-
Your Store:
-
Hover over the image to zoom in
Related Categories
2006 - 2007 Chevrolet Cobalt LS Extra Guard Oil Filter (part#CH9018)
See if this part fits a specific vehicle.
Brand: Fram
Advance Auto Parts Part#: 5140006
Suitable vehicles: Click to find if this product can be used with your vehicle:
Advance Auto Parts Part#: 5140006
Suitable vehicles: Click to find if this product can be used with your vehicle:
- Chevrolet
- Cobalt LS
- 2007
- 2007 Chevrolet Cobalt LS (2.2L 134CI L4 FI VIN: F - L61)
- 2006
- 2006 Chevrolet Cobalt LS (2.2L 134CI L4 FI VIN: F - L61)
- 2007
- Cobalt LS
FRAM Extra Guard Oil Filters use cellulose and synthetic glass blended media to promote enhanced engine protection. FRAM's engine protection ratings are based on the filter's ability not to just trap dirt but to hold it for the life of the filter.
Product Features:
Back To Top
Product Features:
- Rated at 95% dirt-trapping efficiency
| Height: | 3.5 in |
| Inside Diameter: | 1.39" (One End) |
| Outside Diameter: | 2.52 in |
REVIEW SNAPSHOT®
by PowerReviewsFramExtra Guard Oil Filter
(based on 5 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
Pros
- Easy to use (5)
- Lightweight (4)
- Durable (3)
Cons
Best Uses
- Small cars (4)
- Was this a gift?:
- No (4)
REVIEWS
Reviewed by 5 customers
Sort by
Displaying reviews 1-5
Pros
- Durable
- Easy To Use
Cons
Best Uses
- Small Cars
- Trucks
Comments about Fram Extra Guard Oil Filter:
serves its purpose
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
- Lightweight
Cons
Best Uses
- Small Cars
Comments about Fram Extra Guard Oil Filter:
Seems to be a well built oil filter. Looked and fit good when it was installed. Oil seems to be staying clean.
- Was this a gift?:
- No
Pros
- Easy to install
- Easy To Use
- Lightweight
Cons
Best Uses
- Trucks
Comments about Fram Extra Guard Oil Filter:
Sticking with something I think works well
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
- High-Performance
- Lightweight
Cons
Best Uses
- Small Cars
Comments about Fram Extra Guard Oil Filter:
Seems to be a well built oil filter. Looked and fit good when it was installed. Oil seems to be staying clean.
- Was this a gift?:
- No
Pros
- Easy To Use
- High-Performance
- Lightweight
Cons
Best Uses
- Small Cars
Comments about Fram Extra Guard Oil Filter:
Fram filters are rated pretty high in effectiveness so I only use them in either tough gourd or extra guard.
- Car & Truck:
- Casual Driver
Displaying reviews 1-5
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
7 Questions | 8 Answers
Displaying questions 1-7
Q:
on my wifes 2012 equionix the website shows a cartridge type filter vs a spin on type.Is this correct? If so when did GM switch to this style of filter? I used to use this style years ago on large truck engines!! Why the change back to the cartridge style? Do you have to change/check the gasket on the housing that holds the cartridge? Are these gaskets available? Thanks for any help !!!!Asked on 1/5/2012 by Anonymous from liverpool ny1 answer
CUSTOMER CARE
A:
Yes, the Fram Extra Guard Oil Filter with part number CH9018 fits the 2012 Chevrolet Equinox 2.4L F/inj. (16V) DOHC Flex fuel LEA K. However at the same time it is not compatible with other engine models of Equinox. It seems GM is using this particular type only for the above mentioned Equinox. For more information we request you to call us toll free at: 1-877-ADVANCE (238-2623) and we would be more than happy to assist you.Answered on 1/10/2012 by John the Car-Doc from AAP
Q:
Where is the filter assembly located on a 2003 Chey Cavalier - have the filter - never change a filter of this typeAsked on 6/7/2011 by Jen a do-it-yourselfer from Groton, CT1 answer
CUSTOMER CARE
A:
The oil filter is a cartridge type, and is located on the engine block. If you are standing in front of the vehicle it is near the middle of the engine bay, it is located down and to the right of the intake manifold. You may need to remove the engine cover, which is done by removing the oil cap and then pulling upward on the entire cover.Answered on 6/7/2011 by DIY Daniel from AAP
Q:
I got a 2005 Classic with 2.2 motor and I want to know where the filter is and how to change it?Asked on 12/20/2010 by Anonymous1 answer
CUSTOMER CARE
A:
I recommend purchasing a Haynes repair manual specifically for your vehicle. This should be able to assist you further into detail on how to repair or replace specific parts.Answered on 12/21/2010 by Ron the Auto Parts Rebel from AAP
Q:
where is the cannister located for this filterAsked on 12/18/2010 by kat c from blue ridge ga1 answer
CUSTOMER CARE
A:
In order for us to further assist you would you please provide us with the year, make, model, and engine size of your application?Answered on 12/19/2010 by Ron the Auto Parts Rebel from AAP
Q:
Where is the location of oil filter?Asked on 5/10/2010 by Anonymous2 answers
CUSTOMER CARE
A:
To further assist you on this question can you please provide us with your vehicles year, make, model, and engine size. thank You.Answered on 5/10/2010 by Mike from AAPCUSTOMER CARE
A:
To further assist you on this question can you please provide us with your vehicles year, make, model, and engine size. thank You.Answered on 5/10/2010 by Mike from AAP
Q:
I cannot locate the canister to replace the oil filter element.
Any help would be appreciated.Asked on 5/6/2010 by Bluedawg from Mayetta, KS1 answer
CUSTOMER CARE
A:
To further assist you on this question can you please provide us with your vehicles year, make, model, and engine size. thank You.Answered on 5/6/2010 by Kevin from AAP
Q:
how difficult is this filter to changeAsked on 5/4/2010 by Anonymous from russellsprings ky1 answer
CUSTOMER CARE
A:
To change out this filter, all you should really need is a ratchet, long extension, and a socket big enough to fit the head of the cap. Once you unscrew it, take the old filter out, replace the o-ring gasket, replace the filter with the new one, and screw back in. Be sure to get the cap back tight, but do not over tighten it.Answered on 5/4/2010 by Mike from AAP
Displaying questions 1-7
Related / Similar Products
See full product details
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
