Chrome Acorn Set 2-Piece M12-1.50, Hex 13/16 Inch Length 1.406 Inch to Chrome Std. Mag 2-Piece M12-1.50, Hex 13/16 Inch Length 1.668 Inch

• Constructed of high-quality steel
• Resistant to rust, warping, and stripping
• Multiple lock designs available
• Quality-tested to ensure performance and durability

• Constructed of high-quality steel
• Resistant to rust, warping, and stripping
• Also available in sets
• Multiple lock designs available

• Duplicates factory performance and provides OE steering feel and road shock absorption

• Allows adjustment range from negative 1 to 1 degree.

• All Wheel Cylinders are made with high quality EPDM rubber cups and boots for long lasting performance
• Wheel Cylinder bores are surface tested to ensure an optimum sealing surface for the pressure cups
• Due to repair time and cost, it is more desirable to replace instead of repair Wheel Cylinders
• Recommended replacement is suggested when servicing drum brake

• OE quality
• First Time Fit
• Performance tested

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. All KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal & bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a polyfoam travel-limiting bumper. It’s designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

• Keep leak-causing contaminants away from polished strut shaft
• Protects upper seal and bushing
• Prevents the strut from bottoming out
• Built with design and quality that matches or exceeds OE

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

• Wheel nut covers also available
• Easy to install
• Available in different quantities and packaging options
• Chrome wheel nut & lock kits available (where applicable)

• Reads And Erases Diagnostic Trouble Codes (DTCs)
• Tests HP/Torque And Performance
• Internet Updateable
• Transferable to Any Applicable Vehicle Application
• Easy To Use Capacitive Touch Buttons
• Full Color LCD

• All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
• Rod Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
• Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
• Unique Groove Tube - PSD: Precision tapered grooves in the pressure tube perform like an additional stage of valving for optimum ride tuning.
• Hardened and Chrome Plated Piston Rod: Long service life.
• Unique Rod Guide and Single Lip Seal: Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance.
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
• Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

• Same part installed when the engine rolled off the assembly line
• Designed to deliver quick starts, enhanced fuel economy and smooth acceleration

ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and Aftersales, a division of General Motors. ACDelco employs a two- or three-tiered distribution model, utilizing a network of appointed wholesale distributors to service independent installers, ACDelco independent service centers, retail and fleet customers.

• Wheel nut covers also available
• Easy to install
• Available in different quantities and packaging options
• Chrome wheel nut & lock kits available (where applicable)

Ride Comfort is important, but restoring a vehicle’s Ride Control; stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks & Struts are designed for the most important performance purpose: Restore the vehicle’s original capabilities. KYB is the world’s largest supplier of shocks and struts to new vehicle manufacturers. The Excel-G is made on the same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That earned Excel-G this classification: OEA (Original Equipment for the Aftermarket ). The KYB Excel-G is a Nitrogen gas-charged twin-tube design that includes every quality component that our global OEM products include.

Product Features:

• A seamless working cylinder vs. welded seams provides the best sealing surface throughout the entire piston stroke
• Precision multi-stage hydraulic valves that reduces fluid travel to minimize aeration and are calibrated the way OE intended the vehicle to perform
• Triple chrome-plated piston rod and multi-lip oil seals that reduce wear
• Solid, seamless mounting eye rings and bolt bushings that can’t separate and become noisy
• Chemically bonded insulator mounting bushings that won’t slip out
• A Teflon coated or phenolic piston band that reduces friction and provides a positive cylinder seal
• Specially formulated hydraulic fluid with multi-range viscosity for any weather climate

• Iridium-enhanced center electrode for improved durability and wear resistance
• .6 mm finewire design improves ignitability
• V-trimmed platinum sidewire technology resists wear
• OE form, fit and function
• Designed for better overall durability with virtually no gap erosion

• Constructed of high-quality steel
• Resistant to rust, warping, and stripping
• Multiple lock designs available
• Quality-tested to ensure performance and durability