EGR/Exhaust Air Supply Gasket to Molded Heater Hose

From the leader in aftermarket engine sealing, FEL-PRO the gaskets professionals trust.

Product Features:

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

Remanufactured crankshaft, micropolished, with matching rod and main bearings.

The NeoForm Wiper Blade features an aerodynamic spoiler that helps reduce wind-lift at highway speeds and enhances styling. The blade is designed to provide constant pressure across the entire length of the blade to help ensure a uniform wipe. NeoForm blades offer durable, all-weather performance, while the wiping edge features Teflon® surface protector to provide a long working life and a smooth wipe.

Product Features:

• Memory curve steel beam provides uniform pressure for a clean, clear wipe
• Twin-point coupler delivers constant, even pressure across the entire windshield
• Wiping element with Teflon® surface protector offers reduced friction for a smooth wipe and a long working life
• Designed with no exposed parts to prevent the accumulation of snow and ice, for enhanced all-weather performance

This direct OE replacement is engineered to work with the OE bracket on your vehicle. Includes any required washers or seals to complete proper installation. Made from top-grade pleated and rolled media and meets OE performance specifications.

Wearever Brake Pad Wear Sensors provide OE form, fit and function to enable your vehicle to determine the life left in its brake pads. The sensor wires come with necessary plugs and attaching hardware where necessary.

One 30 amp CBB ATC footprint circuit breaker.

Dorman’s Wheel Nuts and Locks are engineered to last and easy to use. Durably designed with a chrome finish, they blend in with the overall aesthetic design of your car, offering optimal security and appearance.

Product Features:

• Constructed of high-quality steel
• Resistant to rust, warping, and stripping
• Multiple lock designs available
• Quality-tested to ensure performance and durability

When it comes to your wheels, don’t take chances. Dorman’s Wheel Studs are produced to strict engineering quality standards. Our engineers design these parts with tight tolerance on specific part characteristics to ensure proper fit and function, this design provides assurance your wheels will be tight every time they are removed and installed.

Product Features:

• Direct replacement for a proper fit every time
• Corrosion resistant
• Double-ended studs as well as serrated bolts, and wheel bolts available
• Over-length and under-length studs available for convenience and ease of installation

An axle disc hardware kit with pins (upper/lower or inner/outer) that the caliper slides on. Replace old corroded pins and bolts which can hamper caliper movement and cause unnecessary and uneven pad wear.

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

• Forged housing from specific materials provides strength and durability to prevent breakage
• Coated technology provides a smooth and durable surface to prevent corrosion and rust
• Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
• A slotted nut and cotter pin for a more secure installation

All ToughOne axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.

Product Features:

• 100% New Axle
• Quality Engineered for Superior Durability
• Tested for Reliable Performance
• No Core Exchange

Dorman’s sturdy Exterior Door Handles stand up to severe weather conditions and years of handling. Plus, they’re designed for a proper fit every time, making installation easy. Paint yours, if desired, to match the original color.

Product Features:

• Includes spring and clips (where applicable)
• Smooth or textured surface available
• Chrome-plating available (where applicable)
• Available for front and rear driver and passenger sides

Dorman’s Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

Product Features:

• Direct replacement for a proper fit every time
• High quality steel construction
• Conveniently available in many styles and in packs of different quantities
• Dorman’s Spindle Nuts are constructed to strict engineering quality standards

XtraVision bulbs offer brighter light output for upgraded performance. Designed to provide up to 30% brighter light and up to 25% more down-road visibility.

Product Features:

• Legal for on-road use
• OE quality
• Lights dim over time
• Replace lights in pairs
• Made in the USA
• High-performance design can result in a product life that is less than that of a standard lamp

MSD Ignition control are easy to install, but we also offer several plug-in harnesses. These are especially handy for quick installation on late model vehicles! The harnesses plug directly into your factory coil and harness then four color coded wires plug into the corresponding wires of the MSD. Two wires go from the MSD to the battery and you’re done with no cutting or splicing!

