-
Your Store:
-
Hover over the image to zoom in
Related Categories
2004 Jeep Grand Cherokee Laredo Headlight Switch (part#S14221)
See if this part fits a specific vehicle.
Brand: BWD
Advance Auto Parts Part#: 19970295
Suitable vehicles: Click to find if this product can be used with your vehicle:
Advance Auto Parts Part#: 19970295
Suitable vehicles: Click to find if this product can be used with your vehicle:
- Jeep
- Grand Cherokee Laredo
- 2004
- 2004 Jeep Grand Cherokee Laredo (4.7L 285CI V8 FI VIN: J)
- 2004
- Grand Cherokee Laredo
BWD switches are manufactured to meet or exceed OE performance.
Back To Top
| Connector Gender: | Female |
REVIEWS
Reviewed by 2 customers
Sort by
Displaying reviews 1-2
Pros
- Easy To Use
Cons
Best Uses
Comments about BWD Combination Switch:
The combination switch is easy to install. Total time less than 15 minutes, including air bag capacitor bleedoff time. There is one small annoyance over the oem switch. The turn signal detent release lever produces a noticible click when the steering wheel is turned past the release cam, whereas the oem switch did not exhibit such click. For the price compared to the stealership cost, the annoyance is something I can put up with.
- Car & Truck:
- Mechanic, Truck Enthusiast
Pros
- Easy To Use
- Lightweight
Cons
Best Uses
- JEEP
Comments about BWD Combination Switch:
i think i have a faulty switch, my fogs lights only come on once in a while with the new switch. my old swtich they work everytime so i know its this new one. i put my old swtich back in and am not using the new one.
- Car & Truck:
- Auto Enthusiast, Truck Enthusiast
Displaying reviews 1-2
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
5 Questions | 5 Answers
Displaying questions 1-5
Q:
my turn signals suddenly stopped working indicators don't light flashers work whats the likely cause?Asked on 5/25/2012 by Anonymous1 answer
CUSTOMER CARE
A:
When diagnosing an electrical circuit, it is important to first make sure that the fuse and relay are working properly. The problem may be even with the flasher, turn signal switch, instrument cluster, the turn signal bulbs and sockets or circuit boards themselves. However, I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem.Answered on 5/25/2012 by Vincent from AAP
Q:
does this have the emergency flashers on itAsked on 12/22/2011 by chad from florence ky1 answer
CUSTOMER CARE
A:
This BWD Combination switch has 3 primary functions that is the high beams for the headlights, the headlights on and off switch running lights and the turn signals. It is referred to as a combination switch and it has to be service together as a combination unit, as assembly.Answered on 12/23/2011 by Vincent from AAP
Q:
will replacing this part solve a problem with when the headlights are turned on the running and brake lights don't work.Asked on 12/14/2011 by twogunswhitecalf from Roslindale, MA1 answer
CUSTOMER CARE
A:
You got a bad ground connection working there. Start by checking the grounds in the trunk, then make sure your grounding straps from the engine to chassis are there and that they are clean and tight. Plus, check the battery cables. It seems there is a loose ground wire supplying ground to some of the lights. Since the brake light works when head lights are off but not when they are on, the partial ground wasn't enough for all them to work at the same time.Answered on 12/14/2011 by John the Car-Doc from AAP
Q:
will replacing this part solve a problem with when the headlights are turned on the running and brake lights don't work.Asked on 12/14/2011 by twogunswhitecalf from Roslindale, MA1 answer
CUSTOMER CARE
A:
You got a bad ground connection working there. Start by checking the grounds in the trunk, then make sure your grounding straps from the engine to chassis are there and that they are clean and tight. Plus, check the battery cables. It seems there is a loose ground wire supplying ground to some of the lights. Since the brake light works when head lights are off but not when they are on, the partial ground wasn't enough for all them to work at the same time.Answered on 12/14/2011 by John the Car-Doc from AAP
Q:
I just ordered this part. It is my understanding that it will correct the problem with my turn signals and hazard indicators not working. Sometimes they do, most times they don't. Have I ordered the correct part?Asked on 2/14/2011 by Debbie from St. Albans, WV1 answer
CUSTOMER CARE
A:
The switch has 3 primary functions that is the high beams for the headlights, the headlights on and off switch running lights and the turn signals. It is referred to as a combination switch and it has to be service together as a combination unit, as assembly.Answered on 5/9/2011 by Just Ask Jacob! from AAP
Displaying questions 1-5
Related / Similar Products
See full product details
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
