Radiator to Fuel Injector O-Ring Set

Our radiators are designed and tested to meet or exceed OE specifications for form, fit, and function. Using premium quality materials and a clear focus on the highest heat transfer performance possible, our engineers have designed this radiator to perform at the highest standards to ensure optimal cooling.

Bosch Premium Oxygen Sensors with OE SmartLink™ provide the closest match to the original equipment manufacturer's sensor performance. Each sensor is manufactured with a 2' length of sensor wire to allow for maximum replacement of worn wire.

Bosch Premium Oxygen Sensors with OE SmartLink™ provide the closest match to the original equipment manufacturer's sensor performance. Each sensor is manufactured with a 2' length of sensor wire to allow for maximum replacement of worn wire.

Direct OE replacement. Engineered to OE specifications for both materials and dimensions. No machining required.

The PCV valve is one half of the crankcase ventilation system - the other half is the breather filter. The breather flows clean air into the crankcase through a hose on your air filter and the PCV valve lets dirty air and crankcase gases out. These dirty gases and air get sent through the engine to be re-burned for clean emissions. An old PCV valve can cause rough engine idle, blown oil seals, fouled air filter and fuel system, fumes in the passenger compartment, excessive engine part wear, and shorter oil life. Although the PCV is not a pollution control valve, a worn out PCV valve can contribute to air pollution. So, it’s important to change your PCV valve for the safety of your vehicle - and the environment!

Product Features:

• Lets dirty air and crankcase gases out

A direct OE replacement. Made of materials engineered to OE specifications. Helps in maintaining proper operation of the vehicles emissions system and vehicle performance.

Purolator Classic Air Filter; 96.5% efficiency; provides enhanced protection to help improve performance and fuel efficiency; meets or exceeds OEM specifications.

Designed to meet the increasing demands of today's engines. Each of our oxygen sensors is constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each Denso sensor.

NTK Oxygen Sensors meet OE specifications for form, fit and function and have a direct-fit, OEM-style connector for installation.

Designed to provide enhanced endurance and maximum contamination exclusion while ensuring proper fit, form and function.

Designed to provide enhanced endurance and maximum contamination exclusion while ensuring proper fit, form and function.

Beck/Arnley Oil Filters capture harmful contaminates and stop them from causing premature wear to internal engine parts. Bypass valves and anti-drain back valves provide extra protection and safety and are included where applicable.

Air, Fuel, Emission & Exhaust > Fuel & Oil Filters > Oil Filter Components

Air, Fuel, Emission & Exhaust > Fuel & Oil Filters > Oil Filter Components

From the leader in aftermarket engine sealing, FEL-PRO the gaskets professionals trust.

Product Features:

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

All ToughOne axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.

Product Features:

• 100% New Axle
• Quality Engineered for Superior Durability
• Tested for Reliable Performance
• No Core Exchange

BWD switches are manufactured to meet or exceed OE performance.

This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a "quick connect" end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation.

Do it yourself, from simple maintenance to basic repairs, with a Haynes manual. Each Haynes book is based on a complete teardown of the vehicle and features clear instructions and hundreds of photographs that show each step. This book covers Mitsubishi Eclipse ''95-''05 and Eagle Talon ''95-''98.

Product Features:

• Step-by-step procedures
• Easy-to-follow photos
• Complete troubleshooting section
• Valuable shortcuts
• Color spark plug diagnosis

Sylvania Long Life miniature bulbs are built to provide a long working life. Designed for durability, low maintenance and enhanced safety.

Product Features:

• Legal for on-road use
• OE quality
• Lights dim over time
• Replace lights in pairs

Rain-X Latitude Windshield Wiper Blades offer great visibility in rain, sleet and snow. Use on either originally-installed standard or curved-style Windshield Wiper Blades. The Rain-X Latitude® blade is sold with a preinstalled small j-hook adapter and contains multi-adapter for side pin, large j-hook and bayonet windshield wiper blade arms.

Rain-X Latitude Windshield Wiper Blades feature a contoured design that applies even pressure along the entire windshield wiper blade length. The windshield wiper blade is made of specially blended graphite coated rubber that delivers a smooth, clean, chatter-free wipe with each pass of the wiper blade. WIth a built-in aerodynamic spoiler, drag, noise, and wind lift are significantly reduced.

The ice resistant frame helps to prevent snow and ice build-up by eliminating exposed metal components. The rubber-encased substructure helps to increase wiper flexibility and adherence to the windshield in harsh conditions.

Product Features:

• Easy Installation
• High-Performance Wipe
• Ice Resistant Frame

OE-style long-life spark plug; laser-welded platinum ground and center electrodes; requires less voltage; features increased anti-fouling characteristics; enhanced acceleration; designed for high fuel efficiency and lower emissions.

Product Features:

• Recommended for modern vehicles using distributorless ignition systems (DIS) for maximum plug service life

Castrol Import Multi-Vehicle Automatic Transmission Fluid is specially designed from a technologically advanced multi-vehicle formula that does not have the limitations of a traditional DEXRON®-III/MERCON® multi-vehicle formulation. Castrol Import Multi-Vehicle ATF exceeds the requirements of the JASO-1A performance standard created by Japanese Automobile Manufacturers. This standard is recognized by Japanese OEMs in certifying ATF for use in their vehicles. Furthermore, while Castrol Import Multi-Vehicle ATF is designed to meet the demanding requirements of many foreign transmissions, it also meets the requirements of many domestic vehicles as well. This includes many DaimlerChrysler, General Motors, and Ford vehicles. Castrol Import Multi-Vehicle ATF is fully licensed and approved under Ford MERCON® V.

Product Features:

• Enhanced friction durability for smooth transmission performance
• Exceptional high-temperature protection to effectively resist fluid oxidation
• Superb low-temperature fluidity for cold-weather shifting

Serrated stainless-steel terminals virtually eliminate corrosion for long wire life and are manufactured to meet OEM specifications for proper fit, form and function. High temperature-resistant silicone and EPDM rubber jacket or EPDM rubber outer jacket protect against chemicals and abrasion.

BWD idle air control valves are manufactured to meet or exceed OE performance.

From the leader in aftermarket engine sealing, FEL-PRO the gaskets professionals trust.

Product Features:

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

All Bosch Fuel Pumps conform to an "OE or greater" standard for fit, form and function. This means you get a long-lasting, high-performing pump that fits right the first time.

From the leader in aftermarket engine sealing, FEL-PRO the gaskets professionals trust.

Product Features:

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted