Suspension Ball Joint to Mercon® V Automatic Transmission Fluid (1 Qt.)

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

• Forged housing provides exceptional strength and durability
• Oxidation film on the surface of the metal protects against corrosion
• Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
• Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination

Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle's safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include*: Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat. (*as applicable by OE design)

Product Features:

• Replacing all your warn strut components ensures a complete repair
• High-Quality premium strut components
• Engineered for superior fit and performance
• Monroe Strut-Mate mounting kits* include: Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat.
• * Each kit sold separately

Heavy-duty construction and unique design features make the Monroe Strut-Mate boot kit the quality choice for maximum rod protection and improved strut life. Damaged boots may not protect the rod finish. A pitted piston rod can lead to premature strut failure. Deteriorated OE bumpers may not offer adequate protection from severe suspension movement, leading to premature strut failure.

Product Features:

• Tie-Strap: Secures new boot to strut housing.
• Self Draining Design: Eliminates retention of moisture and other unwanted contaminants.
• Unique Boot Bumper Attachment Method: Simplifies installation.
• Boot: Provides rod protection from rust and corrosion enhancing service life.
• Soft Entry Jounce Bumper: Constructed of highest quality closed cell micro-cellular urethane for maximum durability, helps prevent severe impacts.

Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle's safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include*: Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat. (*as applicable by OE design)

Product Features:

• Replacing all your warn strut components ensures a complete repair
• High-Quality premium strut components
• Engineered for superior fit and performance
• Monroe Strut-Mate mounting kits* include: Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat.
• * Each kit sold separately

Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle's safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include*: Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat. (*as applicable by OE design)

Product Features:

• Replacing all your warn strut components ensures a complete repair
• High-Quality premium strut components
• Engineered for superior fit and performance
• Monroe Strut-Mate mounting kits* include: Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat.
• * Each kit sold separately

MOOG Problem Solver products incorporate proven design and engineering features to ensure like new steering, ease of installation and longer life. MOOG is the preferred steering and suspension parts brand of professional technicians and NASCAR Crew Chiefs.

Product Features:

• Thermoplastic bushings are resistant to heat, wear, salt, road grime and oils.

ProMotive oil filters offer engine protection that meets or exceeds OE requirements

Provides a center wire platinum firing tip. Benefits include reduced gap erosion, fewer misfires, enhanced performance and improved durability.

Product Features:

• OE Approved
• Platinum ball on the center electrode helps minimize gap erosion for longer life
• Platinum ball welding process provides a consistent point of contact for enhanced adhesion
• Designed for fewer misfires and reduced gap erosion
• Works to optimize engine performance and provide improved fuel economy

The bright, white SilverStar bulb offers up to 30% brighter light, up to 20% whiter light and up to 10% farther- and wider-reaching visibility.

Product Features:

• Legal for on-road use
• OE quality
• Lights dim over time
• Replace lights in pairs

The bright, white SilverStar bulb offers up to 30% brighter light, up to 20% whiter light and up to 10% farther- and wider-reaching visibility.

Product Features:

• Legal for on-road use
• OE quality
• Lights dim over time
• Replace lights in pairs

The bright, white SilverStar bulb offers up to 35% brighter light, up to 30% more down-road visibility and up to 35% more side-road visibility.

Product Features:

• Legal for on-road use
• OE quality
• Lights dim over time
• Replace lights in pairs
• Made in the USA
• High-performance design can result in a product life that is less than that of a standard lamp

The Monroe Sensa-Trac strut with PSD (position sensitive damping) and the Safe Tech system combines our exclusive precision tapered grooves in the pressure tube with application engineered valving and Fluon banded piston to improve the ride, handling, and safety characteristics of the vehicle. These features allow the Monroe Sensa-Trac strut to adjust more rapidly to changing road and weight conditions than any other available shock absorber.

Product Features:

• All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
• Rod Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
• Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
• Unique Groove Tube - PSD: Precision tapered grooves in the pressure tube perform like an additional stage of valving for optimum ride tuning.
• Hardened and Chrome Plated Piston Rod: Long service life.
• Unique Rod Guide and Single Lip Seal: Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance.
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
• Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

The Monroe Sensa-Trac passenger car shock absorber with PSD (position sensitive damping) and the Safe Tech system combines our exclusive precision tapered grooves in the pressure tube with application engineered valving and Fluon banded piston to improve the ride, handling, and safety characteristics of the vehicle. These features allow the Monroe Sensa-Trac passenger car shock absorber to adjust more rapidly to changing road and weight conditions than any other available shock absorber.

Product Features:

• All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
• Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
• Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
• 1-3/16" Bore: Larger bore than most shocks to provide more efficient and consistent control.
• Unique Groove Tube - PSD: Precision tapered grooves in the pressure tube perform like an additional stage of valving for optimum ride tuning.
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
• 1/2" Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
• Special Seal: "Self-lubricating" fluid seal designed to retain gas without excessive wear or friction.

The Rack and Pinion gear set is a simple mechanism that enables you to efficiently steer your car. You’ll find the pinion gear at the end of the steering shaft. Once the steering wheel turns, this gear spins and moves the rack, which turns the wheels. The shafts on which the rack and pinion are attached meet OEM specifications; premium-quality bearings help to deliver a smoother steering experience. Valve housing has polished micro-finish sleeving for durability. OEM-grade O-rings and seals meet required specifications. Factory computer-tested.

