Brake Hose Washer - ID 10.3mm, OD 16.91mm, Thickness 1.2mm to A/C Hose

Recommended for replacement every time the brake hose is removed from the brake caliper, Dorman’s Brake Hose to Caliper Bolt Washer fends off rust, corrosion, and leaks, the most common effects of exposure to harsh road conditions. Dorman offers a full range of replacement parts and repair solutions, including brake bleeder screws and brake hose bolts, for your convenience.

Product Features:

• Precision made to help ensure a proper fit and seal
• High-quality brass or copper construction ensures durability
• Available in various sizes for use on a multitude of vehicles
• Easy replacement

Dorman offers a line of Brake Hydraulic Hose to Caliper Bolts for a range of applications. All our Brake Hydraulic Hose to Caliper Bolts are constructed of high-quality materials for long-lasting durability.

Product Features:

• Available in a range of thread sizes and lengths
• Conveniently packaged in a variety of piece counts to assist with both small and large projects
• Direct replacement (where applicable) for a proper fit
• Comes with washers (where applicable)

This brake hardware is manufactured to replace used, weakened hardware. Replacing the hardware will help ensure safer stops and longer friction life.

Wearever Brake Drums are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and balance that eliminates noise and enhances pedal feel. Wearever Brake Drums are designed to dissipate heat helping to eliminate brake fade and increase the life of your brake shoes. Ready to install out of the box to save you time.

Product Features:

• Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
• Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
• OE design to dissipate heat, increasing brake shoe life.
• Proper harmonic design and balance helps to reduce brake noise.
• Optimal metallurgy and casting thickness to preventing warping
• Ready for immediate "out-of-the-box" installation (after cleaning)
  
  Advance Auto Parts Drum Tips:

  • Recommended using Wearever Brake Clean to remove residual manufacturing oils prior to installation.
  • Always use a torque wrench to tighten wheel bolts to the manufacturers'' specifications to prevent pedal pulsation.
  • Always replace drums in pairs to improve stopping power.

Wagner Brake has been engineering and manufacturing drums for decades. This heritage provides the foundation for Federal-Mogul's ability to engineer high-quality drums and certify that they deliver safe, effective performance when used in today's vehicles.

Eliminate the replacement of costly steering knuckles--as well as time spent drilling, tapping or rethreading the mounting holes--with Dorman’s Disc Brake Caliper Bolt Kit. The bolts are precisely engineered to tighten into stripped holes, providing a quick and easy repair. Detailed instructions are included with each package.

Product Features:

• Save time, money and labor by replacing only the Disc Brake Caliper Bolt-instead of the entire caliper bracket or knuckle
• Many different sizes available
• Available in a variety of piece counts for both small and large projects
• Pre-coated with thread lock to prevent loosening

Easy, straightforward and fast. Engineered with a built-in check valve that eliminates the need for specialized equipment, Dorman’s Brake Bleeder Screw lightens the task of releasing air and fluid from the brake system. What’s more, thread sealant is already applied, fortifying the screw against corrosion and securing it in place.

Product Features:

• Saves time and money by accomplishing the same function as special pressure or vacuum equipment
• Stainless, brass and zinc-coated to powerfully resist corrosion and stripping
• Direct replacement for a proper fit every time
• Universal application

Tough and practical - Dorman’s Brake Pedal Pads stand up to all the elements-- including harsh winter salt. Their true value, however, lies in safety: made of hardened rubber and ridged to stop shoes from slipping, they can be counted on to withstand continual wear and tear.

Product Features:

• Easy installation-just slip the pad onto the brake pedal
• Weather-resistant
• Direct replacement for proper fit
• Pedal pads can also be used on clutch (where applicable)

Dorman’s Body Mount Kit includes all the components needed for a complete repair. Quickly and easily installed, it eliminates the clunking noise that may result when this part fails, while restoring original ride control.

Product Features:

• Comes with all necessary installation hardware
• High quality rubber construction resists compression, cracking, and separating
• Direct replacement for a proper fit every time
• Quality tested to ensure trouble-free performance and durability

Dayco is a leader in research and design, manufacturing and distributing of a broad range of belts, hose, tensioners and pulleys for the automotive, trucking, construction, agricultural and industrial markets.

Recognized by both the original equipment and the automotive aftermarket as an innovative, technologically driven organization, Dayco operates a fully integrated global network of technical facilities and sales offices employing a workforce of nearly 3,100. Dayco continues to be guided by the same primary business strategy established over 100 years ago: to anticipate and satisfy the needs of our customers by providing timely, quality products and services.

