TAPER BEARING SET to Bleeder Screws M10-1.0 x 35mm

Designed to provide enhanced endurance and maximum contamination exclusion while ensuring proper fit, form and function.

Features platinum-to-platinum firing. Engineered to virtually eliminate gap erosion, reduce misfires, and provide up-to-100,000-mile durability. Designed for DIS engines.

Product Features:

• OE design for DIS systems
• Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
• Platinum ball welding process provides a consistent point of contact for enhanced adhesion
• Reduced Gap Erosion
• Works to optimize engine performance for a longer life and improved fuel economy

MOOG Problem Solver products incorporate proven design and engineering features to ensure like new steering, ease of installation and longer life. MOOG is the preferred steering and suspension parts brand of professional technicians and NASCAR Crew Chiefs.

Product Features:

• Allows adjustment range from negative 1 to 1 degree.

Fram Extra Guard Oil Filters use cellulose and synthetic glass blended media to promote enhanced engine protection. Fram's engine protection ratings are based on the filter's ability not to just trap dirt but to hold it for the life of the filter.

Product Features:

• Rated at 95% dirt-trapping efficiency

The Windflector greatly reduces sunroof wind noise and air turbulence. Prevents the rain from entering the sunroof opening while driving. Installs quickly and easily with strong automotive grade tape. Does not require drilling holes in your vehicles roof. Helps reduce heat buildup inside the vehicle.

Product Features:

• Reduces Wind Noise/Air Turbulence
• Prevents Rain from Entering Sunroof
• Helps Reduce Heat Buildup Inside Vehicle
• Installs Quickly and Easily
• Install with3M Adhesive Foam Tape
• Pop-Out Design
• For Removable Sunroofs
• Limited Lifetime Warranty

Castrol High-Mileage Automatic Transmission Fluid is a premium ATF that's specially formulated for maximum transmission life in high-mileage vehicles. Castrol High Mileage ATF has been engineered to help alleviate typical problems experienced by transmissions with over 75,000 miles, such as leaks and rough shifts. Newer vehicles will also benefit from this technologically advanced formulation.

Product Features:

• Additional seal conditioners to prevent or help stop leaks
• Extra cleaning agents to reduce varnish and sludge formation
• Protects against clutch wear
• Restores smooth shifting
• Greater frictional durability provides improved transmission performance

Value-priced seal meets all cataloged application requirements.

Routine Maintenance > Filters > Oil Filters

Exact Fit blades are manufactured to directly fit specific wiper arm types. The Exact Fit blade's receptor is designed to exactly match the arm style of your vehicle. After a simple snap or click, you'll be on your way.

Product Features:

• Correct adapter to fit your vehicle is pre-assembled to the blade
• Installation only takes seconds
• Designed to fit and function like the vehicle's original wiper blade
• All-metal construction for strength and durability

Dorman’s Spindle Nut Washers are coated for high corrosion resistance and a long service life. Depending on the application, they are also available in a kit that includes the nut, washer, and retainer.

Product Features:

• Direct replacement for a proper fit every time
• Conveniently available in packs of different quantities
• Durable steel construction
• Dorman’s Spindle Nut Washers are designed and constructed to strict engineering quality standards

All ToughOne axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.

Product Features:

• 100% New Axle
• Quality Engineered for Superior Durability
• Tested for Reliable Performance
• No Core Exchange

Designed to provide enhanced endurance and maximum contamination exclusion while ensuring proper fit, form and function.

This Tester Adapter is used to expand the number of applications that a Stant pressure tester fits.

Blocks dust, dirt, bacteria and pollution that can interrupt engine performance. Designed to offer consistent air flow to help increase horsepower and acceleration.

New construction to OEM specifications. Includes pins/clips were applicable. Organic braking material with premium binders.

Engineered from rubber for superior resistance to fuel, oil and heat, Dorman’s Fuel Injector O-rings maintain an air-tight seal. This complete kit, containing multiple rings in various sizes, makes installation fast and convenient. O-rings are recommended for replacement any time you service the fuel injectors.

Product Features:

• Naturally combats brittleness, cracking, and heat aging
• O-rings also sold separately
• Easy installation
• Quality tested to ensure durability

Direct replacement Wheel Cylinders are designed to fit specific vehicle applications and to ensure a proper fit every time. Normal wear may cause piston seals to leak. Corrosion and pitting can also occur inside Wheel Cylinders as moisture builds up in the brake fluid. A leaky Wheel Cylinder can be dangerous to the driver, causing gradual softening of the brake pedal and creating brake pull to one side.