Product Features :

• Micro-Finish sleeving of valve housing
• Factory Computerized-tested for safety
• OE-grade Seals and O-rings
• Premium OE quality bearing
• Centreless polished shafts

The revolutionary Monroe Quick-Strut unit is the first complete, ready-to-install replacement strut assembly available! Monroe Quick-Strut units include all the components required for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement bearing plate, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each Quick-Strut assembly features application-engineered valving to optimize each vehicle's unique ride and handling characteristics. Available for popular passenger car, light truck and SUV applications.

Product Features:

• Pre-Assembled Upper Strut Mount: OE-style bearings, SAE-grade nuts and bolts, Superior rubber-to-steel bonding, Plated steel for longer wear, All components manufactured to meet or exceed OE performance
• Bearing Plate: The new bearing plate helps ensure consistent, precise steering return by eliminating “memory steer.” Helps eliminate steering noises commonly associated with worn or corroded bearings. Also improves overall steering smoothness (if equipped - front only)
• Upper Spring Seat: Each new spring seat is engineered to complement the ride control characteristic of the corresponding premium Monroe strut and upper strut mount. The upper spring seat provides consistent performance without transmitting noise or vibration into the chassis. Also supports the vehicle’s weight and helps properly offset the spring in the strut tower.
• Coil Spring: Manufactured from high-quality U.S. steel, each coil spring is precisely calibrated to support the vehicle’s weight and help ensure correct ride height. Each spring is painted or powder-coated for excellent rust resistance
• Boot Kit: The durable strut boot protects the strut rod and seal from dirt and debris. The premium bumper prevents component damage when the suspension bottoms out
• Spring Isolators: Prevents metal to metal contact and helps eliminate noise between the spring and spring seat
• Premium Strut: Premium strut technology based on application. Each strut features application-engineered valving to complement each vehicle's unique ride and handling characteristics

Ultra high power spark plug replacement with over 1 million watts of patented ignition power. Our Sparks Plugs create precise timing and ignition for improved performance/fuel economy/emissions. Platinum tip promotes cleaner burning.

Product Features:

• Ultra High Power Spark Plug Replacement
• Over 1 Million Watts Of Patented Ignition Power
• Creates Precise Timing And Ignition
• Fast Growing Flame Kernel
• Improved Performance/Fuel Economy/Emissions
• Platinum Tip Promotes Cleaner Burning
• OE Replacement For Platinum Tipped Spark Plugs
• Lifetime Warranty

Bosch ceramic technology affords best-in-class performance. The ceramic element is a critical part of any oxygen sensor. Bosch's patented materials and processes are your assurance of unparalleled quality and performance.

Dorman's Window Regulators have been re-engineered to improve on the original design. The latest technological advances in motors, materials and cable systems have been applied to new and previously released applications.

Product Features:

• Engineered improvements enhance performance
• Quality tested to ensure trouble free installation, performance, and durability
• Plug & Play – No wire splicing necessary
• Features Anti-Pinch technology (where applicable) – Safety feature reduces risk to passengers

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

Brake Cables are responsible for application of the parking or emergency brake. When failure occurs, Brake Cables need to be replaced for the vehicle to pass state inspections. Tru-Torque Brake Cables are direct replacements parts.

Product Features:

• Inner cables are sheathed and lubricated to provide longer life and improved performance
• Flexible casings are completely covered with conduit to prevent corrosion of interior cables
• Zinc plated fittings and clips prevent corrosion
• Brackets included where applicable

Dependable braking at an economical price

Value-priced seal meets all cataloged application requirements.

Designed to provide enhanced endurance and maximum contamination exclusion while ensuring proper fit, form and function.

Looking for a quality filter but watching your wallet? A Purolator Classic oil filter provides maximum protection against harmful contaminants getting into your engine, and costs a little less than a Purolator PureONE oil filter. For low-mileage or highway driving, a Purolator Classic oil filter is the oil filter of choice. Purolator Classic Oil Filters are 97.5% Efficient* With an efficiency rating of 97.5%, just slightly lower than a Purolator PureONE oil filter, you can be assured that a Purolator Classic oil filter provides premium protection for every day driving.

Product Features:

• Multi-fiber, high density media filters out harmful contaminants.
• Internally lubricated Nitrile gasket requires less torque for filter removal.
• Anti-drainback valve minimizes engine dry start.

Routine Maintenance > Filters > Oil Filters

All ToughOne axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.

Product Features:

• 100% New Axle
• Quality Engineered for Superior Durability
• Tested for Reliable Performance
• No Core Exchange

This part is molded rubber bonded to steel and made to meet or exceed OE specifications for form, fit and function.

Product Features:

• Steel stampings made to exact dimensions and gauge
• Molded rubber made of SBR material to provide proper dampening of vibration

Advance Auto Parts MERCON® V Automatic Transmission Fluid is formulated for all Ford cars and light trucks requiring MERCON® or MERCON® V automatic transmission fluid.

Product Features:

• Formulated for all Ford cars and light trucks requiring MERCON® or MERCON® V automatic transmission fluid
• Provides smooth shifting performance and protects against slippage
• Not for use in transmissions that specify MERCON® SP or Type F