DEX III/M Automatic Transmission Fluid (1 qt.) to Platinum+2 Spark Plug

• Formulated for older model Ford and General Motors vehicles
• Suitable for transmissions requiring MERCON®, DEXRON-I®, DEXRON-II® and DEXRON-III® automatic transmission fluid
• Not for use in transmissions that specify MERCON V®, MERCON SP®, DEXRON-VI® or Type F

• Cardone Select Engineered (CSE) Technology ensures that all window lift motors meet or exceed O.E. form, fit and function.
• 100% Load Testing ensures performance every time.
• Units are designed with extra torque motors to prevent premature failure resulting from improperly lubricated window lift regulators.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Brushes are precisely designed to ensure armature and contacts are properly matched
• Improved over O.E. - Cardone Select Gears are designed with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.

• Formulated for older model Ford and General Motors vehicles
• Suitable for transmissions requiring MERCON®, DEXRON-I®, DEXRON-II® and DEXRON-III® automatic transmission fluid
• Not for use in transmissions that specify MERCON V®, MERCON SP®, DEXRON-VI® or Type F

• High quality plastic and/or steel construction
• Easy installation
• Direct replacement for a proper fit every time
• Quality-tested to ensure trouble-free performance and durability

• Outstanding sludge resistance provides superior transmission life
• Enhanced friction durability helps improve shifting performance
• Certified and approved by General Motors for all cars and trucks that require DEXRON®-VI
• Also satisfies requirements of DEXRON®, DEXRON®-III H, III, IIE and II

• Save time, money and labor by replacing only the Wheel Bearing Dust Cap-instead of the entire wheel hub
• Protects wheel bearings by providing a tight seal against the elements
• Available in many different sizes
• Durable steel design

• 100% computer testing ensures consistent performance.
• 100% new OE-quality seals and cups are installed to prevent leakage and ensure like-new performance and reliability. All rubber meets S.A.E. specifications.
• Cast iron master cylinders come with premium protective coating to minimize rust, extending on-car and on-shelf life.
• Piston assemblies are 100% height-gauged to meet or exceed O.E. performance.
• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, which could cause premature failure.
• Plastic reservoirs are 100% vacuum-tested to ensure proper function.

• Rated at 95% dirt-trapping efficiency

• Ceramic or semi-metallic OE replacement pads deliver superior stopping power
• Slots and chamfers match OE design for reliable performance
• Exclusive, multi-layer SoundLock shim provides ultra-quiet braking
• Limited Lifetime Warranty

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Motor magnets are 100% recharged for superior performance and reliability.

• Thermoplastic bushings are resistant to heat, wear, salt, road grime and oils.

• Cardone Select Engineered (CSE) Technology ensures that all wiper motor pulse boards meet or exceed O.E. form, fit and function.
• Improved over O.E. - Mechanically anchored connectors by way of thru-hole soldering results in stronger, longer lasting electrical connections.
• Unit includes plastic back plate and mounting screws for hassle-free installation.

• Problem Solver® powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
• Problem Solver® patented cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life part.
• Exclusive cover plate protects against contaminants leaking into the bearing surface.
• MOOG® engineered steel composition results in a stronger component. Full ball metal stud provides 360 degrees of smooth, consistent, rotational movement resulting in more responsive steering.
• An enlarged ball joint receptacle in the lower control arm can cause a loose ball joint fit. MOOG® Problem Solver® design includes an oversized housing for a more secure fit.
• Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.

• Pre Installed Mounting Bracket, reduces installation time by up to 40%
• Hardware Included
• 100% Pressure Tested
• OE Grade Seals
• Rust Inhibitor Coating
• Pre-assembled, ready to install

ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and Aftersales, a division of General Motors. ACDelco employs a two- or three-tiered distribution model, utilizing a network of appointed wholesale distributors to service independent installers, ACDelco independent service centers, retail and fleet customers.

• Problem Solver® powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
• Problem Solver® patented cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life part.
• Exclusive cover plate protects against contaminants leaking into the bearing surface.
• MOOG® engineered steel composition results in a stronger component. Full ball metal stud provides 360 degrees of smooth, consistent, rotational movement resulting in more responsive steering.
• An enlarged ball joint receptacle in the lower control arm can cause a loose ball joint fit. MOOG® Problem Solver® design includes an oversized housing for a more secure fit.
• Premium polychloroprene sealed boot includes grease relief valve to keep contaminants out.

• Wheel nut covers also available
• Easy to install
• Available in different quantities and packaging options
• Chrome wheel nut & lock kits available (where applicable)

• 1-3/8" Bore: Lower operating pressure than standard 1" bore units
• 2" Reserve Tube: More fluid for more consistent performance.
• 5/8" Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
• All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
• Full Displaced Valving: Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
• Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
• Special Seal: "Self-lubricating" fluid seal designed to retain gas without excessive wear or friction.

• Revolutionary firing technology, featuring multiple spark paths, delivers a longer, more powerful spark for optimum engine performance
• Offers smoother acceleration, better gas mileage and optimum engine performance
• 2 yttrium-enhanced ground electrodes provides optimum access to the air/fuel mixture for more efficient combustion and a longer performance life