Brake Rotor to Ceramic Brake Pads - Front (4-Pad Set)

Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time.

Product Features:

• Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
• Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
• OE vane configuration to dissipate heat, increasing pad life.
• Proper harmonic design helps to reduce brake noise.
• Non-directional finish for less break-in time and reduced brake noise.
• Ready for immediate "out-of-the-box" installation (after cleaning)
  
  Advance Auto Parts Rotor Tips:

  • Recommend using Wearever Brake Clean to remove residual manufacturing oils prior to installation.
  • Always use a torque wrench to tighten wheel bolts to the manufacturers'' specifications to prevent pedal pulsation.
  • Always replace rotors in pairs to improve stopping power.

100% environmental, endurance and end-of-line testing for signal amplitude and polarity ensures consistent product reliability and performance.

Featuring a corrosion resistant coating to help prevent rusting, Dorman’s Differential Cover is engineered for long-lasting protection of the differential. Designed as a direct replacement, a proper fit is assured every time.

Product Features:

• Comes with pre-installed magnet in cover
• Fiberglass composite gasket included (where applicable)
• Includes high quality rubber fill plug (where applicable)
• Constructed from durable stamped steel

When it comes to your wheels, don’t take chances. Dorman’s Wheel Studs are produced to strict engineering quality standards. Our engineers design these parts with tight tolerance on specific part characteristics to ensure proper fit and function, this design provides assurance your wheels will be tight every time they are removed and installed.

Product Features:

• Direct replacement for a proper fit every time
• Corrosion resistant
• Double-ended studs as well as serrated bolts, and wheel bolts available
• Over-length and under-length studs available for convenience and ease of installation

The Imperial Maxi-Cool® XL's plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

• Imperial Maxi-Cool® plate and fin transmission cooler
• Size: 3/4" x 11" x 7-1/2"
• Mid-size and full-size cars, pickups
• GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:

• Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
• Direct replacement for a trouble-free installation
• Steel, iron or aluminum construction ensures durability
• Powder-coated or painted for long-lasting rust and corrosion resistance

BWD relays are manufactured to meet or exceed OE performance

From the leader in aftermarket engine sealing, FEL-PRO the gaskets professionals trust.

Product Features:

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

This brake hardware is manufactured to replace used, weakened hardware. Replacing the hardware will help ensure safer stops and a long performance life.

The bright, white SilverStar bulb offers up to 35% brighter light, up to 30% more down-road visibility and up to 35% more side-road visibility.

Product Features:

• Legal for on-road use
• OE quality
• Lights dim over time
• Replace lights in pairs
• Made in the USA
• High-performance design can result in a product life that is less than that of a standard lamp

Air, Fuel, Emission & Exhaust > Fuel Pumps & Tanks > Gas Caps

Durability-tested at 15,000V, 248°F and 50Hz for 300 hours. Voltage and heat shock tests are performed to withstand a minimum of 300 hours. Premium materials and construction for maximum service life.

As a basic manufacturer, BWD has complete control of the manufacturing process from component to finished product. The BWD ABS sensor line has over 1,500 numbers with complete coverage for domestic and import applications.

The Rack and Pinion gear set is a simple mechanism that enables you to efficiently steer your car. You’ll find the pinion gear at the end of the steering shaft. Once the steering wheel turns, this gear spins and moves the rack, which turns the wheels. The shafts on which the rack and pinion are attached meet OEM specifications; premium-quality bearings help to deliver a smoother steering experience. Valve housing has polished micro-finish sleeving for durability. OEM-grade O-rings and seals meet required specifications. Factory computer-tested.

Product Features :

• Micro-Finish sleeving of valve housing
• Factory Computerized-tested for safety
• OE-grade Seals and O-rings
• Premium OE quality bearing
• Centreless polished shafts

The Mobil1 Extended Performance Oil Filter utilizes synthetic fibers to leave your vehicle with cleaner oil and an engine that performs better and lasts longer. When used with Mobil 1 fully synthetic motor oil, this filter offers dependable protection for your engine.

Product Features:

• Designed for today's longer service intervals
• Advanced synthetic fiber-blend filter media for enhanced contaminant removal
• High-capacity design stores an increased amount of contaminants
• Reduces resistance to oil flow while improving filter efficiency
• Withstands up to 5x the normal system operating pressure

Dorman’s Disc Brake Caliper Bracket Mounting Bolts come in a variety of sizes and are suitable for a range of applications. All our Mounting Bolts are constructed from high-quality materials for a long service life.

Product Features:

• Pre-coated with thread lock to prevent loosening
• Direct replacement for a proper fit every time
• Durable steel design
• Easy to install

Original Equipment Replacement Wires / Complete COP Boot Set - 2

Product Features:

• Original Equipment Replacement Wires / Complete COP Boot Set - 2
• DENSO First Time Fit ignition wire sets are identical in form, fit, color, and performance to the factory-installed wire sets
• Every part the wire set's construction meets or exceeds OE/OES specifications
• Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
• Identical OE end caps are designed to "click" in place for a secure fit, allowing the installer to "feel and hear" that a solid connection has been made, even when the connection is in a difficult-to-see location
• Through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

Batteries, Electrical & Wiring > Battery Components & Tools > Battery Cables

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

• Forged housing from specific materials provides strength and durability to prevent breakage
• Coated technology provides a smooth and durable surface to prevent corrosion and rust
• Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
• A slotted nut and cotter pin for a more secure installation

Universal Joint - Brute Force

As a basic manufacturer, BWD has complete control of the manufacturing process from component to finished product. BWD ABS sensor line has over 1,500 numbers with complete coverage for domestic and import applications.

Standard replacement steel drive shaft. 8.75" length by 5/16" hex. Hardened at both ends.

An axle disc hardware kit with pins (upper/lower or inner/outer) that the caliper slides on. Replace old, corroded pins and bolts that can hamper caliper movement and cause unnecessary and uneven pad wear.

Airtex tank seals are made of advanced polymers that stand up to modern multi-fuel blends and retain elasticity to provide a positive seal and protect against leaks and contamination.

Product Features:

• Unique polymeric formula for life-long elasticity and superior performance with today's harsh fuel blends
• Superior seal for optimum performance and contamination protection

Wearever Gold brake pads are premium original equipment style replacement brake pads. Either Ceramic or Semi-Metallic depending your vehicles original equipment, Wearever Gold Brake Pads deliver superior stopping power and feature Advance Auto Part's exclusive multi-layer SoundLock noise dampening shim for ultra-quiet braking. Backed with a Limited Lifetime Warranty, Wearever Gold brake pads will provide the reliable stopping and performance you are looking for!

Product Features:

• Ceramic or semi-metallic OE replacement pads deliver superior stopping power
• Slots and chamfers match OE design for reliable performance
• Exclusive, multi-layer SoundLock shim provides ultra-quiet braking
• Limited Lifetime Warranty