Wheel Hub Dust Caps - Ford 2007-68 to Window Lift Motor - Remanufactured

• Save time, money and labor by replacing only the Wheel Bearing Dust Cap-instead of the entire wheel hub
• Protects wheel bearings by providing a tight seal against the elements
• Available in many different sizes
• Durable steel design

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.

• Triple gasket-sealing process virtually eliminates gas leakage past the shell
• 99% highly pure alumina silicate insulator enables use of longer insulator noses to reduce fouling
• 3-step trivalent-plating process uses silver chromate and zinc for enhanced corrosion resistance

• Formulated for older model Ford and General Motors vehicles
• Suitable for transmissions requiring MERCON®, DEXRON-I®, DEXRON-II® and DEXRON-III® automatic transmission fluid
• Not for use in transmissions that specify MERCON V®, MERCON SP®, DEXRON-VI® or Type F

• Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
• Triple barb hose fitting provides superior, long-lasting seal
• Superior return porting for optimum fuel flow
• Enhanced pump to flange harness design provides worry-free electrical performance
• Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
• Gradient density, dual zone filtration designed for better contamination resistance

• Inner cables are sheathed and lubricated to provide longer life and improved performance
• Flexible casings are completely covered with conduit to prevent corrosion of interior cables
• Zinc plated fittings and clips prevent corrosion
• Brackets included where applicable

• Saves time and money by accomplishing the same function as special pressure or vacuum equipment
• Stainless, brass and zinc-coated to powerfully resist corrosion and stripping
• Direct replacement for a proper fit every time
• Universal application

• Remanufactured through rigorous Triple Testing processes.
• All components undergo the highest quality inspections following TS 16949 certified standards.
• Advanced re-engineering, precision remanufacturing processes guarantee quality and performance to meet or exceed OE standards.
• Free Tech Line staffed by ASE Certified Technicians to answer fitment, technical and other questions.
• One year warranty gives you peace of mind

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

• 100% New Axle
• Quality Engineered for Superior Durability
• Tested for Reliable Performance
• No Core Exchange

Professional technicians trust and value MOOG because of their reputation for solving problems. Vehicle owners who use MOOG parts enjoy responsive handling and the return of a "like-new" feel to their steering. And for more than 40 years, every NASCAR Cup champion has relied on MOOG ball joints for performance and durability.

Federal-Mogul MOOG chassis parts improve upon existing designs to deliver a "problem-solving" replacement product. MOOG is constantly working to develop new products that improve steering performance. The innovations Federal-Mogul engineers develop for the track, are reapplied for the street. Federal-Mogul has been the recognized leader in steering solutions for NASCAR for years.

• Built with strong and robust separators leading to a reduced chance of battery failures due to shorts
• Lifespan™ negative paste formulation won''t flake off over time, and the extreme bond improves performance and increases life
• Powerframe™ grid manufacturing process produces a strong, efficient grid for high performance
• Circatech™ rounded corners on negative plates eliminate separator shorts
• Vent caps feature a safe design to help reduce leakage and corrosion
• Corrosion-resistant terminals; 100% copper conductor; flexible PVC insulation

• Formulated for Chrysler vehicles
• Suitable for transmissions requiring ATF+®, ATF+2®, ATF+3® or ATF+4® automatic transmission fluid
• Engineered to provide smooth performance in low and high temperatures

• Comes with two bolts and one bearing retainer strap-all the hardware necessary for a complete repair
• Available individually or in an assortment that contains two different u-joint straps and four bolts for broad coverage
• Provides a secure fit for the universal joint in the differential yoke
• Durable steel design

• Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
• Advanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.
• High-performance pump section assembly provides superior performance
• Leading-edge inlet design to increase performance and efficiency, leading to longer life
• High grade outer shell for life-long corrosion resistance
• Optimized, precision-wound armature assembly for increased performance

• Imperial Maxi-Cool® plate and fin transmission cooler
• Size: 3/4" x 11" x 7-1/2"
• Mid-size and full-size cars, pickups
• GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

• Pre Installed Mounting Bracket, reduces installation time by up to 40%
• Hardware Included
• 100% Pressure Tested
• OE Grade Seals
• Rust Inhibitor Coating
• Pre-assembled, ready to install

• OE Fit
• OE Form
• OE Function

• Advanced Ceramic Friction Formulas for Enhanced stopping power and longer life
• Ceramic formulas for Cleaner wheels
• 3 layer premium shims, slots, wear sensors and chamfers - Ultra-quiet braking
• Designed to provide safety and confidence while braking

• Original Equipment fit and form
• Dependable stopping power
• Single-layer shim absorbs noise and vibration for consistently quiet braking
• Limited Lifetime Warranty

• 1/2" Piston Rod: Hardened and precision ground rod for consistent performance and long service life.
• All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
• Full Displaced Valving: Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
• Large Volume Air Chamber: Inflates up to 150 psi with vehicle loaded. Deflates for normal driving.
• Lubricated Air Sleeve: Reduces friction for longer service life. Provides smoother operation during suspension movement.
• Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
• Special Air Fitting: Resists air leakage.

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.