-
Your Store:
-
Hover over the image to zoom in
Related Categories
1997 Ford Ranger Super Cab Heater Control Valve (part#74809)
See if this part fits a specific vehicle.
Brand: Factory Air
Advance Auto Parts Part#: 15490015
Suitable vehicles: Click to find if this product can be used with your vehicle:
Advance Auto Parts Part#: 15490015
Suitable vehicles: Click to find if this product can be used with your vehicle:
- Ford
- Ranger Super Cab
- 1997
- 1997 Ford Ranger Super Cab (4.0L 245CI V6 FI VIN: X)
- 1997
- Ranger Super Cab
Vacuum operated, bypass, closes, heater control valve
Back To Top
| Hose #1 Size: | .625 in |
| Hose #2 Size: | .625 in |
| Material: | Plastic |
| Quantity: | 1 |
| Type: | Vacuum Closes, Bypass |
REVIEW SNAPSHOT®
by PowerReviewsFactory AirValve
(based on 12 reviews)
Ratings Distribution
50%
of respondents would recommend this to a friend.
Pros
- Easy to install (7)
- Lightweight (4)
Cons
- No improvement in performance (3)
Best Uses
- Everyday driving (6)
- Replacement (5)
- Reviewer Profile:
- Auto enthusiast (3), Casual driver (3), Mechanic (3)
Most Liked Positive Review
Replacement part for my 97 Explorer
My truck couldn't run safely without this piece. We couldn't figure out why the radiator was always bone dry and the truck was always overheating. We found that the original piece was split and ...Read complete review
My truck couldn't run safely without this piece. We couldn't figure out why the radiator was always bone dry and the truck was always overheating. We found that the original piece was split and draining water every time the engine ran, so much that it would drain 3 gallons of water in less than 30 minutes. We got the replacement part, and after a 7 minute installation, the truck is running smoother and keeping the water where it belongs. This is a necessary piece, don't bother trying to fix the old one temporaroly, just get a new one that will work for a long while.
VS
Most Liked Negative Review
china mexico sub standard dont buy
replaced it 3 time's with 2 year period.... warranty is a laugh.....8:45 at night only place open to get part....so I can get to work in the ...Read complete review
replaced it 3 time's with 2 year period.... warranty is a laugh.....8:45 at night only place open to get part....so I can get to work in the morning..... sure it will leak again....after warannty runs out cheap cheap cheap......buy ford product it will last for years....
REVIEWS
Reviewed by 12 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
- Easy To Install
- Just like oem
- Lightweight
Cons
Best Uses
- Replacement
Comments about Factory Air Valve:
Fits just like an OEM.
Pros
- Durable
- Easy To Install
- Lightweight
Cons
- none
Best Uses
- Everyday Driving
- Performance Driving
- Replacement
Comments about Factory Air Valve:
My valve lost compression, and this replacement was what I needed. It is a perfect fit for my 98 Ford Ranger, and intallation was a breeze. My heat is hotter then ever now.
Pros
- Easy To Install
Cons
Best Uses
- Everyday Driving
Comments about Factory Air Valve:
This one lasted a year and a week! Just past the warranty period of 1 year! It's leakikng at the vacuum assembly, so you can't fix it, I'll have to buy another one. In an emergency, this will work fine or if you can't find one else where. I'm going to try another brand.
Pros
- Exact fit
- Price
Cons
- Poor Seal
Best Uses
Comments about Factory Air Valve:
The product is an exact fit for my 1997 Ford Ranger XLT V6 and looks identical to the original part. However, the part failed twice in less than one month. The first one began leaking 3 days after installation. The second began leaking 2 weeks after installation. In both cases, it leaked at the point where the metal valve shaft enters the housing. I decided to switch to Motorcraft OEM and found the part online for $24 shipped.
Pros
- Easy To Install
- Good fit
Cons
- Leaks
Best Uses
- Only In A Jam
Comments about Factory Air Valve:
this thing is junk. my OEM one lasted 14 years, i put this on the truck and it lasted 1 month. started to leak from the arm and drop coolant on to the exhaust manifold. replaced it under warranty. this one has lasted about 6 weeks and it's leaking from the same place. i wouldn't recommend getting this, buy it elsewhere. will be returning tomorrow for a refund.
Pros
- Easy To Install
- Lightweight
Cons
- No Improvement In Performance
Best Uses
- Everyday Driving
- Replacement
Comments about Factory Air Valve:
This part is a replacement for my original one. My vehicle is 10 yrs old and Advance Auto Parts has had all the parts that needed replacement so far in stock. No need to wait for a part to arrive a week later. Also with the ease of ordering on line and the discount code offered right on top of the page I'll continue shopping online.