Product Features:

• Plug-in harness with color coded wires
• No cutting or splicing which makes for an easy install
• Quick easy installation
• Provides a direct plug-in installation
• When adding an MSD Ignition control

From the leader in aftermarket engine sealing, FEL-PRO the gaskets professionals trust.

Product Features:

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

Fenco, a subsidiary of Motorcar Parts of America, has evolved to become a leader in the North American Automotive Aftermarket, offering multiple lines of both Remanufactured and New products.

Product Features:

• Premium Unloaded/Semi-Loaded/Loaded
• OEM Grade Rubber Components
• Correct OEM Specified Piston Material
• Essential Mounting Hardware Included
• Exclusive Rustproof Coating

Easy, straightforward and fast. Engineered with a built-in check valve that eliminates the need for specialized equipment, Dorman’s Brake Bleeder Screw lightens the task of releasing air and fluid from the brake system. What’s more, thread sealant is already applied, fortifying the screw against corrosion and securing it in place.

Product Features:

• Saves time and money by accomplishing the same function as special pressure or vacuum equipment
• Stainless, brass and zinc-coated to powerfully resist corrosion and stripping
• Direct replacement for a proper fit every time
• Universal application

High Performance Transmission Oil Cooler 3/4" x 7-1/2" x 15-1/2". Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4" x 7-1/2" x 15-7/8"
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion

Air, Fuel, Emission & Exhaust > Fuel & Oil Filters > Oil Filter Components

Dorman’s Clutch Pilot Bushing extends the life of the transmission and helps ensures smooth, reliable shift quality. Replacement recommended during clutch replacement

Product Features:

• Direct replacement for a proper fit every time
• High quality metal construction
• Ensures transmission longevity
• Replacement reduces driveline noise and vibration

Cooling & Heating > Radiators, Coolers & Related > Radiators Caps

Routine Maintenance > Filters > Oil Filters

MOOG Problem Solver products incorporate proven design and engineering features to ensure like new steering, ease of installation and longer life. MOOG is the preferred steering and suspension parts brand of professional technicians and NASCAR Crew Chiefs.

Product Features:

• Problem Solver® powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
• Problem Solver® patented cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life part.
• Full ball metal stud provides 360 degrees of smooth, consistent, rotational movement.
• Durable, all metal construction for longer life.
• Wrench flats at the base of the stud allow for a positive hold and the use of sockets for quick and easy installation and removal.
• Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.

Dorman’s Wheel Nuts and Locks are engineered to last and easy to use. Durably designed with a chrome finish, they blend in with the overall aesthetic design of your car, offering optimal security and appearance.

Product Features:

• Constructed of high-quality steel
• Resistant to rust, warping, and stripping
• Multiple lock designs available
• Quality-tested to ensure performance and durability

More like a complete kit than a single part, many of our Exhaust Manifolds include gaskets and hardware for a complete installation. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.

Product Features:

• Includes heat-shield for protection of hoses, wiring, and other engine components
• Cast iron or stainless tubular construction protects against warping and/or cracking
• Leak-resistant for long-lasting performance
• A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards

This brake hardware is manufactured to replace used, weakened hardware. Replacing the hardware will help ensure safer stops and a long performance life.

Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time.

Product Features:

• Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
• Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
• OE vane configuration to dissipate heat, increasing pad life.
• Proper harmonic design helps to reduce brake noise.
• Non-directional finish for less break-in time and reduced brake noise.
• Ready for immediate "out-of-the-box" installation (after cleaning)
  
  Advance Auto Parts Rotor Tips:

  • Recommend using Wearever Brake Clean to remove residual manufacturing oils prior to installation.
  • Always use a torque wrench to tighten wheel bolts to the manufacturers'' specifications to prevent pedal pulsation.
  • Always replace rotors in pairs to improve stopping power.

This Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a "quick connect" end, this Small I.D. Molded Heater Hose is also made with the quick connect assembled onto the hose for fast, convenient installation.