was this a gift?:
- No (4)
REVIEWS
Reviewed by 4 customers
Sort by
Displaying reviews 1-4
Pros
Cons
Best Uses
Comments about BWD Coolant Temperature Sensor:
1999 Ford Explorer. Did not work after installation. Wire harness voltage tested O.K. Swapped it with another from a different parts supplier and it worked.
- Was this a gift?:
- No
Pros
- I got a refund
Cons
- Part was defective
Best Uses
- None
Comments about BWD Coolant Temperature Sensor:
Difficult to install and then to find out it was defective made things that much worse. I got a refund and bought the better grade one.
- Was this a gift?:
- No
Pros
- None
Cons
- Incompatible
Best Uses
- To waste money
- Waste time
Comments about BWD Coolant Temperature Sensor:
This part isn't compatible with my 1997 Ford Explorer. The 1st one was a non working part, the second one didn't work either. The 3rd one I got somewhere else and it worked fine. Don't waste your time or money. Chances are, it won't work for your vehicle, or will be a faulty part.
- Was this a gift?:
- No
Pros
Cons
- Incompatible
Best Uses
Comments about BWD Coolant Temperature Sensor:
This part is incompatable with my 97 f150 4.2, I installed the part and, it did not work, I then bought the part from a competitor for ([$]) half the price you charged, the part also had lock-tite inbeded in the tread to insure a tight fit, yours did not, after installing the part, it worked perfectly with no leaks. The part I bought from you guys was not the exact to the part I replaced, the part I bought form your competitor was identical to the oe part I replaced.
- Car & Truck:
- Casual Driver
- Was this a gift?:
- No
Displaying reviews 1-4
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
49 Questions | 52 Answers
Displaying questions 1-10Previous | Next »
Q:
where is this sensor located on a 2006 ford mustang gtAsked on 4/27/2013 by bob1 answer
CUSTOMER CARE
A:
The BWD Coolant Temperature Sensor (Part No. WT3058P) is located on the very back of the intake manifold, more to the right side of the engine in 2006 Ford Mustang GT. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 4/27/2013 by Max from AAP
Q:
Where would I find this on my 2003 F350 V10? Shows intake, right behind the Alt in the Manual, but it isn't there"Asked on 3/1/2013 by toyguy574 from Granger In1 answer
CUSTOMER CARE
A:
With reference to your inquiry on the BWD Coolant Temperature Sensor - part# WT3058P, the coolant temperature sensor on your Ford F350 should be located in the thermostat housing. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 3/1/2013 by Vincent from AAP
Q:
Where would I find this on my 2003 V10? Shows intake, right behind the Alt in the Manual, but it isn't thereAsked on 2/28/2013 by toyguy from Granger In1 answer
CUSTOMER CARE
A:
This BWD Coolant Temperature Sensor - part# WT3058P is vehicle specific. For assisting you further, please provide the year, make, model and engine size of the vehicle. You may also call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 3/1/2013 by Vincent from AAP
Q:
Can you tell me where I would find the coolant temp sensor on a 2003 Ford F250 with a 5.4 engine. I thought it would be right by the thermost but it is not anywhere to be seen.Asked on 2/21/2013 by Bill from Naples, Florida1 answer
CUSTOMER CARE
A:
With reference to your inquiry on the BWD Coolant Temperature Sensor - part# WT3058P, the coolant temperature sensor on your 2003 Ford F250 should be located on the front of the engine just to the left(looking at the front of the engine) of the alternator and just a little lower than the alternator. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 2/21/2013 by Vincent from AAP
Q:
whwre is the engine coolant termpure sensor is locate on a 2000 ford f150xlt 5.4 4x4Asked on 11/30/2012 by bear1 answer
CUSTOMER CARE
A:
The engine coolant temperature sensor should be located on the driver side head, near the front, under the intake manifold. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.Answered on 11/30/2012 by Steve from AAP
Q:
Would the blower work and send out cold air?Asked on 10/31/2012 by shelia from Courtland, AL1 answer
CUSTOMER CARE
A:
We would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.Answered on 11/1/2012 by Rick from AAP
Q:
Where is the Coolant Temperature Sensor located on a 1999 Navigator DOHC? and is this the same an a Cylinder Head Temperature (CHT)Sensor?Asked on 10/5/2012 by Drew from Huntsville, AL1 answer
CUSTOMER CARE
A:
If you follow the upper radiator hose to the engine, the coolant temperature sensor on your 1999 Lincoln Navigator should be screwed into the cooling hoses/manifolds. The cylinder head temperature sensor is different from the coolant temperature sensor. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.Answered on 10/7/2012 by Rick from AAP
Q:
where is coolant temp sensor located
on a 2002 Lincoln ls v8Asked on 6/7/2012 by chad1 answer
CUSTOMER CARE
A:
The Coolant temperature sensor on your 2002 Lincoln LS is located on the passenger side of the cylinder head, under the third intake port from the front in the valley of the engine. For any further assistance please feel free to call 1-877-238-2623 and one of our representatives will gladly assist you with any questions or concerns you may have.Answered on 6/9/2012 by John the Car-Doc from AAP
Q:
IS THIS SENSOR THE ONE THATS SENDS INFO TO THE TEMP. GUAGE ?Asked on 4/21/2012 by Anonymous1 answer
CUSTOMER CARE
A:
The coolant temperature sensor is used to measure the temperature of the engine coolant of an internal combustion engine. The readings from this sensor are then fed back to the Engine control unit (ECU). This data from the sensor is then used to adjust the fuel injection and ignition timing. The data may also be used to provide readings for a coolant temperature gauge on the dash.Answered on 4/22/2012 by Dennis from AAP
Q:
Where is the sensor located on a 2004 Ford F150 4.6 liter V8?Asked on 4/19/2012 by Anonymous1 answer
CUSTOMER CARE
A:
Follow the top radiator hose from the radiator to the engine on your Ford F150, where it ends is at the thermostat housing. Generally, Ford puts them within six inches of that location.Answered on 4/22/2012 by Vincent from AAP
Displaying questions 1-10Previous | Next »
Related / Similar Products
See full product details
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
