-
Your Store:
-
| Design: | Single |
| Wall: | Double |
| Degree: | 0 |
| Pipe Compatibility (in.): | 2.15 |
| Inlet Diameter (in.): | 2.25 |
| Outlet Diameter (in.): | 4.75 |
| Height (in.): | 4.75 |
| Width (in.): | 4.75 |
| Length (in.): | 16.25 |
REVIEW SNAPSHOT®
by PowerReviewsPros
Cons
Best Uses
REVIEWS
Reviewed by 5 customers
Sort by
Displaying reviews 1-5
Pros
Cons
Best Uses
Comments about 3A Racing Universal Stainless Steel Muffler - Slant Tip - 2.25" Inlet Diameter:
Ive been building V-8s for quite some time and yes a muffler can make a decent noticeable gain not a lot but some depending if you got the right one for your vehicle. I have never dealt with 4 cyl performance but I recently purchased a 96 Geo Prizm same as the toyota corrolla with a 1.6L DOHC for commuting for 600 bucks everything worked even the ac. It seemed weak even for a standard and really quiet and smooth does not come with a Tach either and yes i can feel when its time to change gears, however i wanted a little sound not a lot and this 3a muffler was the only one on the shelf and i wasnt waiting in line again for someone to go and get a different one for me. I came home cut the stock one off and put on the new one. It sounded great not loud and abnoxious or tin can but nice. i went for a drive and got a huge awesome for instance the car at cruising 70 mph the rpms sounded a little high like 4000 or so. well anyways with the free flow muffler on this car it was like adding 50 to 75 HP to a V8. It ran fast which kinda amazed me now i kinda understand that a little HP in a tuner goes a long way it even gave me longer rpms through each gear got up to 90 and the RPMS were lower then with the stock at 70mph. Remember that each car is different free flow straight pipes or exhaust mostly V8s may increase HP in some but some vehicles need back pressure to run at there peak.
Pros
Cons
Best Uses
Comments about 3A Racing Universal Stainless Steel Muffler - Slant Tip - 2.25" Inlet Diameter:
i bought this muffler and like it. easy to install and great sound for cheap.
Pros
Cons
Best Uses
Comments about 3A Racing Universal Stainless Steel Muffler - Slant Tip - 2.25" Inlet Diameter:
i have this on my ford ranger pick up truck and sounds good. i would tell a friend to buy this cause its cheap and easy to install. and sounds nic insted of spending a bunch of money on an exhaust syster if its just for sound and show
Pros
Cons
Best Uses
Comments about 3A Racing Universal Stainless Steel Muffler - Slant Tip - 2.25" Inlet Diameter:
i bought mine 6 months ago. it startet to rust within a few weeks. so i painted it looked pretty good. ive been pulled over a few times because of its loudness. cops say it illegal.
Pros
Cons
Best Uses
Comments about 3A Racing Universal Stainless Steel Muffler - Slant Tip - 2.25" Inlet Diameter:
Installed this 3A racer stainless steel muffler 3 weeks ago and it is already rusty
Displaying reviews 1-5
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
Q:
how would this sound on a 1995 ford explorer sport 6 cylinder?1 answer
CUSTOMER CARE
A:
The sound produced from 3A Racing Universal Stainless Steel Muffler - Slant Tip - 2.25" Inlet Diameter (Part No. 63-0542) when installed in a 1995 Ford Explorer is pretty loud. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.Q:
I have a 01 kia spectra 5 speed will this exhaust burn oil and eat my engine??? is it leagal in maine??1 answer
CUSTOMER CARE
A:
This should not bother your engine at all. I do not know if it is legal in the state of Maine. You need to check with your local storeQ:
I HAVE A 1996 NEON AND WAS WONDERIN WHAT OTHER PARTS I WOULD HAVE TO BUY TO INSTALL THIS MUFFLER?1 answer
CUSTOMER CARE
A:
It depends on how you plan to install it. If you plan on welding it in place, you will most likely have to have some hangers fabricated or welded in place. If you plan on clamping it on, then you will need the hangers and the clamp.Q:
will this pass inspection in new york state???1 answer
CUSTOMER CARE
A:
It should depending on your noise pollution laws.Q:
will it fit my 02 chevy cavalier..and make it sound good?1 answer
CUSTOMER CARE
A:
I have personally heard these mufflers before and in my personal opinion, I think that they are very loud and obnoxious.Q:
will this fit a 98 nissan altima and how you install it1 answer
CUSTOMER CARE
A:
you may have to get an adapter part to mate the pipe with the stock exhaust but it dose sound good.Q:
I have a 07 cobalt ls 5 speed. Will it replace the stock muffler easily?1 answer
CUSTOMER CARE
A:
It will have to be welded on.Q:
Will the 3a Racing Muffler Fit a 1991 Honda Accord Ex. 4 door.. And does it sound good?1 answer
CUSTOMER CARE
A:
You should be able to fit this onto your Honda but in my opinion of the 3A mufflers that I have heard, they sound pretty ridiculous and annoying.Q:
Does it sound cheap?1 answer
CUSTOMER CARE
A:
I have personally heard these mufflers before and in my personal opinion, I think that they are very loud and obnoxious.Q:
i have a 93 geo prizm will this 3a muffler fit and how will my car sound and will it increase horse power1 answer
CUSTOMER CARE
A:
Without knowing your vehicle or the diameter of your exhaust piping, all I can say is that you may need an adapter for the muffler to weld up to your current exhaust. Your vehicle will, in my opinion, will sound loud and obnoxious and will most likely not increase the horsepower enough to feel.