Autocraft Gold automotive batteries are engineered for maximum starting power in any climate. That means you can relax knowing you'll get your car started, even on the coldest of days. Autocraft Gold automotive batteries meet or exceed the manufacturers power (CCA) requirements for your vehicle, ensuring you get the power you need for a quick start every time.

Product Features:

• Engineered with PowerFrame positive grid technology which virtually eliminates premature failure and resists corrosion up to 66% more effectively than other grid designs.
• PowerFrame provides superior starting performance over the life of the battery with up to 70% better electrical flow than other grid technologies.
• PowerFrame manufacturing process uses 20% less energy and releases 20% fewer greenhouse gas emissions than other manufacturing methods.
• Built to meet or exceed vehicle starting power requirements
• Maintenance free for maximum convenience
• 3 year free replacement warranty

MOOG Problem Solver products incorporate proven design and engineering features to ensure like new steering, ease of installation and longer life. MOOG is the preferred steering and suspension parts brand of professional technicians and NASCAR Crew Chiefs.

Product Features:

• Problem Solver® powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
• MOOG® engineered steel composition results in a stronger component.
• Full ball metal stud provides 360 degrees of smooth, consistent, rotational movement resulting in more responsive steering.
• Belleville washer preload provides lower torque and stud articulation with minimal axial clearance.
• Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.
• Polyurethane boot offers durability and resistance to extreme temperatures.

MOOG Problem Solver products incorporate proven design and engineering features to ensure like new steering, ease of installation and longer life. MOOG is the preferred steering and suspension parts brand of professional technicians and NASCAR Crew Chiefs.

Product Features:

• Problem Solver® powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
• Problem Solver® patented cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life part.
• Exclusive cover plate protects against contaminants leaking into the bearing surface.
• An enlarged ball joint receptacle in the lower control arm can cause a loose ball joint fit. MOOG® Problem Solver® design includes an oversized housing for a more secure fit.
• Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.

Designed to provide enhanced endurance and maximum contamination exclusion while ensuring proper fit, form and function.

BWD relays are manufactured to meet or exceed OE performance

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Provides OE-quality filtration. Driveworks gaskets are designed to keep your pan gasket in place during installation. Includes trilingual instructions.

BWD transmission control solenoids are manufactured to meet or exceed OE performance.

Restore the anti-lock brake system to safe, proper operation with Dorman’s Anti-Lock Brake System Wheel Speed Sensor. It’s engineered from high quality materials to provide years of service. Plus, it comes with all the necessary installation hardware for a complete repair.

Product Features:

• Effectively transmits the vehicle’s wheel speed through the harness, back to the anti-lock brake system control module
• Direct replacement for a proper fit every time
• Easy to install
• Quality tested to ensure long-lasting performance

General Motors Antenna Adapter 88-07. GM factory antenna with mini barbed or barbless plug to aftermarket radio.

Product Features:

• GM antenna adapter
• Factory antenna with mini barbed or barbless plug

This alternator has been computer load tested and mechanically and visually inspected. Designed, manufactured and assembled to promote improved long-term reliability.

This temperature sensor's design specifies tight tolerance thermistor response valves to help ensure accurate temperature measurements and promote proper part operation.

Replacement schrader valve and fitting caps

Factory Air switches meet or exceed original equipment specifications.

Factory Air switches meet or exceed original equipment specifications.

Factory Air Relays are designed to meet or exceed original equipment specifications.

Cooling & Heating > AC Clutches & Compressors > AC Compressors

ToughOne Accumulators are designed to meet or exceed original equipment specifications.

As a basic manufacturer, BWD has complete control of the manufacturing process from component to finished product. BWD ABS sensor line has over 1,500 numbers with complete coverage for domestic and import applications.

ACDelco is a global leader in automotive replacement parts and related services and offers quality aftermarket products for most makes and models, including General Motors, Ford, Chrysler, Toyota and Honda, plus many original equipment service replacement parts. ACDelco products can be found in more than 100 countries located on six of the seven continents and are sourced globally to meet the needs of the local markets, including "maintenance" parts commonly replaced during the lifetime of a vehicle (e.g., batteries, oil filters, air filters, wiper blades, shocks and brakes), as well as "repair" parts (e.g., alternators, radiators, chassis and heating/cooling components). ACDelco offers more than 80,000 parts across 37 product lines.

ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and Aftersales, a division of General Motors. ACDelco employs a two- or three-tiered distribution model, utilizing a network of appointed wholesale distributors to service independent installers, ACDelco independent service centers, retail and fleet customers.