-
Your Store:
-
Hover over the image to zoom in
Related Categories
2001 Dodge Grand Caravan ES Remanufactured Water Pump (part#58-585)
See if this part fits a specific vehicle.
Brand: Driveworks
Advance Auto Parts Part#: 20420583
Suitable vehicles: Click to find if this product can be used with your vehicle:
Advance Auto Parts Part#: 20420583
Suitable vehicles: Click to find if this product can be used with your vehicle:
- Dodge
- Grand Caravan ES
- 2001
- 2001 Dodge Grand Caravan ES (3.8L 230CI V6 FI VIN: L)
- 2001
- Grand Caravan ES
Product Features:
Back To Top
- 100% leak tested and hub-pull tested to promote a long, trouble-free performance life
- Designed and manufactured with new, high-quality unitized seals from OE suppliers to ensure long, trouble-free performance
- Each unit uses the proper bearing design as specified by the OE manufacturer to meet the specific radial torque and axial load requirements of each application to promote long bearing life and trouble-free performance
- Supplied with high-quality mounting gasket and other seals/gaskets as applicable per application to help complete the job
- Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
REVIEW SNAPSHOT®
by PowerReviewsDriveworksRemanufactured Water Pump
(based on 2 reviews)
Ratings Distribution
REVIEWS
Reviewed by 2 customers
Sort by
Displaying reviews 1-2
Pros
- Easy To Install
Cons
Best Uses
- Everyday Driving
Comments about Driveworks Remanufactured Water Pump:
Took more work to get the old one out than getting the new one in. But, it's done and seems to be holding up just fine, so far.
- Car & Truck:
- Casual Driver
Pros
- Easy To Install
Cons
Best Uses
- Everyday Driving
Comments about Driveworks Remanufactured Water Pump:
None
- Car & Truck:
- Casual Driver
Displaying reviews 1-2
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
3 Questions | 5 Answers
Displaying questions 1-3
Q:
I have 2002 dodge caravan with a bad water pump. It seems to be very tight in the engine compartment. does the water pump replacement require for the engine to be lifted?Asked on 4/6/2013 by atlhandyman from ellenwood ga.1 answer
CUSTOMER CARE
A:
Instructions to replace the water pump: First you loosen, but not remove the pulley bolts and then remove your belt. Next you will have to remove the pulley bolts, rotate the pulley and let it fall down in between the pump body and the pump hub. Next remove the water pump bolts. You will have to work around the pump pulley which makes it a bit difficult, but not impossible. Then, remove the water pump with the pulley still hanging from the shaft. There is not enough clearance to remove the pulley separately, it must be removed with the pump. Clean the mating surface where the seal mates with the engine, install the new seal onto the new pump (use just a little bit of gasket sealant to hold the seal in place if needed, but don't go crazy with it). Put the pulley onto the new pump, but let it hang from the shaft. Install the new pump bolts and reposition the pulley back onto the end of the pump, install the pulley bolts. Install the belt and tighten the pulley bolts. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 4/8/2013 by Steve from AAP
Q:
I have a 2005 Dodge Grand Caravan...know nothing about cars...need to know parts I need to purchase for water pump replacement and radiator replacement...hoping to buy parts cheaper directly and then pay for labor only at a shopAsked on 12/5/2011 by David Don't Know It from Wake Forest, NC1 answer
CUSTOMER CARE
A:
Yes, this Driveworks Remanufactured Water Pump (Part No. 58-585) fits your 2005 Dodge Grand Caravan and the radiator for your vehicle is Ready-Rad Radiator (Part No. 433993).Answered on 12/5/2011 by Dennis from AAP
Q:
do i have to lift the engine to change the waterpump?Asked on 3/12/2011 by Anonymous3 answers
A:
There is a slot in the pulley that the allows the pump to collapse to pass the frame. Loosen the pulley bolts before removing the belt. Take out the bolts in the housing and then the bolts in the pulley. So no lifting is required. At most the engine may need to be pried back about an 1/8" to pass the frame using say a wood 2x4 on the Harmonic balancer. This will not hurt the Engine Mounts. This is how I have done it.Answered on 2/7/2013 by roboengr from Tulsa, OKA:
The Hayes manual never mentions having to lift the engine, but as I found out, it's not possible to remove the pully and pump without lifting it. I used a floor jack with a piece of wood for protection. I got the jack just firm under the engine, unbolted the motor mount, and then raised the engine about a half inch, which is all the clearance you'll need.Answered on 9/28/2012 by Jimmy from Cleveland, OHCUSTOMER CARE
A:
I would recommend purchasing a Haynes repair manual for your vehicle. This will have many of the locations of parts needed for a variety of repairs.Answered on 3/14/2011 by Parts Guru Geo from AAP
Displaying questions 1-3
Related / Similar Products
See full product details
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
