-
Your Store:
-
Hover over the image to zoom in
Related Categories
2004 Ford Freestar SE Ball Bearing (part#5106-WCC)
See if this part fits a specific vehicle.
Brand: National
Advance Auto Parts Part#: 3274470
Suitable vehicles: Click to find if this product can be used with your vehicle:
Advance Auto Parts Part#: 3274470
Suitable vehicles: Click to find if this product can be used with your vehicle:
- Ford
- Freestar SE
- 2004
- 2004 Ford Freestar SE (3.9L 238CI V6 FI VIN: 6)
- 2004
- Freestar SE
Designed to provide enhanced endurance and maximum contamination exclusion while ensuring proper fit, form and function.
Back To Top
| Bearing Type: | Radial Ball Bearings |
| Inner Diameter: | 1.1811 in |
| Outer Diameter: | 2.1654 in |
| Width: | 0.9063 in |
REVIEW SNAPSHOT®
by PowerReviewsNationalBall Bearing
(based on 3 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
REVIEWS
Reviewed by 3 customers
Sort by
Displaying reviews 1-3
Pros
- Durable
- Easy To Install
- Great product
Cons
Best Uses
- Everyday Driving
- Replacement
Comments about National Ball Bearing:
FORD ESCAPE WAS MAKE A LOUD SQUEAKING NOISE, SOUNDED LIEK A BELT OR TENSIONER , BUT WAS ACTUALLY A FAILE D BEARING ON THE A/C CLUTCH. ADVANCE HAD THE PART , BUT TOOK THE SALES REP A FEW MINUTES TO FIND ON THE SHELF. ACTALLY DID THE REPAIR WITH THE A/C ON THE CAR , AND WITHOUT A PRESS . JUST CAREFULLY KNOCKED IT OUT AND DROVE IT IN OFF THE CAR .
Pros
- Durable
- Easy To Install
Cons
Best Uses
Comments about National Ball Bearing:
quality replacement part.
Comments about National Ball Bearing:
This is a standard A/C Clutch Bearing for Ford and other models. The listing didn't give me the size so I added it it the Headline 30 x 55 x 22mm this is the industry standard replacement. My original unit was a NSK 30BD400U and lasted 161K beefore starting to squeal.To change it remove the clutch front plate, remove the retaining snap ring hoding the pully assembly. Then gently tap the pulley from behind with a plastic mallet, gently. Finally press the bearing out of the pulley assembly and reinstall the new one. Stake the bearing assebly back in like the origional. Reassemble the clutch on the pump. Found it a bit cheaper elsewhere. Hope that helps...
Displaying reviews 1-3
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
5 Questions | 5 Answers
Displaying questions 1-5
Q:
I have a 2001 ranger edge and a/c quit cooling and compressor bearing is sqealling, can that cause loss of freon and if replace bearing would that seal up compressor where i think the leak isAsked on 7/4/2012 by jack of trade from birmingham al1 answer
CUSTOMER CARE
A:
No, you can very easily replace the bearing without any loss of Freon. However you will have to check with a professional if it is only the bearing which is to be replaced or the whole clutch assembly. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.Answered on 7/9/2012 by John the Car-Doc from AAP
Q:
My 2000 Ford Ranger, V6 3.0 Cylinder is making a whining, noise, thought it might have been the water pump, but it wasnt. Is bearing considered also as the AC Bearing, because I have had several people tell me that they believe that the AC bearing is going out, and I just wanted to make sure of this product before purchasing!!Asked on 2/8/2012 by Anonymous from South Carolina1 answer
CUSTOMER CARE
A:
Yes, this part National Ball Bearing, Part No. 5106-WCC manufactured by National fits your 2000 Ford Ranger. The specification of the part: Ball Bearing; Bore=1.1811", Outer Diameter=2.1654", Width=0.9063". However, I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem.Answered on 2/9/2012 by Aaron from AAP
Q:
ac pulley has slight wobble and squeal does this keep clutch from engaging properly and cooling vehicle also if turn on ac my v8 feels like i have a 4 cylinder 2003 crown vic police.Asked on 11/10/2011 by jim from wesley chapel fl.1 answer
CUSTOMER CARE
A:
It's most likely the ball bearings for the AC Compressor pulley. They are fairy easy to replace. Remove the drive belt, hold the clutch with a screwdriver or a clutch holding tool and remove the center bolt. Remove the clutch and then use a 3 jaw gear puller to remove the bearing. Installation is the reverse.Answered on 11/12/2011 by John the Car-Doc from AAP
Q:
a/c pully is squealing. can i replace the bearings? And is it difficult to do?Asked on 5/20/2010 by macco1 answer
CUSTOMER CARE
A:
Yes you could replace the pulley bearing to stop the squealing.Answered on 7/9/2010 by Kevin from AAP
Q:
Hey guys I have a problem w/ my a/c here in FL. The A/c pulley assembly has a wooble. If I replace the bearing will that get rid of the wooble for some much need a/c? and can I make the repair here at home?Asked on 4/5/2010 by auto monkey from jax fl1 answer
CUSTOMER CARE
A:
Replacing the bearing could stop the wobble. It might also be the pulley.Answered on 4/30/2010 by Kevin from AAP
Displaying questions 1-5
Related / Similar Products
2004 Ford Freestar SE Sway Bar Link Kit (part#K5334)
Part No. 20516137
See full product details
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