Pros
Cons
- No Improvement In Performance
Best Uses
Comments about Factory Air Valve:
3 n 7 months first leaked after 2 days the other two broke at weld
Comments about Factory Air Valve:
I replaced this unit twice. 1st within 1 yr.warranty. The second one lasted about 2 yrs. But it blew apart on highway and lost all coolant within seconds. The valve looked like it exploded. [*]. Not worth buying at any price. Motorcraft can be purchased at the same price. Save yourself money and grief, do not buy this brand. [*]
Pros
- Not leaking
Cons
- Should have hose routing
Best Uses
- Replacement
Comments about Factory Air Valve:
fit like a glove
Pros
- Easy To Install
Cons
Best Uses
- Everyday Driving
Comments about Factory Air Valve:
Works as it should
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
10 Questions | 13 Answers
Displaying questions 1-10
Q:
do i have to replace the heat control valve or can i simply bypass it?Asked on 5/11/2012 by Anonymous1 answer
CUSTOMER CARE
A:
The hoses are simply connected to the stock one. You can remove it and reconnect them to the new control valve. For any further assistance, please call us toll free at: 1-877-ADVANCE (238-2623) and one of our representative would be glad to assist you further.Answered on 5/13/2012 by John the Car-Doc from AAP
Q:
what size hose fits this partAsked on 1/9/2012 by Anonymous1 answer
CUSTOMER CARE
A:
Below is the Factory air valve hose size
Hose #1 Size:.625 in
Hose #2 Size:.625 inAnswered on 1/11/2012 by Steve from AAP
Q:
07 Ranger with no heat. AC works fan works when switched to heat no heat. Was told it was the acuator valve. Is this the same valve?Asked on 12/8/2011 by mudman from North Carolina1 answer
CUSTOMER CARE
A:
Yes, this is the heater control valve. In order to check the exact fit application, please provide the sub model of the vehicle.Answered on 12/8/2011 by Vincent from AAP
Q:
I owned a 1996 Ford Ranger XL extended cab. Engine size 2.3
A reputable auto care company told me I needed to replace this part asap. It will cost me a lot for parts and labor. I am not a mechanic but would like to do it myself. How difficult is it to replace this part? Does it require disconnecting a lot of things under the hood? Will I lose all of the antifreeze when I replace the value? The car place told me I needed to do get a coolant system service done immediately after I replace the valve. installed.
Asked on 8/7/2011 by AnonymousAsked on 8/9/2011 by Anonymous2 answers
CUSTOMER CARE
A:
For help with your project, I recommend purchasing a Haynes repair manual specifically for your vehicle. This should be able to assist you further into detail on how to repair or replace specific parts.Answered on 8/11/2011 by Steve from AAPA:
On my Ranger with a 3.0 engine all that is needed is to unclamp 4 hoses, and install the part. You may lose a small amount of antifreeze while installing the valve but this should only amount to about a cup or so out of about a gallon which can then v=be easily replaced. Replace the valve as not doing so will cause you to lose a large amount of antifreeze and could possibly lead to other problems. As far as having a coolant service done afterwards, only if you are due for that service in your regular maintenance, or if the leak persists.Answered on 11/8/2011 by Steve from Muncie
Q:
A reputable auto care company told me I needed to replace this part asap. It will cost me a lot for parts and labor. I am not a mechanic but would like to do it myself. How difficult is it to replace this part? Does it require disconnecting a lot of things under the hood? Will I lose all of the antifreeze when I replace the value? The car place told me I needed to do get a coolant system service done immediately after I replace the valve. installed.Asked on 8/7/2011 by Anonymous2 answers
A:
no they are really easyAnswered on 5/6/2012 by RDH0418@yahoo.com from Aurora, COCUSTOMER CARE
A:
If you could please provide the year, make, model and engine size of the vehicle and we would be better able to assist you.Answered on 8/9/2011 by Steve from AAP
Q:
can this be hooked up the wrong way ?Asked on 1/9/2011 by TZ from Atlanta GA2 answers
CUSTOMER CARE
A:
I'm pretty sure it can be having four connection locationsAnswered on 1/11/2011 by Mike the Auto Parts Master from AAPCUSTOMER CARE
A:
Yes, this can possibly be hooked up the wrong way. I would recommend purchasing a Haynes repair manual specifically for your vehicle. This should be able to assist you further into detail on how to repair or replace specific parts.Answered on 1/11/2011 by Ron the Auto Parts Rebel from AAP
Q:
my temperature control switch stays on cold will not switch to heat has a clicking noise under dash what could be problem when you turn switch to the heat sideAsked on 11/26/2010 by george from drummonds tn1 answer
CUSTOMER CARE
A:
With out the presence of your vehicle we would not be able to properly diagnose it nor provide you with a 100% answer. We would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not solve or be the problem.Answered on 12/1/2010 by Ron the Auto Parts Rebel from AAP
Q:
Where is this part located? I have a 95 3.0LAsked on 10/3/2010 by buddy from salem,ct1 answer
CUSTOMER CARE
A:
For further assistance, please provide the make and model of your vehicle.Answered on 10/4/2010 by Mike the master of auto parts from AAP
Q:
where does the vacume line hoke to this valve, because I replace this valve on my truck because I was not getting any heat inside now I am getting to much heat inside I cannot turn it down with the heat control knob.Asked on 3/30/2010 by Jimmy from Clinton North Carolina1 answer
A:
The vacuum line connects to the round can on the right side of the valve. Be sure nothing is interfering with the actuator arm on the valve that would not allow it to move, or it could be a bad vacuum line or heat control knob in the truck.Answered on 4/28/2010 by Dennis from IN
Q:
will this item keep you from having heat inside the vehicle?Asked on 12/12/2009 by mule from quincy illinois1 answer
CUSTOMER CARE
A:
Yes this heater control valve could keep you from having heat inside the vehicle if it is bad.Answered on 2/4/2010 by Kevin from AAP
Displaying questions 1-10
Related / Similar Products
1997 Ford Ranger Super Cab Heater Core (part#398341)
Part No. 18820060
See full product details
:;
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
