Parking Brake Cable to Ball Joint

Brake Cables are responsible for application of the parking or emergency brake. When failure occurs, Brake Cables need to be replaced for the vehicle to pass state inspections. Tru-Torque Brake Cables are direct replacements parts.

Product Features:

• Inner cables are sheathed and lubricated to provide longer life and improved performance
• Flexible casings are completely covered with conduit to prevent corrosion of interior cables
• Zinc plated fittings and clips prevent corrosion
• Brackets included where applicable

Dorman's Window Regulators have been re-engineered to improve on the original design. The latest technological advances in motors, materials and cable systems have been applied to new and previously released applications.

Product Features:

• Engineered improvements enhance performance
• Quality tested to ensure trouble free installation, performance, and durability
• Plug & Play – No wire splicing necessary
• Features Anti-Pinch technology (where applicable) – Safety feature reduces risk to passengers

Direct replacement Hydraulic Brake Hoses are designed to fit specific vehicle applications and positions. This ensures a great fit every time. New hose replacement is recommended as part of a complete brake repair for your vehicle. The new hoses help to prevent loss of brake fluid and provide optimal brake performance.

Product Features:

• Quality construction ensures strength, chemical and thermal resistance for longer life
• Brake Hoses with banjo end fittings include new copper washers to ensure proper sealing
• All Brake Hoses are tested up to 4,000 PSI to ensure Safety standards are met
• Integral brackets, if applicable, included to ensure proper fit and ease of installation

Heavy-duty construction and unique design features make the Monroe Strut-Mate boot kit the quality choice for maximum rod protection and improved strut life. Damaged boots may not protect the rod finish. A pitted piston rod can lead to premature strut failure. Deteriorated OE bumpers may not offer adequate protection from severe suspension movement, leading to premature strut failure.

Product Features:

• Tie-Strap: Secures new boot to strut housing.
• Self Draining Design: Eliminates retention of moisture and other unwanted contaminants.
• Unique Boot Bumper Attachment Method: Simplifies installation.
• Boot: Provides rod protection from rust and corrosion enhancing service life.
• Soft Entry Jounce Bumper: Constructed of highest quality closed cell micro-cellular urethane for maximum durability, helps prevent severe impacts.

Fully integrated mounting wheel flange

Designed to provide enhanced endurance and maximum contamination exclusion while ensuring proper fit, form and function.

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

This Tester Adapter is used to expand the number of applications that a Stant pressure tester fits.

Monroe Gas-Matic passenger car struts are gas charged and provide improved control at an economical price.

Product Features:

• Available for import and domestic passenger cars
• Gas-charged unit
• Improved handling and control
• Economical OE replacement
• Meets OE product specifications

Winter blades are designed with a tough rubber boot to prevent the accumulation of snow and ice in the metal frame and to offer enhanced winter performance.

Product Features:

• Rubber boot locks out snow and ice
• All-metal construction for strength and durability in wet, wintery conditions
• Preattached universal adapter fits most vehicles directly

From the leader in aftermarket engine sealing, FEL-PRO the gaskets professionals trust.

Product Features:

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

From the leader in aftermarket engine sealing, FEL-PRO the gaskets professionals trust.

Product Features:

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

• Forged housing from specific materials provides strength and durability to prevent breakage
• Coated technology provides a smooth and durable surface to prevent corrosion and rust
• Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
• A slotted nut and cotter pin for a more secure installation

Factory Air Water Outlets are designed to meet or exceed original equipment specifications.

Magstar Racing Pro 100 Race Wire is a high-quality performance wire designed and produced to deliver more energy while silencing the detrimental effects of RFI and EMI.

Product Features:

• Low-resistance conductor delivers maximum energy
• High-temperature silicone jacket protects to 500°F
• High-performance ignition wire set that is designed to match form and fit of original equipment set

The fan clutch is the component of the cooling system that varies the fan speed to meet the cooling needs of the engine. The fan clutch provides high airflow volume and, by only operating the fan as needed, promotes good fuel economy. Imperial fan clutches are designed to meet OE performance specifications.

Product Features:

• Imperial Premium Fan Clutch
• Severe duty
• Designed, tested and built by application
• OE performance, fit and appearance

Engines & Ignition > Cylinder Block Components > Oil Pans, Pumps & Parts

Motorcraft Original Equipment Ignition Wires are designed, engineered and recommended by Ford Motor Company.

Product Features:

• Exact fit and length for precise installation
• The exact same part that was installed during engine assembly

Dorman offers a full range of universal expansion plugs for a variety of applications.

Wearever Gold brake pads are premium original equipment style replacement brake pads. Either Ceramic or Semi-Metallic depending your vehicles original equipment, Wearever Gold Brake Pads deliver superior stopping power and feature Advance Auto Part's exclusive multi-layer SoundLock noise dampening shim for ultra-quiet braking. Backed with a Limited Lifetime Warranty, Wearever Gold brake pads will provide the reliable stopping and performance you are looking for!

Product Features:

• Ceramic or semi-metallic OE replacement pads deliver superior stopping power
• Slots and chamfers match OE design for reliable performance
• Exclusive, multi-layer SoundLock shim provides ultra-quiet braking
• Limited Lifetime Warranty

Handy pack of five 3 amp ATC blade fuses.

Handy pack of five 40 amp ATC blade fuses.

Brakes, Steering & Suspension > Steering, Gears & Pumps > Tie Rod Ends & Related

Dorman’s Wheel Nuts and Locks are engineered to last and easy to use. Durably designed with a chrome finish, they blend in with the overall aesthetic design of your car, offering optimal security and appearance.

Product Features:

• Constructed of high-quality steel
• Resistant to rust, warping, and stripping
• Multiple lock designs available
• Quality-tested to ensure performance and durability

Sold separately, Dorman’s Wheel Nut Locks are engineered to last and easy to use. Durably designed with a chrome finish, they blend in with the overall aesthetic design of your car, offering optimal security and appearance.

Product Features:

• Constructed of high-quality steel
• Resistant to rust, warping, and stripping
• Also available in sets
• Multiple lock designs available

Sylvania Long Life Miniature Bulbs are built to perform for up to twice as long as a standard miniature bulb. Designed for durability, lower maintenance and greater safety.

ThermoQuiet semi-metallic brake pad set.

Product Features:

• OE matched shim configuration
• OE matched slots and chamfers

NTK Oxygen Sensors meet OE specifications for form, fit and function and have a direct-fit, OEM-style connector for installation.

MOOG Problem Solver products incorporate proven design and engineering features to ensure like new steering, ease of installation and longer life. MOOG is the preferred steering and suspension parts brand of professional technicians and NASCAR Crew Chiefs.

Product Features:

• Problem Solver® powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
• Patent pending Sunoloy coated metal bearings provide smooth stud swing technicians and drivers prefer.
• Problem Solver® patented cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life part.
• Exclusive cover plate protects against contaminants leaking into the bearing surface.

MOOG Problem Solver products incorporate proven design and engineering features to ensure like new steering, ease of installation and longer life. MOOG is the preferred steering and suspension parts brand of professional technicians and NASCAR Crew Chiefs.

Product Features:

• Problem Solver® powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
• Problem Solver® patented cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life part.
• Exclusive cover plate protects against contaminants leaking into the bearing surface.
• MOOG® engineered steel composition results in a stronger component.
• Full ball metal stud provides 360 degrees of smooth, consistent, rotational movement resulting in more responsive steering.
• Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.