2001 Mazda Tribute DEX III/M Automatic Transmission Fluid (1 qt.) (part#A100)

A:

With reference to your inquiry on the Advance Auto Parts DEX III/M Automatic Transmission Fluid (1 qt.) -part# A100, on your 2001 Chevy Cavalier for a bottom pan removal, you would need 6.5 litres (6.9 quarts) and for complete overhaul 9.0 litres (9.5 quarts). For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

A:

With reference to your inquiry on the Advance Auto Parts DEX III/M Automatic Transmission Fluid (1 qt.) - part# A100, 7 1/2 U.S. quarts is the transmission fluid capacity of a 2002 Nissan Sentra with the 1.8 liter engine. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

A:

Instructions to drain automatic transmission fluid and replace filter: 1. Park the Explorer on a level surface, such as the garage or the street. Place wheel chocks in front of and behind one of the rear wheels. 2. Place the jack under the front frame cross member and lift your Explorer far enough that you can fit comfortably underneath it. 3. Place the jack stands on either side of the jack and carefully lower the vehicle onto the stands. 4. Slide the drain pan umbrella on the drain pan and slide it under the truck behind the transmission. Place the tools under the truck where they are easily accessible. Slide under the vehicle to here you can easily reach all of the bolts on the transmission pan. 5. Loosen the transmission pan bolts by rotating them counterclockwise. Remove three bolts from one corner, leaving the rest of the bolts in to hold the pan when you loosen it. 6. Slide the drain pan with the umbrella under the transmission pan. 7. Insert the tip of the screwdriver between the pan and the transmission case in the corner you removed the bolts from. Twist the screwdriver to break the seal of the gasket. Adjust the drain pan to ensure that the fluid is caught in the umbrella. 8. Hold the pan with one hand to keep it from falling. Remove the remaining bolts working away from the corner. Pour the remaining fluid into the pan. 9. Slide out from under the truck, bringing the transmission pan with you. 10. Clean the inside of the transmission pan with the parts cleaner spray. Wipe any residue from the pan with the rags. Scrape the gasket from the mating surface of the pan. 11. Slide the clean pan and new gasket and filter under the truck where you can reach them. Slide back under the truck. 12. Remove the gasket remnants from the transmission case using the gasket scraper. 13. Remove the old filter from the valve body using the 3/8 socket, by rotating the bolts counterclockwise. 14. Pull the old filter off the valve body and set it in the drain pan umbrella. Line the filter up with the bolt holes and insert the bolts through the holes and rotate them clockwise finger tight. Tighten the bolts to 20 to 30 foot-pounds using the ratchet. 15. Place the pan gasket on the pan and use four of the bolts to hold the gasket in place. Lift the pan into place against the transmission case. Rotate the bolts clockwise to tighten them finger tight. Insert and tighten the remaining bolts. 16. Tighten the bolts to approximately 30 foot-pounds using the ratchet. 17. Slide the oil drain pan out from under the truck, being careful not to spill. Slide out from under the truck, bringing the tools with you. 18. Open the hood. Remove the transmission dipstick and insert the transmission funnel into the dipstick tube. 19. Pour 4 quarts of transmission fluid into the funnel carefully. Remove the funnel and reinsert the dipstick. 20. Start the truck and cycle the transmission through the gears, keeping the shift lever in each gear for about 5 seconds before shifting to the next gear. Put the transmission in Park and check the fluid level. Add fluid as necessary to bring the level to full. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.

A:

Honda manufacturer recommends the use of Honda Premium Automatic Transmission Fluid (ATF) in all models except those equipped with a Continuously Variable Transmission (CVT). This Advance Auto Parts DEX III/M Automatic Transmission Fluid (1 qt.) (Part# A100) should work fine with your 1996 Honda Civic as it is applicable with 4L60-E, Advance Multi-Vehicle ATF, 5 Quarts Service Change, 11.2 Quarts and 4L80-E, Advance Multi-Vehicle ATF, 7.7 Quarts Service Change, 13.5 Quarts. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

A:

You will need 11.9 to 12.1 quarts of this Advance Auto Parts DEX III/M Automatic Transmission Fluid (1 qt.) (Part# A100) for a complete flush and fill. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

A:

It is recommended to drain and replace the transmission fluid. The dipstick is toward the driver’s side of the engine compartment. It is a red plastic handle. You should either check the fluid level when the transmission is fully cold or fully hot (i.e. has been driven several miles) as the dipstick is marked for both conditions. If you have a standard shift transaxle, you must raise the car up on a level lift. You will see a big 15/16" plug, also on the driver's side, but on the bottom front of the transmission. You may need to remove 1 or 2 --10mm bolts to access the fill plug. For any further assistance please feel free to call 1-877-238-2623 and one of our representatives will gladly assist you with any questions or concerns you may have.

A:

This Automatic Transmission Fluid with part# A100 is formulated for older model Ford and General Motors vehicles and is suitable for transmissions requiring MERCON, DEXRON-I, DEXRON-II and DEXRON-III automatic transmission fluid. This Automatic Transmission Fluid is not for use in transmissions that specify MERCON V, MERCON SP, DEXRON-VI or Type F.

A:

Yes, this Advance Auto Parts DEX III/M Automatic Transmission Fluid with part#  A100 fits your 1996 Geo Metro with 1.3l engine.

A:

For a simple drain and fill, it will need 5 quarts. For a complete flush and fill, it will need 11.9 to 12.1 quarts. When you get to that last quart, hold up adding more then start the engine and run it through the gears, shut down the engine and add the last quart.

A:

The required information regarding the D-4 light flashing in your 1993 Honda accord 2.2 has been sent to the mail address provided.