-
Your Store:
-
Hover over the image to zoom in
Related Categories
2002 - 2005 Ford Explorer Universal Joint (part#2-4800BF)
See if this part fits a specific vehicle.
Brand: Brute Force
Advance Auto Parts Part#: 5270251
Suitable vehicles: Click to find if this product can be used with your vehicle:
Advance Auto Parts Part#: 5270251
Suitable vehicles: Click to find if this product can be used with your vehicle:
- Ford
- Explorer
- 2005
- 2005 Ford Explorer (4.6L 281CI V8 FI VIN: W)
- 2004
- 2004 Ford Explorer (4.6L 281CI V8 FI VIN: W)
- 2003
- 2003 Ford Explorer (4.6L 281CI V8 FI VIN: W)
- 2002
- 2002 Ford Explorer (4.6L 281CI V8 FI VIN: W)
- 2005
- Explorer
Universal Joint - Brute Force
Back To Top
| Bearing Cap Diameter 1: | 1.063 |
| Bearing Cap Diameter 2: | 1.063 |
| Bearing Type: | 1.063 |
| Lock-Up Dimension 1: | 3.622 |
| Lock-Up Dimension 2: | 3.622 |
| Lube Fitting: | No |
REVIEW SNAPSHOT®
by PowerReviewsBrute ForceUniversal Joint
(based on 3 reviews)
Ratings Distribution
67%
of respondents would recommend this to a friend.
Pros
Cons
Best Uses
- Trucks (3)
REVIEWS
Reviewed by 3 customers
Sort by
Displaying reviews 1-3
Pros
Cons
- Incompatible
Best Uses
- Trucks
Comments about Brute Force Universal Joint:
This Universal joint does not fit a 1989 F-150 xlt Lariat 4WD. The caps are to large to fit the forward side yoke. I made three trips to Advance Auto, finally matching with a Universal Joint for a 1982 by their book. I highly recommend you take the old Joints with you when purchasing new ones and save yourself time and gas money and turning a simple job into an all day project. The rear side Joint was an exact match by the book and computer... go figure. All shafts and yokes are the original factory on this truck..
- Car & Truck:
- Truck Enthusiast
Pros
- Durable
- Easy To Use
- High-Performance
- Strong
- Well made
Cons
Best Uses
- Large Cars
- Small Cars
- Trucks
Comments about Brute Force Universal Joint:
Very strong and heavy duty U joints. No grease fittings because they are heavy duty and a grease fitting hole would make them weaker.
- Car & Truck:
- Mechanic
Pros
- Durable
- Easy To Use
Cons
Best Uses
- Large Cars
- Small Cars
- Trucks
Comments about Brute Force Universal Joint:
I was a little skeptical of the brand before i purchased them. i had a broken u-joint on the front drive shaft of my 1998 Ford Expedition that resulted in a a clank noise and terrible vibrations while driving. Dropped the front drive shaft and changed both u-joints (highly recommend changing all the u-joints on your drive shaft front or rear while you have it off). Bolted front drive shaft back on, took truck for a spin and smooth ride was back and no more clanking. So far these Brute Force U-joints have been holding up!
- Car & Truck:
- Auto Enthusiast, Mechanic, Truck Enthusiast
Displaying reviews 1-3
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
5 Questions | 5 Answers
Displaying questions 1-5
Q:
can i use my factory hardware to mount these 1995 Mercury Grand Marquis?Asked on 8/26/2011 by Mcastel368 from Fort Lauderdale, FL1 answer
CUSTOMER CARE
A:
Yes, you should be able to use the factory hardware to mount this part on your vehicle but slight modifications may be required.Answered on 8/26/2011 by Dennis from AAP
Q:
this u-joint fit both side (back,front)Asked on 3/18/2011 by Anonymous1 answer
CUSTOMER CARE
A:
Yes, it will fit for both front and rear.Answered on 3/19/2011 by Parts Guru Geo from AAP
Q:
why is it so easy to replace the front u-joint and not the back one .Asked on 5/1/2010 by chawk rigs from aiken,sc1 answer
A:
because you do not have the proper tool. the u-joints are incredibly easy to replace when you have the proper tool to press them out of the yoke.Answered on 6/24/2010 by Karl from Moyock, NC
Q:
Does this have a grease fitting on it?Asked on 12/28/2009 by Brian from Key Wesy, FL1 answer
CUSTOMER CARE
A:
This U-Joint is sealed and does not have a grease fitting on it.Answered on 12/28/2009 by Mike from Advance Auto Parts
Q:
Where is this made? Cannot use Chinese garbage.Asked on 11/18/2009 by Ed from Long Beach NY1 answer
CUSTOMER CARE
A:
U-Joint itself is made in USA. The clips are made in China.Answered on 11/18/2009 by Rob from Advance Auto Parts
Displaying questions 1-5
Related / Similar Products
2002 - 2005 Ford Explorer Ball Joint (part#K8695T)
Part No. 20517131
See full product details
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