Product Features:

• All Wheel Cylinders are made with high quality EPDM rubber cups and boots for long lasting performance
• Wheel Cylinder bores are surface tested to ensure an optimum sealing surface for the pressure cups
• Due to repair time and cost, it is more desirable to replace instead of repair Wheel Cylinders
• Recommended replacement is suggested when servicing drum brake

The Bosch Platinum+2 offers revolutionary firing technology, which combines the advantages of 2 nickel-yttrium ground electrodes, a pure platinum center electrode and surface air gap technology for optimum engine performance, smoother acceleration and better gas mileage.

Product Features:

• Revolutionary firing technology, featuring multiple spark paths, delivers a longer, more powerful spark for optimum engine performance
• Offers smoother acceleration, better gas mileage and optimum engine performance
• 2 yttrium-enhanced ground electrodes provides optimum access to the air/fuel mixture for more efficient combustion and a longer performance life

Each Tough One water pump is engineered by an expert team to keep your cooling system in optimal running condition. Each pump is built to stringent OE specifications by an OE manufacturer and is 100% factory tested, so you are guaranteed the highest quality product. All pumps are boxed with tri-lingual instructions, application specific information sheets and necessary hardware to get the job done.

Product Features:

• This pump is driven by the timing belt
• Timing belt should be replaced with the pump
• All gaskets or seals necessary for installation are supplied with pump
• Durable housing features precisely-machined mounting surfaces for proper sealing
• The latest impeller upgrades engineered for maximum coolant flow

Specially developed for each application. Sourced from OE approved suppliers based on the specific application. For the enthusiast who wants to maintain the OE braking performance.

Dorman offers a variety Wheel Bearing Dust Caps for a range of applications. All our Wheel Bearing Dust Caps are constructed of high-quality materials for long-lasting service.

Product Features:

• Save time, money and labor by replacing only the Wheel Bearing Dust Cap-instead of the entire wheel hub
• Protects wheel bearings by providing a tight seal against the elements
• Available in many different sizes
• Durable steel design

Gas-charged shock absorber that provides improved vehicle control for today's light trucks, vans, full-size picks-ups and 4x4's at an economical price.

Product Features:

• Available for import and domestic trucks, vans, full-size pick-ups and 4x4's
• Gas-charged unit
• Improved handling and control
• Economical OE replacement
• Meets OE product specifications

BWD clutch safety switches are manufactured to meet or exceed OE performance.

Xact wire sets are designed and engineered according to OE specifications to assure the same true fit and quality of the OE part.

Value-priced bearing meets all cataloged application requirements.

Airtex fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every Airtex Fuel Pump to deliver greater reliability.

Product Features:

• Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
• Triple barb hose fitting provides superior, long-lasting seal
• Superior return porting for optimum fuel flow
• Enhanced pump to flange harness design provides worry-free electrical performance
• Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
• Gradient density, dual zone filtration designed for better contamination resistance

MOOG Problem Solver products incorporate proven design and engineering features to ensure like new steering, ease of installation and longer life. MOOG is the preferred steering and suspension parts brand of professional technicians and NASCAR Crew Chiefs.

Product Features:

• Problem Solver® patented cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life part.
• Exclusive cover plate protects against contaminants leaking into the bearing surface.
• An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. MOOG® Problem Solver® design includes an oversized housing for a more secure fit.
• Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.

Sealed Power® rod bearings feature Statistically Controlled Production (SPC) processes that ensure strict dimensional tolerances to provide exceptional quality and optimal performance.

Ready to Install Brake Caliper comes with pre installed mounting bracket along with new critical hardware to reduce installation time up to 40%. In addition limiting brake system noise and vibration issues that can be caused by reusing old components such as worn-out mounting brackets that no longer conforms to manufacture specifications due to wear and rust. All calipers are tested through a multi stage process to ensure leak-free operation and 100% compatibility between all components and the vehicle.

Product Features:

• Pre Installed Mounting Bracket, reduces installation time by up to 40%
• Hardware Included
• 100% Pressure Tested
• OE Grade Seals
• Rust Inhibitor Coating
• Pre-assembled, ready to install

Easy, straightforward and fast. Engineered with a built-in check valve that eliminates the need for specialized equipment, Dorman’s Brake Bleeder Screw lightens the task of releasing air and fluid from the brake system. What’s more, thread sealant is already applied, fortifying the screw against corrosion and securing it in place.

Product Features:

• Saves time and money by accomplishing the same function as special pressure or vacuum equipment
• Stainless, brass and zinc-coated to powerfully resist corrosion and stripping
• Direct replacement for a proper fit every time
• Universal application